Nickel metallisation of Si by dynamic ion-beam mixing

Abstract

Thin Ni films were prepared at room temperature by Ni metal vapour deposition and simultaneous irradiation by Ar ions with an energy of 2–20 keV. The reaction of Ni with Si during dynamic ion-beam mixing was studied. The fluences of the ion beam were 4.7 × 10¹⁷ and 8.9 × 10¹⁷ cm^?2, and arrival rate ratios Ni/Ar were 9.7 and 5.1. Concentration profiles of Ni, Si, C, and O were analysed with Auger electron spectroscopy; the surface morphology and the crystalline structure were investigated with a cross-sectional scanning electron microscope and X-ray diffractometry. The theoretical profiles were calculated with the dynamic Monte Carlo simulation T-DYN for comparison with the experimentally obtained profiles. It was possible to observe the ballistic mixing effects and also thermally activated formation of nickel silicide.     

Saccharide Recognition by a Three-Arm-Shaped Host Having Preorganized Three-Dimensional Hydrogen-Bonding Sites

Generally, cage-shaped hosts for saccharides can bind strongly to guest molecules because of the three-dimensional preorganized hydrogen-bonding sites. However, the preparation of cage molecules is often difficult because of the low yield of the macrocyclization step. Here, we report a three-arm-shaped molecule possessing pyridine-acetylene-phenol units as a new kind of host having a preorganized three-dimensional hydrogen-bonding site. This three-arm-shaped host was readily prepared compared to a cage-shaped analogue. This host associated with lipophilic glycosides to form chiral complexes, and the association constants were sufficiently high as to be comparable to those of the cage-shaped analogue. Furthermore, this host extracted native monosaccharides into a lipophilic solvent.     

Tentative Comparison of Tube Radial Distribution Chromatography and CZE

Tube radical distribution chromatography (TRDC) uses an untreated open tubular capillary tube and a ternary mixture of solvents (water and hydrophilic/hydrophobic organic solvents) as a carrier solution. A model analyte mixture comprising 1-naphthol, 1-naphthoic acid, 1-naphthalenesulfonic acid, 2,6-naphthalenedisulfonic acid, and 1,3,6-naphthalenetrisulfonic acid was examined by the TRDC and capillary zone electrophoresis (CZE) systems that comprised mainly a capillary tube and a detector. In the TRDC system the elution order of analytes could be changed by altering the component ratios of the solvents, whereas in the CZE system the elution order was changed by altering the electroosmotic flow direction. The experimental data obtained provide clues about the features and utility of TRDC as a new separation method.     

<Emphasis Type="Italic">C</Emphasis><Superscript>1</Superscript>-Classification of Gapped Parent Hamiltonians of Quantum Spin Chains

We consider the C ¹-classification of gapped Hamiltonians introduced in Fannes et al. (Commun Math Phys 144:443–490, 1992) and Nachtergaele (Commun Math Phys 175:565–606, 1996) as parent Hamiltonians of translation invariant finitely correlated states. Within this family, we show that the number of edge modes, which is equal at the left and right edge, is the complete invariant. The construction proves that translation invariance of the ‘bulk’ ground state does not need to be broken to establish C ¹-equivalence, namely that the spin chain does not need to be blocked.     

Vinyl Polymerization by Metal Complexes. XXIII. UV and Kinetic Studies on the Photopolymerization with Iron(III)-Amine-Carbon Tetrachloride Systems

Abstract

In order to elucidate the initiation reaction of the photopolymerization with iron(III)-amine-carbon tetrachloride systems, the photochemical reaction process among iron(III), amine, and carbon tetrachloride in methanol solution was followed at 0°C by UV spectroscopy as for iron(III) ion. The rate constants of both the reduction of iron (III) under irradiation with light and the oxidation of iron(II) in the dark were measured, and were related to the rates of photopolymerization of methyl methacrylate. Kinetic study on the photopolymerization of methyl methacrylate with iron(III)-triethylenetetramine-carbon tetrachloride system was made in parallel in methanol solution at 0°C. The initiation mechanism of the photopolymerization was postulated.     

Thermal behavior and dismantlability of adhesives containing various inorganic salts

As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts.     

Synthesis,Structure, and Reactivity of Lewis Base Stabilized Plumbacyclopentadienylidenes

Plumbacyclopentadienylidenes, in which the lead atoms have divalent states and are coordinated by THF, pyridine and N‐heterocyclic carbene, were synthesized and characterized. The THF‐ and pyridine‐stabilized compounds can be regarded as rare examples of hypervalent 10‐X‐4 species. The equilibrium between the THF adduct and the free plumbacyclopentadienylidene was evidenced by spectroscopic analysis and theoretical calculations. The THF adduct in benzene converted into a plumbylene dimer, where one of the lead centers is coordinated by THF and the other lead atom is coordinated by a divalent lead atom, the dimer gradually decomposing into spiroplumbole. The THF adduct unexpectedly reacted with trifluoroborane and trichlorogallane to afford fluoroborole and chlorogallole, which are the first examples of non‐annulated fluoroborole and gallole, respectively.     

Reduction Reaction of the Copper(II) Complex Bearing 1,3-Di(pyridine-2-carboxaldimino)propane (pitn) by Decamethylferrocene in Acetonitrile

The reduction reaction of the Cu(II)–pitn complex (pitn = 1,3-di(pyridine-2-carboxaldimino)propane) by decamethylferrocene [Fe(Cp*)₂] was examined in acetonitrile. The observed pseudo-first-order rate constants exhibited saturation kinetics with increasing excess amount of [Fe(Cp*)₂]. Detailed analyses revealed that the reaction is controlled by a structural change prior to the electron transfer step, rather than a conventional bimolecular electron transfer process preceded by ion pair (encounter complex) formation. The rate constant for the structural change was estimated to be 275 ± 13 s^?1 at 298 K (?H* = 33.3 ± 1.0 kJ·mol^?1, ?S* = 86 ± 5 J·mol^?1·K^?1), which is the fastest among gated reactions involving CuN₄ complexes. It was confirmed by EPR measurement and Conflex calculations that the dihedral angle between the two N–N planes is significantly large (40°) in solution whereas it is merely 17.14° in the crystal.     

Complex formation of light and heavy lanthanides with DGA and DOODA,and its application to mutual separation in DGA–DOODA extraction system

We studied the stepwise formation constants (β) of water-soluble diglycolamide (DGA) and dioxaoctanediamide (DOODA) for the mutual separation of Ln in a solvent extraction system. TODGA (N,N,N?,N?-tetraoctyl-diglycolamide) and DOODA(C8) (N,N,N?,N?-tetraoctyl-dioxaoctanediamide) exhibit opposite behaviors in extracting both light and heavy Ln through Ln-patterns. Metal complexes of two- and three-folding with water-soluble DOODA and DGA, respectively, were found, and each β value was calculated using distribution ratios. Taking β, their distribution ratio, D, and separation factor, SF, values into consideration, the suitable separation conditions (aqueous phase: 30 mM DOODA(C2) in 1 M HNO₃; organic phase: 0.1 M TODGA in n-dodecane) of multistage extraction (10?×?10 extraction using aqueous and organic phases, including one sample solution) were determined. In this study, La, Pr, and Nd were mainly present in the aqueous phase, whereas Sm–Dy existed in the organic phase. Although these two groups can be easily separated into two phases, the resolution, Rs, values provide for little mutual separation between La–Nd and Sm–Dy under the present conditions.