Experimental and modeling assessment of sulfur release from coal under low and high heating rates

Coal combustion releases elevated amounts of pollutants to the atmosphere including SO_X. During the pyrolysis step, sulfur present in the coal is released to the gas phase as many different chemical species such as H₂S, COS, SO₂, CS₂, thiols and larger tars, also called SO_X precursors, as they form SO_X during combustion. Understanding the sulfur release process is crucial to the development of reliable kinetic models, which support the design of improved reactors for cleaner coal conversion processes. Sulfur release from two bituminous coals, Colombian hard coal (K1) and American high sulfur coal (U2), were studied in the present work. Low heating rate (LHR) experiments were performed in a thermogravimetric analyzer coupled with mass spectrometry (TG-MS), allowing to track the mass loss and the evolution of many volatile species (CO, CO₂, CH₄, SO₂, H₂S, COS, HCl and H₂O). High heating rate (HHR) experiments were performed in an entrained flow reactor (drop-tube reactor – DTR), coupled with MS and nondispersive infrared sensor (NDIR). HHR experiments were complemented with CFD simulation of the multidimentional reacting flow field. A kinetic model of coal pyrolysis is employed to reproduce the experiments allowing a comprehensive assessment of the process. The suitability of this model is confirmed for LHR. The combination of HHR experiments with CFD simulations and kinetic modeling revealed the complexity of sulfur chemistry in coal combustion and allowed to better understand of the individual phenomena resulting in the formation of the different SO_X precursors. LHR and HHR operating conditions lead to different distribution of sulfur species released, highly-dependent on the gas-phase temperature and residence time. Higher retention of total sulfur in char is observed at LHR (63%) when compared to HHR (37–44%), at 1273 K. These data support the development of reliable models with improved predictability.     

Tritopic NHC Precursors: Unusual Nickel Reactivity and Ethylene Insertion into a C(sp3)–H Bond

The imidazolium chloride [C₃H₃N(C₃H₆NMe₂)N{C(Me)(=NDipp)}]Cl ( 1 ; Dipp=2,6‐diisopropyl phenyl), a potential precursor to a tritopic N^imineC^NHCN^amine pincer‐type ligand, reacted with [Ni(cod)₂] to give the Ni^I‐Ni^I complex 2 , which contains a rare cod‐derived η³‐allyl‐type bridging ligand. The implied intermediate formation of a nickel hydride through oxidative addition of the imidazolium C−H bond did not occur with the symmetrical imidazolium chloride [C₃H₃N₂{C(Me)(=NDipp)}₂]Cl ( 3 ). Instead, a Ni−C(sp³) bond was formed, leading to the neutral N^imineCHN^imine pincer‐type complex Ni[C₃H₃N₂{C(Me)(=NDipp)}₂]Cl ( 4 ). Theoretical studies showed that this highly unusual feature in nickel NHC chemistry is due to steric constraints induced by the N substituents, which prevent Ni−H bond formation. Remarkably, ethylene inserted into the C(sp³)−H bond of 4 without nickel hydride formation, thus suggesting new pathways for the alkylation of non‐activated C−H bonds.     

Thin film pyrolytic carbon electrodes: A new class of carbon electrode for electroanalytical sensing applications

This communication describes the electrochemical properties of thin pyrolytic carbon (PyC) films created using a reliable, non-catalytic chemical vapour deposition (CVD) process. After deposition, the electron transfer characteristics of the films are optimised using a simple oxygen plasma treatment. The redox probes Ru(NH₃)₆^3+/2+, Fe(CN)₆^3?/4? and Fe^3+/2+ are employed to demonstrate that the resulting material is endowed with a large electrochemical surface area and outstanding electron transfer properties. Atomic force microscopy (AFM), Raman and X-ray photoelectron spectroscopy (XPS) are used to elucidate the morphology and chemical composition of the electrode surfaces. This material represents a new class of carbon electrode, and its large densities of edge-plane sites and oxygenated functionalities make it an ideal candidate for electrochemical sensor applications.     

