The Hall effect in an electrically conducting fluid for variable magnetic field and high magnetic Reynolds numbers

Hall phenomena in an electrically conducting fluid with a variable magnetic field were considered in [1]. In that paper the basic characteristics of the above-mentioned phenomena are determined, with certain unimportant constraints, for the case of fluid motion along a channel of rectangular cross section in a traveling magnetic field. The magnetic Reynolds number was assumed to be small, and a solution was given for the induction field in the form of a series in powers of the indicated parameter. Quantitative estimates based on the data of [1] are impossible in the case of relatively high electrical conductivity of the fluid, although certain conclusions of a qualitative nature remain valid. There is thus reason to consider the case of high magnetic Reynolds numbers. This will also allow a fuller picture of the characteristic Hall effect phenomena to be constructed for a variable magnetic field.     

Heat transfer measurements and correlations for air–water flow of different flow patterns in a horizontal pipe

Heat transfer coefficients were measured and new correlations were developed for two-phase, two-component (air and water) heat transfer in a horizontal pipe for different flow patterns. Flow patterns were observed in a transparent circular pipe using an air–water mixture. Visual identification of the flow patterns was supplemented with photographic data, and the results were plotted on the flow regime map proposed by Taitel and Dukler and agreed quite well with each other. A two-phase heat transfer experimental setup was built for this study and a total of 150 two-phase heat transfer data with different flow patterns were obtained under a uniform wall heat flux boundary condition. For these data, the superficial Reynolds number ranged from 640 to 35,500 for the liquid and from 540 to 21,200 for the gas. Our previously developed robust two-phase heat transfer correlation for a vertical pipe with modified constants predicted the horizontal pipe air–water heat transfer experimental data with very good accuracy. Overall the proposed correlations predicted the data with a mean deviation of 1.0% and an rms deviation of 12%.     

Diffraction theory of optical interference moiré and a device for production of variable virtual reference gratings: A moiré microscope

Optical interference moiré methods are analyzed using Fraunhoffer diffraction theory to relate general large surface deformations to the fringes observed. This analysis determines the Almansl strain in the current configuration from the gradients of the fringe number function. The analysis shows the advantages of an experimental scheme that allows the virtual reference grating to be varied. The ability to vary the virtual reference grating results in a larger dynamic range and the ability to maintain a fringe spacing for maximum accuracy. A moiré microscope has been constructed which has this ability. Digital image processing coupled with optical filtering and phase control is used to enhance the accuracy of the fringe measurements. The variable virtual-reference-grating capability is demonstrated by using it to highlight several aspects of the deformation field near a crack tip in a single crystal of iron-silicon.     

Estimating deflection of a simple beam model using fiber optic bragg-grating sensors

In this paper, we develop a method to estimate the bridge deflection using fiber optic Bragg-grating (FBG) strain sensors. For most structural evaluation of bridge integrity, it is very important to measure the geometric profile, which is a major factor representing the global behavior of civil structures, especially bridges. In the past, because of the lack of appropriate methods to measure the deflection curve of bridges on site, the measurement of deflection has been restricted to just a few discrete points along the bridge, and the measuring points have been limited to the locations installed with displacement transducers. However, by applying classical beam theory, a formula is rearranged to estimate the continuously deflected profile by using strains measured directly from several points. In addition, FBG strain sensors, which are electromagnetic, noise-free and multipoint measurable, are employed to obtain flexural strains more accurately and stably. The regression analysis is performed to obtain a strain function from the measured strain data. Finally, the deflection curve can be estimated by applying the strain function to the formula. An experimental test has also been carried out to verify the developed method.     

Thermal analysis of the roll in the strip casting process

Coiled strip can be directly produced through the twin-roll strip casting process from the melt by incorporating casting and hot rolling together into a single step. In this unique process, the strip formation from the molten metal critically relies upon the casting rolls. Thus, the design of the rolls is extremely essential. The coupled heat transfer and deformation analysis of the casting roll is carried out in a two-dimensional numerical model, using a finite element program (MARC) to examine the thermal stress and displacement. The effects of several factors such as the nickel overlay thickness on the roll surface, the casting speed, and the roll diameter on thermal characteristics are investigated.     

