铜铟铝硒硫薄膜的低成本非真空混合法制备

采用溶剂热法制备出铜铟铝硒Cu(In,Al)Se₂ (CIASe)粉末,然后滴涂铜铟铝硒CIASe浆料获得前驱体薄膜,最后通过硒化/硫化过程制备出铜铟铝硒CIASe和铜铟铝硒硫CIASeS薄膜．通过XRD、SEM、XRF及光吸收等表征,发现所制备的薄膜为单相的黄铜矿结构,具有(112)择优取向．同时,在使用硫元素替代硒之后,薄膜的XRD主峰向高的2θ角度漂移,多孔薄膜也变得更加致密．薄膜带隙值也增加到更为合适的范围,从1.21 eV增加到1.33 eV,这也说明了硫化过程有利于提高CIASeS薄膜的质量．     

Decoupled two‐grid finite element method for the time‐dependent natural convection problem I: Spatial discretization

In this article, a decoupled two grid finite element method (FEM) is proposed and analyzed for the nonsteady natural convection problem using the coarse grid numerical solutions to decouple the nonlinear coupled terms, and the corresponding optimal error estimates are derived. Compared with the standard Galerkin FEM and the usual two‐grid FEM, our algorithm not only keeps good accuracy but also saves a lot of computational cost. Some numerical examples are provided to verify the performances of the decoupled two‐grid FEM. Both theoretical analysis and numerical experiments show the efficiency and effectiveness of the decoupled two‐grid FEM for the nonsteady natural convection problem. © 2015 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 2135–2168, 2015     

Improvement of resistive switching fluctuations by using one step lift‐off process

Bipolar resistive switching characteristics are investigated in ZrO₂ containing Cu thin layer devices, particularly for the self‐isolated‐structure device fabricated by one step lift‐off process. Compared with the traditional‐structure device, the self‐isolated‐structure device shows more uniform resistive switching characteristics. This is because the isolation of each device cell has negligible influence on each other and thus mitigates possible crosstalk between each cell. These results suggest that the feasibility of good stabilization of the resistive switching parameters can be obtained through one step lift‐off process. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Distributed Bragg reflector laser(1.8 μm) with 10 nm wavelength tuning range

We report a 1.8 μm two-section distributed Bragg reflector laser using butt-jointed In Ga As P bulk material as the waveguide core layer. The threshold current is 17 m A and the output power is 8 m W on average. The threshold current, output power, and emitting wavelength dependences on temperature are measured. The obtained wavelength tuning range is 10 nm. This device has potential applications in simultaneous multiple-gas detection.     

Direct Resolution of Enantiomers of DL-Amino Acids by Thin-Layer Chromatography with Vancomycin as Impregnating Agent

JPC – Journal of Planar Chromatography – Modern TLC -     

Synthesis of Site‐Specifically Phosphate‐Caged siRNAs and Evaluation of Their RNAi Activity and Stability

A complete set of new photolabile nucleoside phosphoramidites were synthesized, then site‐specifically incorporated into sense or antisense strands of siRNA for phosphate caging. Single caging modification was made along siRNA strands and their photomodulation of gene silencing were examined by using the firefly luciferase reporter gene. Several key phosphate positions were then identified. Furthermore, multiple caging modifications at these key positions led to significantly enhanced photomodulation of gene silencing activity, suggesting a synergistic effect. The caging group on both the terminally phosphate‐caged siRNA and the single‐stranded caged RNA has comparatively high stability, whereas hydrolysis of the caged group from the internally caged siRNA was observed, irrespective of the presence of Mg²⁺. Molecular dynamic simulations demonstrated that enhanced hydrolysis of the caging group on internally phosphate‐caged siRNAs was due to easy fragmentation of the caging group upon formation of the pentavalent intermediate of the phosphotriester with attack by water. The caging group in the terminally phosphate‐caged siRNA or single‐stranded caged RNA prefers to form π–π stacks with nearby nucleobases. In addition to providing explanations for previous observations, this study sheds further light on the design of caged oligonucleotides and indicates the direction of future development of nucleic acid drugs with phosphate modifications.     

Bright White‐Light Emission from a Single Organic Compound in the Solid State

White‐light‐emitting materials and devices have attracted enormous interest because of their great potential for various lighting applications. We herein describe the light‐emitting properties of a series of new difunctional organic molecules of remarkably simple structure consisting of two terminal 4‐pyridone push–pull subunits separated by a polymethylene chain. They were found to emit almost “pure” white light as a single organic compound in the solid state, as well as when incorporated in a polymer film. To the best of our knowledge, they are the simplest white‐light‐emitting organic molecules reported to date.     

Chemical Proteomic Profiling of Protein 4′-Phosphopantetheinylation in Mammalian Cells

Protein 4′-phosphopantetheinylation is an essential post-translational modification (PTM) in prokaryotes and eukaryotes. So far, only five protein substrates of this specific PTM have been discovered in mammalian cells. These proteins are known to perform important functions, including fatty acid biosynthesis and folate metabolism, as well as β-alanine activation. To explore existing and new substrates of 4′-phosphopantetheinylation in mammalian proteomes, we designed and synthesized a series of new pantetheine analogue probes, enabling effective metabolic labelling of 4′-phosphopantetheinylated proteins in HepG2 cells. In combination with a quantitative chemical proteomic platform, we enriched and identified all the currently known 4′-phosphopantetheinylated proteins with high confidence, and unambiguously determined their exact sites of modification. More encouragingly, we discovered, using targeted chemical proteomics, a potential 4′-phosphopantetheinylation site in the protein of mitochondrial dehydrogenase/reductase SDR family member 2 (DHRS2).     

ZIF-67 derived carbon wrapped discontinuous CoxP nanotube as anode material in high-performance Li-ion battery

Transition metal phosphides (TMPs) are prospective anode materials for lithium-ion batteries (LIBs) due to their high theoretical capacities and low redox voltages. Herein, we report a template directing method to develop a tube-sheath hybrid composing of cobalt phosphide particles encapsulated in metal organic frameworks (MOFs) derived N-doped carbon sheaths (Co_xP@NC). The utilization of directing template leads to a homogenous distribution of the subsequently formed cobalt phosphide particles, restrains the aggregation of cobalt phosphides, and thus results in the superb rate capability and cyclability. Contributable to the integrated merits of the interior downsized cobalt phosphide particles and the outer ZIF-67 derived porous carbon sheath, the volume expansion during cycling is effectively suppressed. The Co_xP@NC hybrid shows superb electrochemical performance as anode material for LIB, with good reversible capacity of 928 mAh·g^?1 after 100 cycles at 0.1 A g^?1, and high stability of 526 mAh·g^?1 after 600 cycles at 1.0 A g^?1. This work provides a route for rational design of MOF derived carbon-based anode material for LIB, which could also be applied as a promising platform in diverse field.     

Investigation on the structure,fluoride vaporization and crystallization behavior of CaF2–CaO–Al2O3–(SiO2) slag for electroslag remelting

Journal of Thermal Analysis and Calorimetry - The structure, vaporization behavior and crystallization of CaF2–CaO–Al2O3 slags with different SiO2 contents for electroslag remelting...