Thermal analysis of two types of dextran-coated magnetite

The thermal stability of two kinds of dextran-coated magnetite (dextran with molecular weight of 40,000 (Dex40) and 70,000 (Dex70)), obtained by dextran adsorption onto the magnetite surface is investigated in comparison with free dextran in air and argon atmosphere. The thermal behavior of the two free dextran types and corresponding coated magnetites is similar, but atmosphere dependent. The magnetite catalyzes the thermal decomposition of dextran, the adsorbed dextran displaying lower initial decomposition temperatures comparative with the free one in both working atmospheres. The dextran adsorbed onto the magnetite surface decomposes in air through a strong sharp exothermic process up to ~450 °C while in argon atmosphere two endothermic stages are identified, one in the temperature range 160–450 °C and the other at 530–800 °C.     

Adenine versus guanine quartets in aqueous solution: dispersion-corrected DFT study on the differences in π-stacking and hydrogen-bonding behavior

We have investigated the performance of the dispersion-corrected density functionals (BLYP-D, BP86-D and PBE-D) and the widely used B3LYP functional for describing the hydrogen bonds and the stacking interactions in DNA base dimers. For the gas-phase situation, the bonding energies have been compared to the best ab initio results available in the literature. All dispersion-corrected functionals reproduce well the ab initio results, whereas B3LYP fails completely for the stacked systems. The use of the proper functional leads us to find minima for the adenine quartets, which are energetically and structurally very different from the C_4h structures, and might explain why adenine has to be sandwiched between guanine quartets to form planar adenine quartets.     

Novel ‘Nano in Nano’ Composites for Sustained Drug Delivery: Biodegradable Nanoparticles Encapsulated into Nanofiber Non‐Wovens

Novel ‘nano in nano’ composites consisting of biodegradable polymer nanoparticles incorporated into polymer nanofibers may efficiently modulate drug delivery. This is shown here using a combination of model compound‐loaded biodegradable nanoparticles encapsulated in electrospun fibers. The dye coumarin 6 is used as model compound for a drug in order to simulate drug release from loaded poly(lactide‐co‐glycolide) nanoparticles. Dye release from the nanoparticles occurs immediately in aqueous solution. Dye‐loaded nanoparticles which are encapsulated by electrospun polymer nanofibers display a significantly retarded release.

     

Variation of the ultrafast fluorescence quenching in 2,6-sulfanyl-core-substituted naphthalenediimides by electron transfer

The ultrafast fluorescence quenching of 2,6-sulfanyl-core-substituted naphthalenediimides was investigated by transient spectroscopy. We find a strong dependence of the relaxation on the chemical structure of the substituent. Direct linking of an aryl rest to the sulfur atom leads to a strong red shift of the fluorescence in 1 ps and the disappearance of the emission in 5-7 ps depending on the polarity and viscosity of the solvent. This complex behavior is interpreted with the help of quantum chemical calculations. The calculations suggest that the initial relaxation corresponds to a planarization of the substituents and an associated partial electron transfer. This is followed by a twisting of the phenylsulfanyl substituents out of the molecular plane that allows a complete localization of the electron-donating orbital on the aryl group. Finally the back transfer happens in another 5-7 ps. For an additional methylene spacer group between the sulfur and the aryl, this sequence of relaxation steps is not possible and a simple exponential decay, slower by about 1 order of magnitude, is found.     

High-throughput isotherm determination and thermodynamic modeling of protein adsorption on mixed mode adsorbents

The thermodynamic modeling of protein adsorption on mixed-mode adsorbents functionalized with ligands carrying both hydrophobic and electrostatic groups was undertaken. The developed mixed mode isotherm was fitted with protein adsorption data obtained for five different proteins on four different mixed mode adsorbents by 96-well microtitre plate high throughput batch experiments on a robotic workstation. The developed mixed mode isotherm was capable of describing the adsorption isotherms of all five proteins (having widely different molecular masses and iso-electric points) on the four mixed mode adsorbents and over a wide range of salt concentrations and solution pH, and provided a unique set of physically meaningful parameters for each resin-protein-pH combination. The model could capture the typically observed minimum in mixed mode protein adsorption and predict the precise salt concentration at which this minimum occurs. The possibility of predicting the salt concentration at which minimum protein binding occurs presents new opportunities for designing better elution strategies in mixed mode protein chromatography. Salt-protein interactions were shown to have important consequences on mixed mode protein adsorption when they occur. Finally, the mixed mode isotherm also gave very good fit with literature data of BSA adsorption on a different mixed mode adsorbent not examined in this study. Hence, the mixed mode isotherm formalism presented in this study can be used with any mixed mode adsorbent having the hydrophobic and electrostatic functional groups. It also provides the basis for detailed modeling and optimization of mixed mode chromatographic separation of proteins.