The lipophilicity of the series of alpha-(4-phenylpiperazin-1-yl)-gamma-phthalimido-butyramides (1-8) has been investigated. Several methods, like reversed-phase thin-layer chromatography and high-performance liquid chromatography using reversed-phase RP18 and IAM.DD2 columns, were applied to determine RMO, log k0 and log k(0IAM) factors. The RP-TLC investigations were performed in mixtures of acetone-water and acetonitrile-water. For RP-HPLC method mixtures of acetonitrile, water and 0.01% TFA were used as the mobile phases while for IAM.DD2 investigations mixtures of acetonitrile and water were applied. The partition coefficients of compounds (1-8) were also calculated with the Pallas and CAChe programs. All the obtained data, both from experimental methods and computational calculations, were compared and a suitable conclusion was reached. 相似文献
Contact angle measurements on poly(tetrafluoroethylene) (PTFE) surface were carried out for the systems containing ternary mixtures of cetyltrimethylammonium bromide (CTAB) and p-(1,1,3,3-tetramethylbutyl)phenoxypoly(ethylene glycols), Triton X-100 (TX100) and Triton X-165 (TX165). The aqueous solution of ternary surfactant mixtures were prepared by adding the third surfactant to the binary mixture of the surfactants where the synergetic effect in the reduction of the surface tension of water was determined, to compare the influence of the third surfactants on the values of surface tension of this binary mixture and the values of the contact angle on PTFE. The obtained results and calculations indicate that the ternary mixtures of CTAB + TX165 (αCTAB = 0.2, γLV = 60 and 50 mN/m) + TX100 (C = 10−8 to 10−2 M) have the biggest efficiency of the reduction of contact angle of water on PTFE in comparison to aqueous solutions of the single surfactants and their binary and ternary mixtures. Also in the case of all studied ternary mixtures of surfactants at concentrations of the bulk phase corresponding to unsaturated monolayer at water-air interface the adsorption of surfactants at PTFE-water interface is different than that at water-air interface, but is the same at concentrations near the critical micelle concentration (CMC). Thus the linear dependences between γLV cos θ − γLV and cos θ − 1/γLV, in the range of concentration studied for all systems confirm the same adsorption at two interfaces only at C near the CMC. 相似文献
The oscillatory oxidation of thiocyanate ions with hydrogen peroxide, catalyzed by Cu2+ ions in alkaline media, was so far observed as occurring simultaneously in the entire space of the batch or flow reactor. We performed this reaction for the first time in the thin-layer reactor and observed the spatiotemporal course of the above process, in the presence of luminol as the chemiluminescent indicator. A series of luminescent patterns periodically starting from the random reaction center and spreading throughout the entire solution layer was reported. For a batch-stirred system, the bursts of luminescence were found to correlate with the steep decreases of the oscillating Pt electrode potential. These novel results open possibilities for further experimental and theoretical investigations of those spatiotemporal patterns, including studies of the mechanism of this chemically complex process. 相似文献
Nickel-ruthenium alloys with various compositions have been deposited by electrodeposition for the first time. Cyclic voltammetry and linear stripping voltammetry measurements show that codeposition of nickel with ruthenium is possible below the potential value of nickel reduction. High-quality alloys containing nickel and ruthenium can be plated at cathodic potentials ranging from − 0.5 to − 1.0 V vs SCE. Deposited coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The diffractograms obtained show that an increase of nickel concentration in alloy will lead to a change in the phase composition and formation of NiRu (100) and (101) phases which is observed to be 78 mas.% Ni. SEM studies confirm the surface homogeneity and presence of small, regular grains. AFM observation allows the estimation of the real surface area of obtained alloys which increase with more negative electrodeposition potentials. Ni-Ru alloys were found to be highly electroactive in the water splitting process, which can be connected with the presence of the NiRu phase and a well-developed electroactive area.
