茜素红与蛋白质分子Langmuir吸附聚集反应研究

在pH4.3的B-R缓冲体系中,用微相吸附-光谱修正技术[1]研究了茜素红(ARS)与牛血清白蛋白(BSA)、人血清白蛋白(HSA)的结合反应。其吸附结合常数分别为:KBSA-ARS=3.950×104,KHSA-ARS=4.377×104。染料与蛋白的最大结合数分别为NARS∶NBSA=9∶1,NARS∶NHSA=7∶1。经光谱修正技术计算结合产物的实际摩尔吸光系数分别为εBSA-ARS(537nm)=2.517×104L.mol-1.cm-1,εHSA-ARS(519nm)=2.051×104L.mol-1.cm-1,检出限BSA为19mg/L,HSA为23mg/L。经探讨该结合反应机理符合Langmuir吸附聚集反应方程。     

交联壳聚糖在痕量钨(Ⅵ)分析中的应用

提出了用交联壳聚糖（CCTS）预富集、分光光度法测定痕量钨的新方法。研究了CCTS对钨（Ⅵ）的吸附行为，结果表明：在pH=4.5的条件下，交联壳聚糖对钨（Ⅵ）的吸附率最大，可达96％。考察了吸附时间、吸附剂用量、样品体积以及共存元素对吸附率的影响，探讨了吸附机理。方法的检出限（3σ）为0．65μg/L，相对标准偏差（RSD）小于0．75％（n=6),富集倍数为20倍。用于温泉水和海水中痕量钨的测定，结果满意。     

Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn（CH3COO）2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.     

室温快速合成Ag基金属有机骨架材料用于电催化还原CO2

选择具有强给电子能力的1,2,4-三唑为配体,成功合成了银基金属有机骨架材料(Ag-MOF)并用于电催化还原CO₂反应(CO₂RR)。借助粉末X射线衍射、透射电子显微镜、扫描电子显微镜、计时电流法等表征手段对材料的晶体结构、形貌和电催化CO₂RR性能进行了系统的研究。与商品化的纳米Ag颗粒对比,Ag-MOF展现出更优异的电催化CO₂RR产物选择性、催化活性和稳定性,在-0.9 V (vs RHE)时,CO的法拉第效率高达96.1%。当电压为-1.1 V (vs RHE)时,电流密度可达17 mA·cm^-2,且电极可以稳定运行300 min。这说明通过选择合适的配体结构,可以改变催化位点周围的化学环境,从而高效将CO₂转化为目标产物。     

新型4,6-脱水-α-D-吡喃型半乳糖衍生物的合成

以甲基-2,3,4,6-四-O-苄基-α-D-吡喃型半乳糖为起始原料,通过对1-位和2-位进行结构修饰,6-位选择性脱除苄基后,再引入保护基Ms(或Ts)制得3,4-二-O-苄基-6-磺酰基(或对甲苯基磺酰基)-α-D-吡喃型半乳糖衍生物(2a~2f);在AcOK/DMSO体系中于80℃反应24 h,2发生分子内亲核取代反应合成了一系列新型的4,6-脱水-α-D-吡喃型半乳糖衍生物,产率78%~88%,其结构经1H NMR,13C NMR和ESI-HR-MS表征。     

ICP-AES法测定茶叶中As,Cd,Ni,Pb等元素的含量

目的对样品前处理、酸度及茶叶中共存元素干扰的影响等因素进行探讨,方法用微波消解前处理样品,ICP-AES法同时测定茶叶中铅(Pb)、砷(As)、镉(Cd)、镍(Ni)等元素含量。结果该法的回收率在84.5%～115%之间,精密度RSD均小于9%,结论该法能满足茶叶测定要求。     

In vivo Toxicity Evaluation of a Nano-drug Delivery System Using a Caenorhabditis elegansModel System

Drug carrier materials need to possess good biological safety. Presently, most biosafety evaluation studies use rodent animal models, including rats and rabbits. However, the cost of raising these animals is relatively high and the experimental period is long. Caenorhabditis elegans(C. elegans) presents an ideal toxicological evaluation model due to its simple structure, easy cultivation, short life cycle, and evolutionary conservation. In this paper, we used C. elegans to test the biological safety of our pH-responsive carrier system(FFPFF self-assembling into a nanosphere structure, FFPFF Nps), which was designed for anti-tumor drug delivery. Our results showed that exposure to high doses of FFPFF Nps did not have a significant impact on the survival rate, growth, development, movement, and reproduction of C. elegans. The preliminary evaluation of the overall biological model of C. elegans shows that FFPFF Nps has good biological safety and warrants further study.     

油茶果壳活性炭的制备及其对Cr(Ⅵ)的去除

利用磷酸活化法制备油茶果壳活性炭,并将其作为吸附剂用于去除水溶液中的Cr(Ⅵ),同时探讨了不同参数(Cr(Ⅵ)的初始浓度、吸附剂的用量、pH、温度等)对油茶果壳活性炭吸附Cr(Ⅵ)的影响。结果表明:当温度为293 K,Cr(Ⅵ)初始浓度为250 mg/L,pH为2.0时,Cr(Ⅵ)的最大吸附量可达165.0 mg/L。根据吸附动力学原理,发现其吸附过程遵循拟二级动力学模型。Cr(Ⅵ)的去除程度随Cr(Ⅵ)初始浓度的升高而增加,且其平衡数据与Freundlich模型拟合良好。     

大孔Mo-Ni/Al_2O_3催化剂的催化裂化柴油加氢性能研究

采用三次纳米自组装合成法,制备了一种以二次纳米自组装Al2O3为主体的大孔主客体催化剂FA-40,具有0.78 cm3·g-1的孔容、114 m2·g-1的比表面积、27 nm的平均孔径、6.0 nm和40 nm的双峰孔结构、孔分布在10~100 nm高度集中、低堆积密度为0.56 g·cm-3、活性金属含量高达35.70%。XRD和TEM分析结果显示,活性金属以直径小于2 nm的微晶态纳米粒子形式均匀分散于主体表面。采用劣质催化裂化柴油进行20 h加氢实验评价,反应趋于稳定时,FA-40的脱硫、脱氮及芳烃饱和率分别达到94.4%、95.5%和67.9%,与F-5相比分别提高了20%、80%和140%。300 h的长周期加氢实验表明,FA-40具有良好的加氢性能。