Total Synthesis of cis‐Clavicipitic Acid from Asparagine via Ir‐Catalyzed CH bond Activation as a Key Step

4‐Substituted tryptophan derivatives and the total synthesis of cis‐clavicipitic acid were achieved in reactions in which Ir‐catalyzed C?H bond activation was a key step. The starting material for these reactions is asparagine, which is a cheap natural amino acid. The reductive amination step from the 4‐substituted tryptophan derivative gave cis‐clavicipitic acid with perfect diastereoselectivity.     

Organosulfide‐Catalyzed Diboration of Terminal Alkynes under Light

An efficient metal‐free diboration of terminal alkynes is reported. In the presence of a catalytic amount of organosulfides under light, the addition of bis(pinacolato)diboron (B₂pin₂) to terminal alkynes takes place efficiently to produce the corresponding double borylation products in good yields. Mechanistic studies indicate that this metal‐free sulfide‐catalyzed diboration of alkynes likely occurs by generation of a boryl‐centered radical with the aid of light and a sulfide, since such a radical was detected in the reaction mixture by electron spin resonance (ESR) spectroscopy. The present form of catalysis (sulfide/light) is thought to be unprecedented and provides a new means of preparation for organoboranes without heavy metal contamination in the products, which is highly desired in the preparation of drugs and electronic materials.     

Highly selective photoinduced perfluoroalkylation of vinylsilanes and its application to synthesis of water-shedding polysilanes

The functionalization of polysilanes is an important subject in materials science because functionalized polysilanes are expected to exhibit potentially innovative properties. This research aims at the addition of a water-shedding property to polysilanes by introducing perfluoroalkyl groups into their skeleton. The photoinduced iodoperfluoroalkylation of various vinylsilanes takes place successfully upon irradiation with a xenon lamp: vinylmonosilanes undergo iodoperfluoroalkylation with perfluoroalkyl iodides (R_fI) regioselectively, and the corresponding perfluoroalkylated silanes are obtained in moderate to high yields. Detailed optimization of the photoinduced iodoperfluoroalkylation has been investigated to apply this method to the functionalization of polysilanes. Polysilanes having vinyl groups can be synthesized by the reductive coupling of dichlorovinylsilanes with samarium diiodide (SmI₂) and samarium metal (Sm) upon irradiation with visible light. The synthesized vinylpolysilanes and R_fI (about 1.0 mM CHCl₃ solution) are coated on a glass plate sequentially, and then the following photoirradiation with light of a wavelength over 300 nm successfully adds an excellent water-shedding property to the glass plate.     

Determination of all stress components from measurements of the stress invariant by the thermoelastic stress method

A method for the resolution of all stress components from the first invariant J₁ measured by thermoelastic stress analyzer is described. This method may be used to determine, not only surface stress, but also internal stress and stress on the underside.The method is based on the following procedure:

1. (1) Pick an arbitrary domain Ω, within the structure, for which the stresses are required.

2. (2) Measure J₁ on the surface of Ω.

3. (3) Determine the optimum traction along the boundary Γ, which is a part of Ω, by the least squares method such that the difference between the measured J₁ and the calculated J₁ is at a minimum. Either FEM or BEM may be used for this calculation.

Examples of stress resolution for a two-dimensional stress concentration problem and a three-dimensional stress concentration problem are shown. The accuracy of the stress resolution is discussed.     

Response of an elastic Bingham fluid to oscillatory shear

The response of an elastic Bingham fluid to oscillatory strain has been modeled and compared with experiments on an oil-in-water emulsion. The newly developed model includes elastic solid deformation below the yield stress (or strain), and Newtonian flow above the yield stress. In sinusoidal oscillatory deformations at low strain amplitudes the stress response is sinusoidal and in phase with the strain. At large strain amplitudes, above the yield stress, the stress response is non-linear and is out of phase with strain because of the storage and release of elastic recoverable strain. In oscillatory deformation between parallel disks the non-uniform strain in the radial direction causes the location of the yield surface to move in-and-out during each oscillation. The radial location of the yield surface is calculated and the resulting torque on the stationary disk is determined. Torque waveforms are calculated for various strains and frequencies and compared to experiments on a model oil-in-water emulsion. Model parameters are evaluated independently: the elastic modulus of the emulsion is determined from data at low strains, the yield strain is determined from the phase shift between torque and strain, and the Bingham viscosity is determined from the frequency dependence of the torque at high strains. Using these parameters the torque waveforms are predicted quantitatively for all strains and frequencies. In accord with the model predictions the phase shift is found to depend on strain but to be independent of frequency.Notation A plate strain amplitude (parallel plates) - A _R plate strain amplitude at disk edge (parallel disks) - G elastic modulus - m torque (parallel disks) - M normalized torque (parallel disks) = 2m/R ³₀ - N ratio of viscous to elastic stresses (parallel plates) =µ A/ ₀ ratio of viscous to elastic stresses (parallel disks) =µ A _R/₀ - r normalized radial position (parallel disks) =r/R - r radial position (parallel disks) - R disk radius (parallel disks) - t normalized time = t — /2 - t time - _E elastic strain - _P plate strain (displacement of top plate or disk divided by distance between plates or disks) - _PR plate strain at disk edge (parallel disks) - ₀ yield strain - _E normalized elastic strain = _E/₀ - _P normalized plate strain = _P/₀ - _PR normalized plate strain at disk edge (parallel disks) = _PR/₀ - ₀ normalized plate strain amplitude (parallel plates) =A/ ₀ — normalized plate strain amplitude at disk edge (parallel disks) =A _R/₀ - phase shift between _P andT (parallel plates) — phase shift between _PR andM (parallel disks) - µ Bingham viscosity - stress - ₀ yield stress - T normalized stress =/ ₀ - frequency     

