热处理过程中聚酯长丝的形态变化

在自制的红外三因素处理机上~[1],用红外加热在定张力下对聚对苯二甲酸乙二酯(PET)成品长丝进行热处理(二次定型)。用X-光衍射(WAXS)、X-光小角散射(DAXS)、红外光谱(IR)和双折射方法,测定样品的热收缩、结晶度、晶粒尺寸和取向、非晶取向、长周期和链折叠带强度。所得形态参数的变化表明,处理温度在200℃以上时,张力不再阻碍链折叠。不同定张力样品的形态研究表明,存在阻碍链折叠的某个张力转折值。本文条件下,这个张力值为f_(critical)=0.066g/dtex 。张力大于此值,链折叠过程受阻。     

An Efficient Method for the Synthesis of Acyl-diazenes Using NaNO_2/NaHSO_4·H_2O

Azo compounds are widely utilized as analytic reagents and dyes1, they can also be used in material of non-linear optics, material of optics information storing in laser disks, and dyes with oil solubility in photochromy in modern technology2. Recently, many noteworthy studies have shown that some azo compounds possess excellent optical memory and photoelectric properties3,4. For example, polymer scaffolds bearing azobenzene-potential are useful for optical information storage, azo-dye doped…     

Molecular Recognition of Bridged Bis(β-cyclodextrin)s Linked by Phenylenediseleno Tether on the Primary or Secondary Side with Fluorescent Dyes

A Novel β-cyclodextrin dimer,2,2′-o-phenylenediseleno-bridgedbis(β-cyclodextrin)(2),has been synthesized by reaction ofmono-[2-O-(p-tolylsulfonyl)]-β-cyclodextrin and poly(o-phenylenediselenide).The complexation stability constants(K_s)and Gibbs free energy changes(-ΔG°)of dimer 2 with fourfluorescence dyes,that is,ammonium 8-anilino-1-naphthalene-sulfonate(ANS),sodium 6-(p-toluidino)-2-naphthalenesul-fonate(TNS),Acridine Red(AR)and Rhodamine B(RhB)have been determined in aqueous phosphate buffer solution(pH=7.2,0.1 mol·L~(-1)at 25℃ by means of fluorescence spec-     

Synthesis, Structure and Conductivity of the New Charge-transfer Salt (ET)_2(CH_2=CH-CH_2-SO_3)·H_2O

ET is one of the most famous electron-donor molecules, which forms charge-transfer complexes (abbr. CT-complexes) with various types of counterions. These complexes have received intense attention because a wide range of physical properties such as conductivity and superconductivity1, ferromagnetism2-4 and nonlinear optical properties5 was found in these materials. Although the majority of the ET-based CT-complexes were prepared by combining with inorganic counterions, CT-complexes with o…     

Synthesis, Structure and Characterization of [Cu(2,2'-bpy)2][{Cu(2,2'-bpy)2}2W12O40(H2)]·4H2O

An organic-inorganic compound [Cu(2,2'-bpy)2][{Cu(2,2'-bpy)2}2W12O4o(H2)]·4H2O (Mr = 4048.00) was prepared from the hydrothermal reaction of Na2WO4·2H2O, CuCl2·2H2O,2,2'-bipyridine (2,2'-bpy) and H2O at 160 ℃ for 4 days. The compound crystallizes in the monoclinic system, space group P21/n with a = 18.9196(8), b = 20.4212(8), c = 21.8129(9)(A), β=96.992(3)°, V= 8365.0(6) (A)3, Dc= 3.214 g/cm3, Z = 4,μ(MoKα) = 17.269 mm-1 and F(000) = 7324.Of the 119837 total reflections, 17315 were unique (Rint = 0.0489). The final R = 0.0385 and wR =0.0770 for 11142 observed reflections with I ＞ 2σ(I). Single-crystal X-ray diffraction reveals that the structure is composed of [{Cu(2,2'-bpy)2}2W12O40(H2)]2- anions, discrete [Cu(2,2'-bpy)2]2 cations and lattice water molecules, and the anion is made up of a {W12O40(H2)}6- α-Keggin core decorated with two {Cu(2,2'-bpy)2}2 groups through bridging oxygen atoms.     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

高能闪光照相中影响光程确定的几个因素

 利用闪光照相基本原理和成像原理，在直接记录法和转换屏记录法的情况下，研究了闪光照相中影响X射线在材料中光程确定的主要因素。结果表明，影响光程确定的几个因素是：散射效应、光源角分布效应、立体角效应和能谱效应。对于高能闪光照相，散射效应是影响光程确定的最主要因素，散射的存在使光程的测量值比实际值降低20%～40%。因此必须在做CT之前，对散射的影响进行修正。     

一种利用窗口结构提取红外弱小目标的方法

在分析红外弱小目标检测的检测概率和虚警率的基础上,引入了一种基于窗口结构的红外弱小目标检测方法.该方法无需进行图像差分,利用局部小范围内目标相对背景的灰度变化检测目标,可以在较低信噪比的情况下获得较高的检测概率和较低的虚警率.实验表明了该方法的有效性.     

粉末压片-X荧光光谱法测定过磷酸钙中硫含量

硫是过磷酸钙中重要营养指标之一,为准确快速测定过磷酸钙中硫的含量,试验采用粉末压片-X荧光光谱法,将过磷酸钙试样充分干燥后研磨至粒度小于74 μm,采用硼酸镶边,在压力18 Mpa条件下保压30 s,制成样片。通过在过磷酸钙样品中添加不同质量的纯物质硫酸钙（质量分数范围1.52 %～17.21 %）,经过专用混匀设备混合均匀后,与试样压片相同条件下压制标准样片,作为过磷酸钙中硫的标准样品,建立硫标准曲线,曲线线性相关系数R2为0.9995,采用经验系数法校正干扰,建立了粉末压片-波长色散X射线荧光光谱法测定过磷酸钙中硫含量的方法, 方法检出限为0.002 %。对3个不同硫含量的过磷酸钙样品采用本实验方法重复测量7次,RSD在1.4 %~3.1 %,方法精密度性好,同时用高温燃烧红外光谱法和电感耦合等离子发射光谱法对比,三者测量结果相对极差小于2.0 %,测量结果无显著性差异。此方法不需要对样品进行熔融或溶解,样品制备简单,数据准确度和稳定性好,分析效率高,适合大批量样品中硫的测定。     

蝙蝠喉部发声组织建模及发声机理*

建立蝙蝠发声组织模型对超声机理研究及在智能设备的应用具有重要意义。根据蝙蝠喉部发声组织结构特点,通过有限元方法构建了蝙蝠的3种不同发声组织模型,分析了尺寸、材料力学参数、组织结构和张力4个因素对发声组织特征频率的影响。结果表明,如果用人类声带,按比例缩小构建蝙蝠喉部组织模型,蝙蝠无法发出超声波。构建组织结构含甲状软骨和声带的半鼓状模型和只含声带的条状模型,两种模型的特征频率相近且在合理的参数域内均无法达到超声范围。而含膜条状模型的特征频率可以通过张力进行超声频率的调节,这与文献的实验结果一致。因此,可基于含膜条状模型对蝙蝠喉管发声组织进行建模及其发声机理研究。