The important role of Mn in the room-temperature ferromagnetism of Mn-doped GaN films

Mn-doped GaN films (Ga_1−xMn_xN) were grown on sapphire (0 0 0 1) using Laser assisted Molecular Beam Epitaxy (LMBE). High-quality nanocrystalline Ga_1−xMn_xN films with different Mn concentration were then obtained by thermal annealing treatment for 30 min in the ammonia atmosphere. Mn ions were incorporated into the wurtzite structure of the host lattice by substituting the Ga sites with Mn³⁺ due to the thermal treatment. Mn³⁺, which is confirmed by XPS analysis, is believed to be the decisive factor in the origin of room-temperature ferromagnetism. The better room-temperature ferromagnetism is given with the higher Mn³⁺ concentration. The bound magnetic polarons (BMP) theory can be used to prove our room-temperature ferromagnetic properties. The film with the maximum concentration of Mn³⁺ presents strongest ferromagnetic signal at annealing temperature 950 °C. Higher annealing temperature (such as 1150 °C) is not proper because of the second phase Mn_xGa_y formation.     

Magnetic characterization of dual phase FeZrB soft magnetic alloy

The magnetic properties and the annealing process of Fe₇₈Zr₇B₁₅ amorphous ribbons are investigated by X-ray diffraction (XRD), differential scanning calorimetry, and vibrating sample magnetometer. The fully amorphous structure of the as-quenched ribbons is confirmed by the XRD pattern. The Curie temperature and the saturation magnetization M_s of the ribbons are 305 °C and 124.3 emu/g, respectively. Annealing at 550 °C can result in an increase in M_s with annealing time due to the increasing crystallized volume fraction of α-Fe phase. The optimized annealing process is established at 550 °C for 20-30 min with maximum M_s of 146.6 emu/g. The morphology of the ribbons annealed at 550 °C is observed by scanning electron microscopy, showing that nanocrystalline α-Fe grains are dispersed in an amorphous matrix.     

Disorder structure of free-flow and global jams in the extended BML model

The original BML model is extended by introducing extended sites, which can hold several vehicles at each time-step. Unexpectedly, the flow in the extended model sharply transits from free-flow to global jams, but the transition is not one-order in original BML model. And congestion in the extended model appears more easily. This can ascribe to the mixture of vehicles from different directions in one site, leading to the drop-off of the capacity of the site. Furthermore, the typical configuration of free flowing and global jams in the extended models is disorder, different from the regular structure in the original model.     

Theoretical investigation of encapsulation processes of C60 into single-wall carbon nanotubes

The encapsulation of C₆₀ into single-wall carbon nanotubes is systematically studied by tight-binding molecular dynamics method with an appropriate long-range Lennard-Jones potentials. For a (16,0) nanotube, it is impossible to encapsulate C₆₀ into the tube because of a much larger energy barrier with the relaxation of the open end.     

Double dark resonances and the dispersion properties in a four-level inverted-Y atomic system

The electromagnetically induced transparency (EIT) and its dispersion properties in a four-level inverted-Y atomic system are investigated. The absorption spectrum of a weak probe field shows two EIT windows (dark resonances) whose location, width, and depth can be controlled by manipulating the parameters of the coupling fields; the corresponding dispersion properties are also measured by using a Mach-Zehnder interferometer. The experimental measurements agree well with the theoretical calculations. This kind of system can find important applications in two-channel quantum communication and information storage.     

Effects of a novel ultrasound contrast agent with long persistence on right ventricular pressure: Comparison with SonoVue

This work investigated the effect of infusion of a self-made ultrasound contrast agent with long persistence (named ZHIFUXIAN) on rat right ventricular pressure and made a preliminary evaluation on the relative safety of the novel microbubbles. Normal saline, SonoVue and ZHIFUXIAN were injected through caudal vein at the total volume of 0.5 ml for each injection. The right ventricular systolic pressure (RVSP) and end-diastolic pressure (RVEDP) were monitored and the changes of the pressure were compared with baseline readings. RVSP increased when saline, SonoVue or ZHIFUXIAN were injected, the greatest change being after SonoVue (about 2 mm Hg), but there was no statistical significance compared with baseline (P > 0.05). There was no significant difference in RVSP between saline, SonoVue and ZHIFUXIAN at any time point. Also, there was no significant difference in RVEDP between groups at each time point and between different time points in each group. The results indicate that the self-made microbubbles effect on right ventricular hemodynamics is equivalent to that of normal saline at the same volume needed for effective enhanced imaging, demonstrating that it does not produce changes in right ventricular blood pressure under the study conditions. Pathological examination also showed it had no obvious influence on lung, liver and kidney.     

