Measurements of LET-distribution, dose equivalent and quality factor with the RRMD-III on the Space Shuttle Missions STS-84, -89 and -91

Dosimetric measurements on the Space Shuttle Missions STS-84, -89 and -91 have been made by the real-time radiation monitoring device III (RRMD-III). Simultaneously, another dosimetry measurement was made by the Dosimetry Telescope (DOSTEL) on STS-84 and by the tissue-equivalent proportional counter (TEPC) on STS-91. First, the RRMD-III instrument is described in detail and its results summarized. Then, the results of DOSTEL and TEPC are compared with those of the RRMD-III. Also, the absorbed doses obtained by TLD (Mg2SiO4) and by RRMD-III on board STS-84 and -91 are compared.     

Development of a new triphase catalyst and its application to the epoxidation of allylic alcohols

[see reaction]. A new triphase catalyst has been developed. When an aqueous solution of H3PW12O40 (1) was added to a solution of the amphiphilic chain copolymer 2, a new self-assembled and macroporous complex 3 was formed. This complex was effective as a catalyst in the epoxidation of allylic alcohols. Even in the use of 2.7 x 10(-5) mole equiv of the catalyst, the epoxidation with aqueous H2O2 proceeded without organic solvents to give the corresponding epoxy alcohols in high yields.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.     

Quantitative comparison of a corona-charged aerosol detector and an evaporative light-scattering detector for the analysis of a synthetic polymer by supercritical fluid chromatography

A corona-charged aerosol detector (CAD) was developed to improve the sensitivity, reproducibility and quantitativeness of detection as compared to evaporative light-scattering detector (ELSD) for liquid chromatography. Our laboratory used the corona CAD as a detector for supercritical fluid chromatography (SFC) and evaluated its performance compared to the ELSD by using a certified reference material of poly(ethylene glycol) (PEG) and a well-defined equimass mixture of uniform PEG oligomers. The corona CAD was able to detect a 10 times more dilute solution of uniform oligomers compared to the ELSD. Although the original data of molecular mass by ELSD was 4.6% smaller than the certified value of PEG 1000, molecular mass distribution obtained by corona CAD was virtually almost the same as the certified value without any calibrations.     

Grid-based energy density analysis: implementation and assessment

Grid-based energy density analysis (grid-EDA) that decomposes the total energy into atomic energies by a space-partitioning function is proposed. The kinetic energy, nuclear attraction, and exchange-correlation functional are evaluated on grid points and are split into atomic contributions. To reduce numerical errors in the conventional scheme of numerical integration, the electronic Coulomb and HF exchange interactions are evaluated by the pseudospectral method, which was first applied to an ab initio method by Friesner [Chem. Phys. Lett. 116, 39 (1985)], and are decomposed into atomic contributions. Grid-EDA using the pseudospectral method succeeds in ensuring less than 1 kcalmol error in total energies for small molecules and providing reliable atomic energy contributions for the problematic lithium cluster, which exhibits a strong basis-set dependence for Mulliken-type EDA. Also, site-dependent atomization energies are estimated by grid-EDA for cluster models such as Li(48), C(41)H(60), and Mg(32)O(32). Grid-EDA reveals that these models imitate crystal environments reasonably because atomization energies estimated from the inner atoms of the models are close to the experimental cohesive energies.     

Efficient and stereoselective synthesis of the disaccharide fragment of incednine

Efficient and stereoselective synthesis of a disaccharide fragment, 2-deoxy-4-O-(N'-monodemethyl-D-forosaminyl)-2-methylamino-β-D-xylopyranoside, of a novel antibiotic, incednine (1), is described. The key β-stereoselective formation of a 2,3,4,6-tetradeoxy-4-methylamino glycoside bond was achieved by remote participation-assisted glycosylation.     

Efficient synthesis of [¹¹C]ramelteon as a positron emission tomography probe for imaging melatonin receptors involved in circadian rhythms

Ramelteon (TAK-375) is a novel melatonin receptor agonist that is used for clinical treatment of insomnia. The present report describes radiolabeling of ramelteon with the short-lived positron-emitter 11C (T(1/2)=20.4 min) by 2 methods. One method was [11C]methylation of an acetoamide precursor and the other was [11C]acylation of the corresponding amine precursor. First, [11C]methylation method showed the low reproducibility together with the production of many kinds of side products from which the [11C-methyl]Ramelteon was separated with chemical purity of <28% and radiochemical purity of >98%. Whereas, the [11C]acylation method showed high efficiency and reproducibility with a good radiochemical yield (22-43%, decay corrected), high chemical and radiochemical purities (>99% each), and high specific activity (43-162 GBq/μmol) (n=5) after HPLC purification. [11C]Ramelteon is a potential positron emission tomography (PET) probe for imaging the melatonin receptor.     

Solvation and dynamic behavior of cyclodextrins in dimethyl sulfoxide solution

High-frequency dielectric relaxation behavior up to 20 GHz was investigated for plain (alpha, beta, gamma) and (62 and 100%) methylated cyclodextrins, CDs, in dimethyl sulfoxide, DMSO, solution. Each hydrogen atom of OH groups of the CDs solvated a DMSO molecule for a residence time of 130-180 ps due to the hydrogen bond formation to an oxygen atom of DMSO, and a few DMSO molecules were included in cavities of the CDs for a while similar to the residence time. The overall rotational relaxation modes of solvated CDs were also observed depending on the effective sizes of the solvated CDs.     

Steady surface modification of polydimethylsiloxane microchannel and its application in simultaneous analysis of homocysteine and glutathione in human serum

A novel polydimethylsiloxane (PDMS) surface modification method for microchip electrophoresis has been developed to make a stable and sufficient electroosmotic flow (EOF). Poly(l-glutamic acid) (PGA) which had ionizable carboxyl groups at a high pH-range was immobilized on the surface of microchannel fabricated with PDMS. The surface modification involved surface oxidation by plasma, the silanization of 3-aminopropyldimethylethoxysilane (APDMES) and immobilization of PGA via amide bond. The modified channel was extremely stable against consecutive electric power supply over 5h, and its long-term stability was demonstrated by the efficient separation of four amino acid derivatives reproducibly after a week. Additionally, homocysteine (Hcy), important risk factor of cardiovascular disease, osteoporosis and problems in pregnancy, was successfully measured in human serum in modified PDMS channel with the other thio amino acid simultaneously.     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.