A novel method for direct laser writing of two-dimensional cadmium sulfide (CdS) semiconductor nanoparticle microstructures
is reported. A two photon or a higher-order multiphoton absorption process, originating from femtosecond laser pulses, was
used to decompose CdS precursors dispersed in a zirconia thin film previously dip-coated on a glass substrate. The kinetics
of nanoparticle formation as a function of laser power were monitored in situ by photoluminescence spectroscopy. Raman spectroscopy
was also performed to characterize the structural changes of the zirconia matrix under irradiation and to verify the formation
of CdS nanoparticles. Results show that CdS nanoparticles were formed by two-photon absorption (TPA) with or without the help
of an additional carbazole photoinitiator. 相似文献
Lipophilicity is a very important property of chemical compound taking into consideration in drugs design. Relationships between biological activity, among others lipophilicity, and chemical structure (QSAR) of the compound are very often used by researches. Especially important is the kind of substituents connected to the basic structural fragment and how it changes the lipophilicity of the compound. The aim of this study was to determine the parameters of lipophilicity of quinobenzothiazine derivatives using reversed phase - thin-layer chromatography (RP-TLC), which would enable one to determine the structure–activity relationship. The objective of our work is a series of 15 newly synthetized quinobenzothiazines. They were analyzed by thin-layer chromatography (TLC) with the use of two different mobile phases consisting of methanol or acetone as organic modifiers. For all compounds investigated, the values of lipophilicity obtained from computational method were also determined. Cluster analysis was carried out too for all data of lipophilicity obtained. Low correlation was found between values of experimental lipophilicity and lipophilicity from computational methods for newly synthetized compounds. 相似文献
A micro extraction – spectrophotometric procedure is developed for the determination of bismuth in pharmaceutical formulations.
The procedure is based on the extraction of tetraiodobismuthate(III) ion paired with benzyltributylammonium cation into chloroform.
The application of Nile Blue as internal standard (IS) enabled good analytical performance for micro-scale analysis. The ratio
between the absorbances measured at 491 nm (bismuth complex) and at 632 nm (IS) was taken as the analytical signal. The procedure
was carried out in Eppendorf tubes, lowering significantly the use of reagents and the volume of organic solvent. In the calibration
range up to 60 mgċl−1, the linear regression coefficient was 0.9999, the CV for 15 mgċl−1 and for 50 mgċl−1 Bi were 1.6% and 0.7% respectively. The results obtained in the analysis of pharmaceutical formulations were in good agreement
with the results of EDTA titration method.
Received November 25, 1999. Revision February 14, 2000. 相似文献
A series of novel aza-BODIPY dyes substituted with p-(dimethylamino)phenyl groups were synthesized and their spectral and electrochemical properties were compared. In particular, the impact of p-(Me2N)Ph- groups on these characteristics was of consideration. For two aza-BODIPYs studied, a near-IR absorption band was observed at circa λabs=796 nm. Due to the pronounced intramolecular charge transfer (ICT) exerted by the presence of strongly electron-donating p-(Me2N)Ph- substituents, the compounds studied were weakly emissive with the singlet lifetimes (τS) in the picosecond range. Nanosecond laser photolysis experiments of the brominated aza-BODIPYs revealed T1→Tn absorption spanning from ca. 350 nm to ca. 550 nm with the triplet lifetimes (τT) ranged between 6.0 μs and 8.5 μs. The optical properties of the aza-BODIPYs studied were pH-sensitive. Upon protonation of the dimethylamino groups with trifluoroacetic acid in toluene, a stepwise disappearance of the NIR absorption band at λabs=790 nm was observed with the concomitant appearance of a blue-shifted absorption band at λabs=652 nm, which was accompanied by a prominent emission band at λfl=680 nm. The transformation from a non-emissive to an emissive compound is associated with the inhibition of the ICT. As estimated by CV/DPV measurements, all aza-BODIPYs studied exhibited two irreversible oxidation and two quasi-reversible reduction processes. All compounds studied exhibit extremely high photostability and thermal stability. 相似文献
A composite of CaTi0.9Fe0.1O3 and electrolyte material, i.e. magnesium doped La0.98Mg0.02NbO4 was prepared and studied. The phase content and the sample microstructure was examined by an X-ray diffraction method and scanning electron microscopy. EDS measurements were done both for composite samples and the diffusion couple. The electrical properties were studied by four terminal DC method. The high-temperature interaction between the two components of the composite has been observed. It has been suggested that lanthanum diffused into the perovskite phase and substituted for calcium whereas calcium and niobium formed the Ca2Nb2O7 pyrochlore phase. At 1500°C very large crystallites of the pyrochlore were observed. Regardless of strong interaction between the composite components, its total conductivity was weakly dependent on the sintering temperature. 相似文献