Effect of stearic acid, zinc stearate coating on the properties of synthetic hydromagnesite

Synthetic hydromagnesite (SHM), used as flame retardant for polymers, may have similar or better flame retardancy effectiveness than aluminum tri-hydroxide (ATH) and magnesium di-hydroxide (MDH). Suitable surface modifiers are often employed to improve its dispersion and compatibility with polymer matrix. In this study, we chose stearic acid (SA) and zinc stearate (ZS) as the surface modifier, and investigated the properties of SHM modified with various surface modifier content using dry blending coating process. Scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry (TG), particle size distribution, contact angle, oil absorption, bulk density, tapped density and Carr's index were employed to characterize the effect of surface modification. The results showed that the surface of SHM powders was changed from hydrophilic to lipophilic. The flowability of the surface modified powder was also improved. TG graphs showed that the surface modifier had no obvious influence on the degradation pathway of the SHM.     

Physical mechanism of silicon ablation with long nanosecond laser pulses at 1064 nm through time-resolved observation

Nanosecond (ns) laser ablation can provide a competitive solution for silicon micromachining in many applications. However, most of the previous studies focus on ns lasers at visible or ultraviolet (UV) wavelengths. The research is very limited for ns lasers at infrared (e.g., 1064 nm) wavelengths (which often have the advantage of much lower cost per unit average output power), and the research is even less if the ns laser also has a long pulse duration on the order of ∼100 ns. In this paper, time-resolved observation using an ICCD (intensified charge-coupled device) camera has been performed to understand the physical mechanism of silicon ablation by 200-ns and 1064-nm laser pulses. This kind of work has been rarely reported in the literature. The research shows that for the studied conditions, material removal in laser silicon ablation is realized through surface vaporization followed by liquid ejection that occurs at a delay time of around 200-300 ns. The propagation speed is on the order of ∼1000 m/s for laser-induced plasma (ionized vapor) front, while it is on the order of ∼100 m/s or smaller for the front of ejected liquid. It has also been found that the liquid ejection is very unlikely due to phase explosion, and its exact underlying physical mechanism requires further investigations.     

Fluorescence Spectroscopy of Protein Oligomerization in Membranes

Fluorescence spectroscopy is one of the most powerful tools for characterization of a multitude of biological processes. Of these, the phenomenon of protein oligomerization attracts especial interest due to its crucial role in the formation of fibrillar protein aggregates (amyloid fibrils) involved in ethiology of so-called protein misfolding diseases. It is becoming increasingly substantiated that protein fibrillization in vivo can be initiated and modulated at membrane-water interface. All steps of membrane-assisted fibrillogenesis, viz., protein adsorption onto lipid bilayer, structural transition of polypeptide chain into a highly aggregation-prone partially folded conformation, assembly of oligomeric nucleus from membrane-bound monomeric species and fiber elongation can be monitored with a mighty family of fluorescence-based techniques. Furthermore, the mechanisms behind cytotoxicity of prefibrillar protein oligomers are highly amenable to fluorescence analysis. The applications of fluorescence spectroscopy to monitoring protein oligomerization in a membrane environment are exemplified and some problems encountered in such kinds of studies are highlighted.     

Synthesis of uniform quasi-octahedral CeO<Subscript>2</Subscript> mesocrystals via a surfactant-free route

A facile surfactant-free nonaqueous method is presented to prepare uniform quasi-octahedral ceria, CeO₂, mesocrystals, in which only Ce(NO₃)₃ and octanol were used as the reactants at a reaction temperature of 150 °C. CeO₂ sample synthesized using this technique consists of well-dispersed quasi-octahedrons and exhibits an uniform size and morphology. Based on structural characterization, it is proposed that the CeO₂ mesostructure was formed by self-assembly of primary nanocrystals based on unique 3D oriented-attachment mechanism. Optical characterization exhibited a strong quantum confinement, revealing small size of primary nanocrystals. The thermal stability and UV–Vis study reveal CeO₂ mesocrystal has various potential for high temperature applications and optical apparatus applications.