Expert systems for method development and validation in HPLC

ESCA, Expert Systems Applied to Chemical Analysis, started its research in March 1987, with the aim of building prototype expert systems for HPLC method development. Results of this research have been published as the work has progressed. The project is now completed and this paper summarises some of the overall project conclusions. Seven different expert systems have been built which tackle problems throughout the process of method development, four stand-alone systems and three integrated systems. The object of ESCA was to evaluate the applicability of expert system technology to analytical chemistry and not all the systems were built for commercial uses. Many of the systems tackle problems specific to one or more of the partners and thus may not be useful outside this environment. However, the results of the work are still pertinent to analysts wishing to build their own systems. These results are described, however, the emphasis of the paper is on those systems developed for method validation.Method validation for HPLC is a complex task which requires many characteristics of the method to be tested, e.g. accuracy, precision, etc. The expert systems built within ESCA concern the validation of precision. Two systems were developed for repeatability testing and ruggedness testing. The method validation process can be divided into several discrete stages, these include: (1) The selection of the method feature to test, for instance which factors can influence the ruggedness of a method. (2) The definition of a test procedure, for instance an efficient statistical design. (3) The execution of experiments and the interpretation of results. (4) A diagnosis of any observed problem. This paper describes these two systems in some detail and summarises some of the results obtained from their evaluation. It concludes that expert systems can be useful in solving analytical problems and the integration of several expert systems can provide extremely powerful tools for the analyst.     

Decrease in langerhans cells and increase in lymph node dendritic cells following chronic exposure of mice to suberythemal doses of solar simulated radiation

Exposure of certain strains of mice to ultraviolet radiation (UVR) causes suppression of some innate and adaptive immune responses. One such consequence of acute UVB exposure is a reduction in the number of Langerhans cells (LC) in the epidermis and an increase in dendritic cells (DC) in lymph nodes draining the irradiated skin sites. Exposure to chronic UVB irradiation also has effects on the immune system, but it is unknown what effects are caused by repeated doses of solar simulated radiation (SSR). Consequently, the main aims of the present study were to determine whether repeated exposure to low doses of SSR would lead to similar changes in these cell populations and whether chronic doses of SSR activate a protective photoadaptation mechanism. Groups of C3H/HeN mice were irradiated daily with 3.7 J/cm(2) SSR from Cleo Natural lamps for 2, 10, 20, 30 or 60 days. Further groups of mice received an additional dose of 7.4 J/cm(2) SSR on days 2, 10, 30 or 60 to test for photoadaptation. The numbers of LC in the epidermis and DC in the lymph nodes draining irradiated skin sites were counted 24 h after the final irradiation. With the exception of mice irradiated for only 2 days, LC were significantly reduced throughout the chronic irradiation protocol, and no recovery occurred. DC numbers were significantly increased in the draining lymph nodes of mice irradiated for 20 days and 60 days.     

Solvothermal synthesis and structure of a new selenium-rich selenophosphate K(3)PSe(4).2Se(6)

The compound K(3)PSe(4).2Se(6) was synthesized at 110 degrees C via solventothermal techniques from binary starting materials and Se in acetonitrile. The compound crystallizes in the space group Fd macro 3 of the cubic system with eight formula units in a cell with a dimension of a = 16.415(2) A at T = 193 K. The structure contains an unusual intermixing of ionic and uncharged species. The selenophosphate tetrahedral trianions PSe(4)(3-) are surrounded by potassium cations; other potassium cations in the structure are coordinated to 12 selenium atoms from four Se(6) rings in a tetrahedral arrangement. There are no short contacts between adjacent selenium rings. Heating the same reaction mixture to 160 degrees C results in the formation of only needles of trigonal selenium.     

Dynamic kinetic resolution of racemic tropic acid ethyl ester and its derivatives

The dynamic kinetic resolution of racemic mixtures of tropic acid ethyl ester under substrate racemizing conditions was studied using lipase PS with a ruthenium catalyst. Isopropenyl acetate was used as an acyl donor, since it was found to be compatible with both catalysts; this resulted in an efficient dynamic kinetic resolution. With this process, a variety of racemic tropic acid ethyl esters were transformed to optically active acetoxy-2-arylpropionic acid ethyl esters with 60-88% yields and 53-92% ee.     

FREQUENCY OF ULTRAVIOLET RADIATION-INDUCED MUTATION AT THE hprt LOCUS IN REPAIR-PROFICIENT MURINE FIBROBLASTS TRANSFECTED WITH THE denV GENE OF BACTERIOPHAGE T4

Abstract— Thc frequency of spontaneous and ultraviolet radiation (UVR)-induced mutation at the hprt locus was determined in control and denV-transfected, repair-proficient murine fibroblasts. Control cells removed an average of 25% of pyrimidine dimers induced by exposure to 150 J/m²UVR from an FS40 sunlamp within 24 h; under the same conditions of induction and repair, denV-transfected cells removed an average of 71% of pyrimidine dimers. Control cells were somewhat more resistant than denV-transfected cells to killing by UVR. The average frequency of spontancous mutation at the hprt locus for control and denV-transfected cells was 3 and 15 6-thioguanine (6-TG)-resistant colonies per 10⁶ surviving cells, respectively; there was no statistically significant difference between control and dcnV-transfected cells. However, after exposure to 75 or 150 J/m² UVR, denV-transfected cells had a significantly lower frequency of mutation to 6-TG resistance. After exposure to a fluence of 75 J/m², the average frequency of UVR-induced mutation at the hprt locus was 166 mutant colonies per lo^h surviving cells for control cells and 92 mutant colonies for denV-transfectcd cells; after 150 J/m², control cells had 205 6-TG-resistant colonies per 10⁶ cells, while dmV-transfected cclls had 61 mutant colonies. These results demonstrate that UVR-induced pyrimidine dimers are mutagenic photoproducts in mammalian cells.     