Swelling-shrinking behavior of chemically cross-linked polypeptide gels from poly(α-L-lysine), poly(α-DL-lysine), poly(ɛ-L-lysine) and thermally prepared poly(lysine): effects of pH, temperature and additives in the solution

We synthesized the glutaraldehyde cross-linked hydrogels using four kinds of poly(lysine)s (PLs) and measured the equilibrium swelling ratio (Q) as a function of pH. Also measured was the temperature change of Q at a fixed pH (11.6) in the absence and presence of additives (LiBr, methanol and urea) that affect the secondary structure of PLs. The swelling data were examined using a force balance approach in which the repulsive and attractive interactions among the cross-linked PL chains were considered based on the conformational properties of PLs in aqueous solutions. It was found that the formation of the helical segments in the cross-linked chain has little effect in the gel collapse, but their association acts as the attractive interaction causing the gel to shrink. The formation of the beta-sheet structure within the network also acts as the attractive interaction. These attractive interactions are mainly due to the hydrogen bonding, but hydrophobic interactions between the lysine side chains should be considered. In addition, in the swelling behavior of all the PL gels the polyampholyte nature appears due to electrostatic interactions of the basic groups with the C-terminal carboxyl group.     

Reorganization energy of supramolecular donor–acceptor dyad of octaethylporphyrin isomers and axial-coordinated acceptor: Experimental and computational study

The internal reorganization energy (λ_V) of photoinduced electron transfer (ET) in the supramolecular donor–acceptor dyads of 2,3,7,8,12,13,17,18-octaethylporphinatozinc(II) (ZnOEP) and electron acceptor ligands was compared with those of structural isomers, 2,3,7,8,11,12,17,18-octaethylhemiporphycenatozinc(II) (ZnHPc) and 2,3,6,7,12,13,16,17-octaethylporphycenatozinc(II) (ZnPcn). First, ET process of the supramolecular donor–acceptor dyads of ZnOEP was investigated by means of the transient absorption spectroscopy mainly. The formation of supramolecular dyads was confirmed by absorption spectral change, from which the association constant was estimated. The ET process was confirmed by the observation of radical cation of ZnOEP during the laser flash photolysis. The ET rates of these dyads are in the order of ZnOEP > ZnHPc > ZnPcn, when the driving forces for ET are similar to each other. From the free energy dependence of ET rates, the λ_V values of OEP and its isomers were estimated. The estimated λ_V value was in the order of ZnOEP < ZnHPc < ZnPcn. This tendency was reproduced by calculation at B3LYP/6-31G(d) and BHandHLYP/6-31G(d) levels. The origin of this tendency was discussed on the basis of the structural change during the ET process.     

Mg isotope fractionation in biogenic carbonates of deep-sea coral, benthic foraminifera, and hermatypic coral

High-precision Mg isotope measurements by multiple collector inductively coupled plasma mass spectrometry were applied for determinations of magnesium isotopic fractionation of biogenic calcium carbonates from seawater with a rapid Mg purification technique. The mean δ²⁶Mg values of scleractinian corals, giant clam, benthic foraminifera, and calcite deep-sea corals were −0.87‰, −2.57‰, −2.34‰, and −2.43‰, suggesting preferential precipitation of light Mg isotopes to produce carbonate skeleton in biomineralization. Mg isotope fractionation in deep-sea coral, which has high Mg calcite skeleton, showed a clear temperature (T) dependence from 2.5 °C to 19.5 °C: 1,000 × ln(α) = −2.63 (±0.076) + 0.0138 (±0.0051) × T(R ² = 0.82, p < 0.01). The δ²⁶Mg values of large benthic foraminifera, which are also composed of a high-Mg calcite skeleton, can be plotted on the same regression line as that for deep-sea coral. Since the precipitation rates of deep-sea coral and benthic foraminifera are several orders of magnitude different, the results suggest that kinetic isotope fractionation may not be a major controlling factor for high-Mg calcite. The Mg isotope fractionation factors and the slope of temperature dependence from deep-sea corals and benthic foraminifera are similar to that for an inorganically precipitated calcite speleothem. Taking into account element partitioning and the calcification rate of biogenic CaCO₃, the similarity among inorganic minerals, deep-sea corals, and benthic foraminiferas may indicate a strong mineralogical control on Mg isotope fractionation for high-Mg calcite. On the other hand, δ²⁶Mg in hermatypic corals composed of aragonite has been comparable with previous data on biogenic aragonite of coral, sclerosponges, and scaphopad, regardless of species differences of samples.     

Enantiocontrolled total syntheses of breviones A, B, and C

Enantiocontrolled total syntheses of the breviones A, B, and C have been accomplished using a highly diastereoselective oxidative coupling of an α-pyrone with a tricyclic diene prepared from an optically pure Wieland-Miescher ketone derivative through the 7-endo-trig mode of acyl radical cyclization.