Efficient synthesis of optically active α-substituted glutamate analogs possessing α-hydroxymethyl and α-alkoxymethyl groups

Highly enantioselective synthesis of (2R)-α-(hydroxymethyl)glutamate (1), a selective agonist of mGluR2 and 3, was achieved in short steps using an asymmetric version of the Strecker synthesis. This was converted into its α-methoxymethyl- and α-benzyloxymethyl derivatives 2 and 3, possible ligands as tools to investigate glutamate receptors, via protection of the sterically hindered amino group by means of phase transfer catalyst.     

Synthesis and evaluation of 6-nitro-7-(1-piperazino)quinazolines: dual-acting compounds with inhibitory activities toward both tumor necrosis factor-alpha (TNF-alpha) production and T cell proliferation

We investigated the chemical modifications of the nitroquinazoline derivative (1) through the replacement of the NH group at the C(4)-position with several N-alkyl groups to increase the lipophilicity at the C(4)-position. Among them, we found that the N-methyl analogue (5a) showed a 2-fold loss in the inhibitory activity toward tumor necrosis factor-alpha (TNF-alpha) production in vitro as compared with the NH analogue (1); however, 5a exhibited an oral inhibitory activity on TNF-alpha production with an ED50 value of 26 mg/kg, whereas 1 did not. Moreover, the oral bioavailability of 5a was higher than that of 1 (1, F=1%; 5a, F=21%), and the calculated ClogP value for 5a was higher than that for 1. These results suggest that the improved lipophilicity of 5a compared with that of 1 reflects its greater inhibitory activity on TNF-alpha production in vivo as well as oral bioavailability.     

Formation,structure, and structural properties of a new filamentary tubular form: hollow conical-helix of graphitic boron nitride

A novel tubular form of graphitic boron nitride (BN) displaying a hollow conical-helix was discovered. It was generated via wrapping a single beltlike filament according to the geometry of an Archimedes spiral. Cone apex angles of helical-conical nanotubes (HCNTs) were found to exhibit specific values, each of which refers to a certain coincidence site lattice. A unique structural property of HCNTs was observed, displaying the transformation of apex angles during the annealing process. The observed apex angles were reduced with decreasing annealing temperature, which is in accordance with an estimated HCNT strain energy decrease for a given tubular radius. It is suggested that the curvature and apex angle of a HCNT are determined by a sole dynamic element, that is, enthalpy (DeltaH), whereas the HCNT disclination configuration changes through helical sliding of the filament.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Determination of cadmium in river water by sequential metal vapor elution analysis

Determination of cadmium in river water by sequential metal vapour elution analysis (column temperature; > 1500 K) with argon and hydrogen carrier gas and with atomic absorption spectrometric detection is described. The column is made of a molybdenum capillary tube (i.d. 1.22 mm) and the temperature is 1760 K. The cadmium vapor was separated from those of calcium, iron and sodium. The calibration graph was linear up to 15 μ/ml. Relative standard deviations of 0.8–4.3% were obtained in the range 1 to 15 μ/ml. Cadmium in spiked samples (river water) was determined. The results were in good agreement with the amount spiked.     

Solvothermal synthesis of large surface area zirconia

The reaction of zirconium n-propoxide in glycol at 300°C yielded microcrystalline tetragonal zirconia (ZrO₂). The crystallite size of the product depended on the carbon number of the glycol and increased in the following order (carbon number of glycol): 2<6<4, which suggested that the heterolytic cleavage of O-C bond of gylcoxide formed by transesterification is the prime factor for the formation of the product. In toluene, zirconium isopropoxide also gave tetragonal zirconia at 300°C, and zirconium tert-butoxide decomposed at 200°C yielding amorphous zirconia, while zirconium n-propoxide was stable at 300°C. These results suggest that the reaction in toluene depends on the structure of the alkyl group of the alkoxides. Thus-obtained tetragonal zirconias maintained large surface areas (90–160 m²/g) even after calcination at 500°C.     

5-[4-(1-Hydroxyethyl)phenyl]-10,15,20-triphenylporphyrin as a probe of the transition-state conformation in hydrolase-catalyzed enantioselective transesterifications

5-[4-(1-Hydroxyethyl)phenyl]-10,15,20-triphenylporphyrin (1a) and zinc porphyrin 1b were designed and synthesized to experimentally examine the validity of the transition-state model previously proposed for the lipase-catalyzed kinetic resolution of secondary alcohols. The lipases from Pseudomonas cepacia (lipase PS), Candida antarctica (CHIRAZYME L-2), Rhizomucor miehei (CHIRAZYME L-9), and Pseudomonas aeruginosa (lipase LIP) exhibited excellent enantioselectivity (E >100 at 30 degrees C). Subtilisin Carlsberg from Bacillus licheniformis (ChiroCLEC-BL) also showed high enantioselectivity for 1a (E = 140 at 30 degrees C), and the thermodynamic parameters were determined: DeltaDeltaH = -6.8 +/- 0.8 kcal mol(-1), DeltaDeltaS = -13 +/- 3 cal mol(-1) K(-1). Lipases and subtilisin showed R- and S-preference for 1, respectively. The mechanisms underlying the experimental observations are explained in terms of the transition-state models. The large secondary alcohol 1 is a powerful tool for investigating the conformation of the transition state of the enzyme-catalyzed reactions. The fact that 1 was resolved with high enantioselectivity strongly suggests that the gauche conformation, but not the anti conformation, is taken in the transition state, in agreement with the transition-state models involving the stereoelectronic effect.     

One‐Pot Synthetic Procedure for2,2′‐Disubstituted Biaryls via the Suzuki Coupling Reaction of Aryl Triflates in a Biphasic Solvent System

A one‐pot synthetic procedure for 2,2′‐disubstituted biaryls was developed via a Suzuki cross‐coupling reaction of aryl triflates in a biphasic solvent system. The effects of various bases and solvents were investigated. Results showed that the Na₂CO₃–toluene/H₂O combination gave the highest yields.     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.