Formation of Interfacial Layers in LaAlO3/Silicon during Film Deposition

We have studied the interracial reactions between amorphous LaAlO3 thin films and Si substrates, using high- resolution transmission electron microscopy and x-ray photoelectron spectroscopy. It has been shown that the interracial layer between LaAlO3 film and Si substrate chemical states show that the ratio of La 4d3/2 to Al 2p is SiLaxAlyOz. The depth distributions of La, Si and Al of the interfacial layer remains unchanged with the depth compared to that of the LaAlO3 film. Moreover, the Si content, in the interracial layer gradually decreases with increasing thickness of the interracial layer. These results strongly suggest that the Al element is not deficient in the interracial layer, as previously believed, and the formation of a SiLaxAlyOz interracial layer is mainly due to the diffusion of Si from the substrate during the LaAlO3 film deposition. With the understanding of the interracial layer formation, ones can control the interface characteristics to ensure the desired performances of devices using high-k oxides as gate dielectrics.     

Positive solutions and eigenvalue regions of two-delay singular systems with a twin parameter

The paper is concerned with a two-delay singular differential system with a twin parameter. Applying fixed-point index theory, we show the relationship between the asymptotic behaviors of nonlinearities (at zero and infinity) and the open regions (eigenvalue regions) of parameters, which are correlated with delays, such that the system has zero, one and two positive solution(s).     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

System dependence of the correlation function of IMFs in Ar + Sn at 35 MeV/u

The inclusive reduced velocity correlation functions of the intermediate mass fragments were measured in the reactions of ³⁶Ar + ^112,124Sn at 35 MeV/u. The anti-correlation is observed to be stronger in ³⁶Ar + ¹²⁴Sn system than that in ³⁶Ar + ¹¹²Sn. The difference of the correlation functions between the two reactions is mainly contributed by the particle pairs with high momenta. A three body Coulomb repulsive trajectory model is employed to calculate the emission time scale of the IMFs for the two systems. The time scale is 150 fm/c in ³⁶Ar + ¹¹²Sn and 120 fm/c in the ³⁶Ar + ¹²⁴Sn, respectively.     

Mixed Elastico-Plasticity Problems with Partially Unknown Boundaries

In this paper,we study mixed elastico-plasticity problems in which part of the boundary is known,while the other part of the boundary is unknown and is a free boundary.Under certain conditions,this problemcan be transformed into a Riemann-Hilbert boundary value problem for analytic functions and a mixed boundaryvalue problem for complex equations.Using the theory of generalized analytic functions,the solvability of theproblem is discussed.     

The energy and structure of (0 0 1) twist grain boundary in noble metals

The relaxed energy and structure of (0 0 1) twist grain boundary (GB) in noble metals Au, Ag and Cu are simulated by the MAEAM. In-boundary translation between two adjacent grains results in a periodic energy variation and the period is a square with the side length L_Σ/Σ. The lowest energy appears when the two grains are translated relatively to either corner or center of the periodic square. The relaxed GB energy increases smoothly for low-angle boundaries and levels off for larger-angle boundaries except a cusp appeared at θ = 36.87° (Σ = 5). After relaxation, the symmetry of the GB structure is not changed but the displacement of the atoms parallel to the GB plane decreases with increasing the distance of the atoms from the GB plane.     

ALICE实验中光子谱仪的触发选判机制的模拟研究

对ALICE实验光子谱仪的触发选判机制进行了模拟研究, 内容包括: 1) 对光子谱仪的能量重建性能进行了研究, 通过计算机模拟检验光子谱仪探测器对大横动量范围的入射粒子的能量重建性能; 2) 对光子谱仪探测器的事件触发效率进行了研究, 通过计算机模拟分析触发阈值的选取并计算触发效率; 3) 对光子谱仪探测器的事件触发频率进行了研究, 通过计算机模拟对p-p和Pb-Pb两种碰撞模式下的触发频率分别进行了估算和讨论.     

Representation surfaces of Young''s modulus and Poisson''s ratio for BCC transition metals

 The general expressions for the compliance , Young's modulus E(h k l) and Poisson's ratio υ(h k l) along an arbitrary direction [h k l] are given for cubic crystals. The representation surfaces, for which the length of the radius vector in the [h k l] direction equals to E(h k l) or υ(h k l), are constructed for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic, both representation surfaces of Young's modulus and Poisson's ratio are spherical surfaces. The remaining BCC transition metals may be grouped into two classes. In the first group (Cr, Mo, Nb and V) with negative values of s_A, Young's modulus surface has eight depressed corners and six rounded protuberances at the centers of the faces. In the second group (Fe and Ta) with positive values of s_A, on the contrary, Young's modulus surface has eight rounded protuberance corners and six depressions at the centers of the faces. The contrary conclusions are obtained for Poisson's ratio.     

A non-fused fiber coupler for side-pumping of double-clad fiber lasers

A non-fused fiber coupler is demonstrated for side-pumping of the double-clad fiber (DCF) lasers by adhesive techniques. The fiber coupler is fabricated by adhering an angularly polished single-clad fiber (SCF) to the inner cladding of the DCF. The pumping light is launched from the SCF by total inner reflection. Coupling coefficient as a function of coupling angle, bend distance, and backward scattering is investigated. The field distribution in DCF is also discussed.     

改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。