Synthesis and properties of niobia films derived from niobium pentaethoxide

The hydrolysis of niobium pentaethoxide precursor in the presence of triethylamine (TEA) is discussed. Three precursors with TEA/Nb(OEt)₅ mole ratios of 0.25, 0.4 and 0.8 were prepared. Niobia colloids with different appearance were obtained after autoclaving the above precursors at 250°C during 12 h. The surface roughness and microstructure of niobia films prepared with the colloids by spread coating method are strongly dependent on the TEA/Nb(OEt)₅ mole ratio. At a value of 0.4 TEA/Nb(OEt)₅ mole ratio, a niobia film with large surface roughness can be achieved. It is opaque and mechanically stable and has differently ordered needle microstructure. The crystalline structure and photoelectrochemical property of niobia film with the largest surface roughness were examined. The effect of CO₂ gas bubbling, reflux and addition of 2-methoxyethanol on the hydrolysis of Nb(OEt)₅ and the nature of the Nb₂O₅ films is also discussed.     

Aromatization of methane over different Mo-supported catalysts in the absence of oxygen

Both acidity and structure of the support are important factors in converting methane to aromatics. Lower SiO₂/Al₂O₃ ratio seems to favor the aromatization of methane over the Mo/HZSM-5 catalyst. When Pt is added as a modifier the activity of Mo/HZSM-5 catalyst will decrease slightly, but coke formation will enhanced.     

以交联聚乙烯醇为载体的离子交换剂对蛋白质的分离性能

本文对阴离子交换剂ＤＥＡ—ＰＶＴ常压液相离子交换色谱分离蛋白质的性能、分离条件进行了探讨。结果表明其对蛋白质的分离性能良好，容易洗脱。与载体交联聚乙烯醇相比，ＤＥＡ—ＰＶＴ对蛋白质的非特异性吸附明显降低。     

BaCe1—xRExO3—0.5x的溶胶—凝胶法合成及离子导电性

用溶胶－凝胶法合成了系列钙钛矿结构的ＢａＣｅ１－ｘＲＥｘＯ３－０．５ｘ（ＲＥ＝Ｌａ，Ｎｄ，Ｓｍ，Ｅｕ，Ｇｄ，Ｄｙ，Ｈｏ，Ｅｒ和Ｙ）复合氧化物，通过ＸＲＤ和热分析对样品结构及生成过程进行了研究．测定了不同温度下样品的交流阻抗谱，讨论了稀土离子掺杂对ＢａＣｅＯ３电性质的影响．溶胶－凝胶法比固相反应法合成温度降低了６００～８００℃，稀土掺杂使ＢａＣｅＯ３离子导电率提高了１０～４０倍．     

Cover Picture: A Stepwise Annulation for the Transformation of Cyclic Ketones to Fused 6 and 7‐Membered Cyclic Enimines and Enones (Chin. J. Chem. 4/2019)

The cover picture shows a typical building within the Campus of Xiamen University displaying Chen Jiageng (Tan Kah Kee)'s style. Just like many beautiful buildings designed and constructed by human, Nature “designs and constructs” a huge number of useful molecules with fascinating structures called natural products. Many natural products possess a fused six or seven‐membered carbocyclic unity. On page 315–322, the Huang's group disclosed a three‐step “[2+n]” annulation method for the construction of fused six and seven‐membered carbocyclic enimines and enones. The method starts from simple cyclic ketones and terminal olefinic amides, and relies on both the Suzuki coupling reaction and the olefin‐amide based Friedel‐Crafts type acylating reaction, a method developed by Huang and coworkers.

     

Factors Influencing the Course of the Macrocyclization of α,ω‐Diamines with Esters of α,ω‐Dicarboxylic Acids

The efficient synthesis of eight new macrocyclic amides (lactams) via reaction of diesters with diamines under normal dilution conditions is described. The role of intermolecular H‐bond formation and steric hindrance is discussed based on ¹H‐ and ¹⁵N‐NMR studies of appropriate model compounds. Principles for the optimal choice of esters that can be efficiently transformed into diamides have been developed.     

Synthesis of saccharidic polymer colloids via free radical mini‐emulsion polymerization

Polymer colloids based on 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and butyl acrylate (BA) were prepared via free radical mini‐emulsion polymerization. The kinetic and colloidal features of the copolymerization were investigated. The final particle size (D) of the sugar latexes is inversely proportional to the concentration of the anionic emulsifier (sodium dodecyl sulphate, SDS) and the non‐ionic one (alkyl polyglucoside, APG). It was also found that D is independent of the concentration of either the water‐soluble initiator (potassium persulfate, KPS), or the oil‐soluble initiator (2,2′‐azobisisobutyronitrile, AIBN). The rate of mini‐emulsion polymerization is lower in comparison with the conventional emulsion polymerization under the same conditions. The polymerization rate (R_p) and the total number of particles (N_p) are proportional to the 0.72th and 0.93th power of the SDS, and to the 1.40th and 2.22th of the APG concentration. Following reaction orders, 0.79/0.06 were obtained for R_p/N_p versus the concentration of KPS, and 0.22/?0.01 for AIBN, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

微量元素锌与小儿健康状况分析

对98例西安阎良一四一医院儿科门诊就诊的小儿发锌进行了测定，分析了锌与小儿健康的关系，并对低锌的小儿进行了治疗。通过治疗(药疗、食疗)症状明显好转，复查发锌正常者达85．7％。     

Asymmetric dimers can be formed by dewetting half-shells of gold deposited on the surfaces of spherical oxide colloids

Asymmetric dimers consisting of gold microcrystals and spherical silica colloids have been fabricated by depositing thin films of gold onto the spherical colloids to form half-shells, followed by annealing at elevated temperatures. The capability and feasibility of this procedure have been demonstrated with silica and titania beads of 0.2-2 mum in diameter and gamma-Fe2O3/polystyrene@SiO2 core-shell particles 0.5 mum in size. The dimensions of gold microcrystals could be conveniently varied in the range of 100-650 nm by controlling the thickness of gold films and/or the diameter of the spherical colloids. This method provides another route to asymmetric dimers made of colloidal particles that could be different in size, chemical composition, surface functionality, density or sign of surface charge, bulk property, or a combination of these properties.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.