Clinical usefulness of a trypsin radioimmunoassay kit

From the clinical use of RIA-gnost trypsin kit, the following results were obtained. 1. Standard curve showed a steep and good curve was shown. 2. Incubation: The condition for the first incubation was set at the room temperature for 10-24 hours and that for the second incubation at the room temperature for 3-5 hours. With these settings, satisfactory results were obtained. 3. Reproducibility and recovery: The C.V. of the reproducibility and the recovery were considered superior, and the values were below 10% and +/- 3%, respectively. 4. Correlation between trypsin and serum elestase-1: An excellent positive correlation (coefficient of correlation r = 0.889) was shown. 5. Serum trypsin concentration of normal and pancreatic diseases: The normal range was from 100 to 500 ng/ml. Acute pancreatitis rose obviously. Diabetes mellitus and chronic pancreatitis was below 500 ng/ml and the pancreatic cancer showed a tendency to scatter in the range of 50-1,250 ng/ml. The above results indicated that serum trypsin can be easily measured with high precision by using this method. Thus the method is considered useful for the diagnosis of pancreatic diseases.     

Optimization of matrix-assisted laser desorption/ionization time-of-flight collision-induced dissociation using poly(ethylene glycol)

Details of the optimization of the collision-induced dissociation (CID) process, using a collision cell on a matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometer, are described using poly(ethylene glycol) 1000 (PEG 1000) as a model analyte. The effects of collision gas identity (helium, air, and argon), as well as collision gas pressure, on the resulting MS/MS data were investigated. With PEG 1000, helium was found to give the best results with respect to signal-to-noise (S/N) ratio. The optimum pressure for each gas was found to be in the range where the precursor ion signal was attenuated to approximately 30-50% for helium and 40-60% for argon. The effect of cation choice (Li, Na, and K) on the CID of PEG was also studied. CID spectra were produced for each, but PEG cationized with lithium was found to produce the spectra with the highest S/N ratio. The MALDI-TOF CID spectra that were generated for PEG were compared with the high-energy and low-energy MS/MS spectra obtained from a sector mass spectrometer and from a triple quadrupole mass spectrometer, respectively. The results observed for PEG confirm that CID on a MALDI-TOF mass spectrometer is a high-energy MS/MS technique.     

First asymmetric total synthesis of (+)-steganacin determination of absolute stereochemistry

(+)-Steganacin was synthesized in a new and highly specific asymmetric pathway based on the novel application of chiral γ-lactone as a chiral synthon. By this synthesis the absolute stereochemistry of natural (?)-steganacin could be determined in unequivocal way.     

Polymerization of methacrylates. I. Polymerization reactivity of picryl methacrylate

The polymerization of picryl (PMA), 2,4-dinitrophenyl (2,4-DNMA),2,6-dinitrophenyl (2,6-DNMA), 2-methyl-4,6-dinitrophenyl (MDNMA), and 2,6-dimethylphenyl methacrylates (DMMA) was carried out in benzene at 60°C. PMA, 2,6-DNMA, and MDNMA did not undergo radical homopolymerization, while 2,4-DNMA and DMMA did. The results suggest that the growing radical readily attacks the oxygen atom of the nitro group at the 2 position of the terminal phenyl group due to the steric effect of the substituent at the 6 position, resulting in chain termination. PMA formed a charge-transfer complex with 2-naphthyl methacrylate (NMA). The stoichiometric composition of this complex was shown to be 1:1 molar complex. PMA was readily copolymerized with NMA. The amount of solvent affected the composition of the copolymer obtained at a given same mole fraction in feed. The results suggest that charge-transfer interaction between the ester groups affects the copolymerization mechanism.     

