最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。     

Ising自旋体系的非平衡动态相变

在平均场理论架构下, 以含时金兹堡-朗道和Glauber动力学这两类动态模型为基础，研究 了受外场和温度共同驱动的Ising自旋体系的非平衡动态相变.确定了界定动态无序(动态顺 磁相P)和动态有序(动态铁磁相F)转变的动态相界.并根据动态序参量Q和Binder参数U随系统 温度t(r₀)、驱动外场频率ω和振幅h₀的变化规律，就上述两类模 型的动态相界上是否存在区分连续动态转变和非连续动态转变的三临界点这一引发争议的问 题做出了进一步分析说明. 关键词： Ising自旋体系 非平衡动态相变 含时金兹堡-朗道模型 Glauber 动力学模型     

在SQUID心磁测量中基于奇异值分解和自适应滤波的噪声消除法

采用矩阵奇异值分解(singular value decomposition, SVD)的方法，对高温射频超导量子干涉仪(HTc rf-SQUID)采集到的单通道心磁信号进行处理.证明了对于近似周期性的心磁信号，在无参考噪声的情况下矩阵奇异值分解的方法与自适应窄带陷波相结合有较好的消除广谱噪声的效果. 关键词： 高温射频超导量子干涉仪 心磁信号 奇异值分解 噪声消除     

橙皮素A的NMR研究

橙皮素A是从中药北沙参(Glehnia littoralis Fr. Schmidt ex Miquel)的正丁醇萃 取物中分离得到的一种8-O-4′-型异木脂素苷类化合物. 通过化学方法和波谱分析鉴 定了该 化合物的结构. 采用2D NMR技术对其NMR信号进行了全归属. DMSO-d₆代替CD₃OD作为溶剂，并利用重水交换，能准确读出偶合常数J_7,8值.      

腺嘌呤及其β-环糊精包结物的光谱研究

通过紫外光谱的摩尔比法确定了腺嘌呤与β-环糊精（β－CD）包结物的包结比为1：1，通过紫外光谱和荧光光谱研究了腺嘌呤在酸性，中性，及碱性条件下的光谱变化及与β－CD包结物的光谱变化，分别求得了它们与β－CD包结的平衡常数。     

S—R分解定理的唯一性,存在性和客观性

对于连续体的一切物理可能的变形场，其变形梯度张量F可被分解为一个对称张量S和一个正交张量R的直和，这便是S-R分解定理．本文通过矩阵方法和张量方法证明了S-R分解定理的唯一性、存在性和客观性．     

Fabrication of quantum dots on the InSb (110) surface

Using a scanning tunneling microscope, quantum dots with diameters of order 25 Å have been fabricated on the cleaved InSb (110) surface in UHV. Both In and Sb atoms were clearly resolved on the cleaved surface.     

ASYMPTOTIC BEHAVIOR OF SOLUTIONS OF NONLINEAR NEUTRAL DIFFERENTIAL EQUATION

The boundedness of the every solution and the asymptotic behavior of all solutions of the nonlinear neutral delay differential equation [x(t) - P(t)x(t - t)]' Q1 (t)f(x{t-σ1))-Q2(t)f(x(t -σ2))=0,t≥t0 are investigated, whereτ,σ1,σ2∈(0,∞), P∈C([t0,∞),R), and Q1,Q2∈C([t0,∞),R), f∈C(R,R). The sufficient conditions obtained improve the existing results in the literatures.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.