Fatigue crack growth behavior of Al7050-T7451 attachment lugs under flight spectrum variation

This paper discusses an analytical and experimental investigations of the fatigue crack growth behavior in attachment lugs subjected to a randomized flight-by-flight spectrum. In the analysis, the stress intensity factors for through-the-thickness cracks initiating from lug holes were compared by weight function method, boundary element method (BEM), the interpolation of Brussat’s solution. The stress intensity factors of a corner crack at a transition region were obtained using two parameter weight function method and correction factors. Fatigue life under a load spectrum was predicted using stress intensity factors and Willenborg retardation model considering the effects of a tensile overload. Experiments were performed under a load spectrum and compared with the fatigue life prediction using the stress intensity factors by different methods. Changes of fatigue life and aspect ratio according to the clipping level of the spectrum were discussed through experiment and prediction. Effect of the spectrum clipping level on the fatigue life was experimentally evaluated by using beach marks of fractured surface.     

Instability of a layer op lightly ionized plasma in crossed electric and magnetic fields

In a lightly ionized plasma, charged-particle drift due to collisions with neutral atoms occurs at different velocities: $$\begin{array}{*{20}c} {v_{Ea} = \mp \frac{{b_a E}}{{1 + (\omega _a \tau _a )^2 }},v_{ \bot a} = \frac{{b_a E(\omega _a \tau _a )}}{{1 + (\omega _a \tau _a )^2 }}} \\ {\left( {b_a = \frac{{|e|\tau _a }}{{m_a }},\omega _a = \frac{{|e|\tau _a }}{{m_a }}} \right),} \\ \end{array} $$ where b_a is the mobility of particles of the type a;ω_a is the Larmor frequency; the upper sign refers to electrons and the lower sign to ions. A difference in the charged-particle drift velocities can cause instability of an inhomogeneous lightly ionized plasma. Let us consider the following example. Assume that in the initial state of the plasma there is a concentration gradient along the x-axis, that the external electric field is directed along the x-axis, and that the magnetic field coincides with the z-axis. In this system, under the influence of a Lorentz force the charged particles will move in a direction opposite to the y-axis. Since electrons have a higher velocity than ions, an electric field is induced in this direction. This electric field, together with the magnetic field, causes particle drift in the negative direction of the x-axis. Consequently, if the concentration gradient in the initial state is directed opposite to the x-axis this state cannot be stable. Instability of this kind has been examined by Simon [1]. On the basis of studies by Kadomtsev and Nedospasov [2], as well as by Rosenbluth and Longmire [3], Simon developed a theory of instability of a lightly ionized plasma in crossed fields with an inhomogeneous density distribution in the direction of the external electric field. Somewhat later, Simon's theory was developed [4]. In devices with inhomogeneous plasma flow in which the plasma (conducting) layers alternate with nonconducting layers, the external electric field and concentration are normal to one another. We shall bear this case in mind below and shall examine the instability of a lightly ionized plasma in crossed fields when the concentration inhomogeneity is in a direction perpendicular to the external electric field.     

Axisymmetric impingement of a hot jet on a flat plate: equilibrium flow analysis of high-temperature air

The flow structure of an underexpanded supersonic jet with high reservoir temperature impinging on a flat plate has been numerically investigated using a Total Variation Diminishing (TVD) scheme. When the temperature of the flow field is high enough to cause chemical reaction, the specific heat ratio,, is no longer equal to 1.4, nor constant. This explains the difference found in the literature between the flow properties of the calorically perfect gas and that of the chemically reacting flow. Under the equilibrium flow assumption the effect of high temperature gas on the impinging jet has been taken into account in the present paper by using specific heat ratio and speed of sound given by correlation polynomials of thermodynamic variables. The limiting case of cold jet calculation in the present numerical results agreed well with the existing experimental data. For the equilibrium jet with high reservoir temperature,T _o=1000K, qualitative support of the present result has been provided by means of the approximation theory.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.