The two-photon excitation cross section of 6MAP, a fluorescent adenine analogue

6MAP is a fluorescent analogue of adenine that undergoes Watson-Crick base pairing and base stacking in double-stranded DNA. The one-photon absorption spectrum of 6MAP is characterized by a maximum around 330 nm with moderate quantum yield fluorescence centered at about 420 nm. To take advantage of this probe for confocal and single-molecule microscopy, it would be advantageous to be able to excite the analogue via two photons. We report the first determination of the two-photon excitation cross section and spectrum for 6MAP from 614 to 700 nm. The power dependence of the fluorescence indicates that emission results from the absorption of two photons. The one-photon and two-photon emission line shapes are identical within experimental error. A study of the concentration dependence of the fluorescence yield for one-photon excitation shows no measurable quenching up to about 5 microM. The maximum in the two-photon excitation spectrum gives a two-photon cross section, delta(TPE), of 3.4 +/- 0.1 Goeppert-Mayer (G.M.) at 659 nm, which correlates well with the one-photon absorption maximum. This compares quite favorably with cross sections of various naturally fluorescent biological molecules such as flavins and nicotiamide. In addition, we have also obtained the two-photon-induced fluorescence emission spectrum of quinine sulfate. It is approximately the same as that for one-photon excitation, suggesting that two-photon excitation of quinine sulfate may be used for calibration purposes.     

Comparison of the Bonding of Benzene and C60 to a Metal Cluster: Ru3(CO)9(μ3-η2,η 2,η2-C6H6) and Ru3(CO)9(μ3-η2,η2,η2-C60)

The electron distributions and bonding in Ru₃(CO)₉( ³- ², ², ²-C₆H₆) and Ru₃(CO)₉( ³- ², ², ²-C₆₀) are examined via electronic structure calculations in order to compare the nature of ligation of benzene and buckminsterfullerene to the common Ru₃(CO)₉ inorganic cluster. A fragment orbital approach, which is aided by the relatively high symmetry that these molecules possess, reveals important features of the electronic structures of these two systems. Reported crystal structures show that both benzene and C₆₀ are geometrically distorted when bound to the metal cluster fragment, and our ab initio calculations indicate that the energies of these distortions are similar. The experimental Ru–C_fullerene bond lengths are shorter than the corresponding Ru–C_benzene distances and the Ru–Ru bond lengths are longer in the fullerene-bound cluster than for the benzene-ligated cluster. Also, the carbonyl stretching frequencies are slightly higher for Ru₃(CO)₉( ³- ², ², ²-C₆₀) than for Ru₃(CO)₉( ³- ², ², ²-C₆H₆). As a whole, these observations suggest that electron density is being pulled away from the metal centers and CO ligands to form stronger Ru–C_fullerene than Ru–C_benzene bonds. Fenske-Hall molecular orbital calculations show that an important interaction is donation of electron density in the metal–metal bonds to empty orbitals of C₆₀ and C₆H₆. Bonds to the metal cluster that result from this interaction are the second highest occupied orbitals of both systems. A larger amount of density is donated to C₆₀ than to C₆H₆, thus accounting for the longer metal–metal bonds in the fullerene-bound cluster. The principal metal–arene bonding modes are the same in both systems, but the more band-like electronic structure of the fullerene (i.e., the greater number density of donor and acceptor orbitals in a given energy region) as compared to C₆H₆ permits a greater degree of electron flow and stronger bonding between the Ru₃(CO)₉ and C₆₀ fragments. Of significance to the reduction chemistry of M₃(CO)₉( ³- ², ², ²-C₆₀) molecules, the HOMO is largely localized on the metal–carbonyl fragment and the LUMO is largely localized on the C₆₀ portion of the molecule. The localized C₆₀ character of the LUMO is consistent with the similarity of the first two reductions of this class of molecules to the first two reductions of free C₆₀. The set of orbitals above the LUMO shows partial delocalization (in an antibonding sense) to the metal fragment, thus accounting for the relative ease of the third reduction of this class of molecules compared to the third reduction of free C₆₀.     

On the lower Markov spectrum

C. Hightower found two infinite sequences of gaps in the Markov spectrum, ( _n , _n ) and ( _n , _n ) with _n and _n both Markov elements, converging to . This paper exhibits Markov elements _n ^* and _n ^* such that, for alln 1, ( _n ^* , _n ) and ( _{n n} ^* ) are gaps in the Markov spectrum. Other results include showing that, for alln 1, _n is completely isolated, while the other endpoints of the gaps are limit points in the Markov spectrum.