An atropisomeric M2L4 cage mixture displaying guest-induced convergence and strong guest emission in water

Introduction of atropisomeric axes into a bent bispyridine ligand leads to the quantitative formation of a complex mixture of atropisomeric M₂L₄ cages upon treatment with metal ions. Whereas the isomer ratio of the obtained cage mixture, consisting of up to 42 isomers, is insensitive to temperature and solvent, the quantitative convergence from the mixture to a single isomer is accomplished upon encapsulation of a large spherical guest, namely fullerene C₆₀. The observed isomerization with other guests depends largely on their size and shape (e.g., <10 and 82% convergence with planar triphenylene and bowl-shaped corannulene guests, respectively). Besides the unusual guest-induced convergence, the present cage mixture displays the strongest guest emission (Φ_F = 68%) among previously reported M_nL_m cages and capsules, upon encapsulation of a BODIPY dye in water.

A complex mixture of atropisomeric M₂L₄ cages is shown to undergo perfect convergence to a single isomer upon encapsulation of spherical C₆₀ in water. Moreover, the cage mixture displays very strong guest emission upon encapsulation of a BODIPY dye.     

Detection of bilayer packing stress and its release in lamellar-cubic phase transition by time-resolved fluorescence anisotropy

An introduction of nonlamellar-forming lipids into planar bilayers generates packing stress, which is important for the biological functions of plasma membranes and is a driving force for the lamellar-nonlamellar phase transition. We have investigated the phase behavior of a binary system consisting of egg yolk phosphatidylcholine and monoolein (MO) and the changes in the local orientation order of lipids in a lamellar-bicontinuous cubic phase transition. Small-angle X-ray scattering has revealed that the lamellar-bicontinuous cubic phase transition occurs at an MO molar fraction (X(MO)) between 0.6 and 0.7. These phases were dispersed to form liposomes and cubosomes to monitor the anisotropy of the incorporated fluorescence probe, in which Pluronic F127, used as a dispersion stabilizer of the cubic phase, has been proven not to alter the cubic structure and the location of the probes. Time-resolved fluorescence anisotropy measurements on these dispersions have revealed that the order parameter of the probe in the lamellar phase increases with increasing X(MO), and that it decreases during the transition to the cubic phase. This observation suggests that packing stress generated by the addition of the nonlamellar-forming lipid is released by the phase transition.     

A novel synthesis of 2,3‐dihydro‐1H‐thieno[3,4‐b]pyrroles via ring transformation of cyclic sulfonium ylides by titanium(IV) chloride‐triethylamine system

A series of cyclic sulfonium ylides 4a‐h reacted with titanium( IV ) chloride in the presence of triethyl‐amine to give the corresponding fused 2,3‐dihydro‐1H‐thieno[3,4‐b]pyrroles 5a‐h , via a ring opening and recyclization. In contrast, treatment of compounds 4a, 4b, 4e and 4f with titanium(IV) chloride, triethy‐lamine and dimethylamine hydrochloride gave the corresponding thiophenes 6a, 6b, 6e and 6f . Furthermore, compounds 6a and 6b easily underwent cyclization with sodium hydride to afford the corresponding 5a and 5b .     

A new synthetic pathway of segmented tri-block copolyether

A new synthetic pathway of A–B–A tri-block copolyether which is composed of a hydrophilic poly(oxyethylene) unit as an A part and a hydrophobic poly(oxy-2-methyl-trimethylene) unit as a B part is proposed. Telechelic α-tosyl-ω-tosyloxypoly(oxy-2-methyl-trimethylene) derived from tosylation of poly(oxy-2-methyl-trimethylene glycol) (PMTG) was allowed to react with poly(ethylene glycol) (PEG) in the presence of sodium hydroxide. T_g of the resulting A–B–A tri-block copolyether (PEMG) (M?_n = 1600) was ?72°C and its specific gravity [D₄¹⁵] was 1.055.     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

Theoretical study of the thermal interconversion mechanism between the norbornadiene and quadricyclane radical cations

Geometry optimizations at the UHF/6-31G^* and UMP2/6-31G^* levels of theory were performed to find the transition state in the interconversion between norbornadiene (N) and quadricyclane (Q) radical cations. Two transition structures, TS^+·₁ and TS^+·₂, were obtained which have C₁ and C₂ symmetry, respectively. Vibrational analysis at the UHF and UMP2 levels of theory and IRC calculation showed that TS^+·₁ is the true transition state connecting N^+· and Q^+·, while TS^+·₂ is a second order saddle point.