Enhanced electrodeposition of indium hexacyanoferrate thin films through improved plating solution stability

An ordinary plating solution for indium hexacyanoferrate (InHCF) thin film deposition, mainly composed of equal concentrations of In³⁺ and [Fe(CN)₆]^3–, usually forms precipitates rapidly when either concentration is higher than few millimolar. This contributes to the plating solution's instability. Moreover, electrodeposited capacities are limited accordingly. In this work, the plating solution's stability and the electrodeposition of InHCF were greatly enhanced by adding a large amount of K⁺ and/or H⁺. It was found that a 10-mM plating solution added with 1 M HCl and 1 M KCl could be stored as fresh over a one-week period, whereas an unmodified plating solution became useless within a couple of minutes. Also, such cationic additions, especially adding H⁺, increased the electrodeposited capacity ca. 18 times at least, as compared with that obtained from the unmodified plating solution. Furthermore, related enhancing mechanisms were proposed and verified. To sum up, this study offers a means for better InHCF electrodeposition and should promote the applications of InHCF films. Electronic Publication     

Substituted γ-lactones. Some observations on the synthesis and reactivity of 4-aroyl-3-hydroxy-2(5H)-furanones

The reaction pathway towards formation of 4-aroyl-3-hydroxy-2(5H)-furanones 1 from the base catalyzed reaction between an acetophenone, diethyl oxalate and formaldehyde was investigated. If methoxide was used as base, a transesterification was found to occur in the first step, while a side reaction, namely the retro Claisen reaction, was in competition with the desired lactone formation in the second step. The nature of the solvent and the acidic character of 1 as well as the basicity of the aminoarylene were found to have a profound influence on the course of the reaction of 1 with aminoarylenes.     

Use of SPE—TLC for Quality Control of Rhodiola rosea Extracts

SPE and TLC have been used for qualitative and quantitative analysis of salidroside, rosavin, rosarin, and rosin in commercially available dry extracts from Rhodiola rosea roots. The best separation of all the compounds was achieved on silica gel TLC plates with ethyl acetate—methanol—water, 77 + 13 + 10 (v/v), as mobile phase. UV detection was performed at λ = 215 nm for salidroside and at λ= 245 nm for the rosavins (rosavin, rosarin, and rosin). Detection limits for salidroside and the rosavins were 90 ng and 60 ng per spot, respectively. Results from quantitative analysis confirmed the manufacturer’s declaration of the amounts of salidroside and the rosavins in the extracts.

     

A simple and general method for the synthesis of multicomponent Na2V6O16.3H2O single-crystal nanobelts

Multicomponent Na2V6O16.3H2O (barnesite) single-crystalline nanobelts were synthesized by a direct reaction-crystallization growth of bulk V2O5 and NaF powders under hydrothermal treatment without using any templates or catalysts. This new strategy could be extended to prepare other one-dimensional multicomponent nanomaterials including ammonium, alkali-metal or alkali-earth metal vanadium oxide bronzes and other transition metal oxyfluorides. This is an efficient and mild solution method with clear advantages over the traditional high-temperature approach for the large-scale production of 1D multicomponent nanomaterials. The applicability of this approach toward the preparation of other inorganic systems, such as tungstates and molybdates, will be explored.     

Spectrochemical Properties of Noncubical Transition Metal Complexes in Solutions. XIV. Angular Overlap Studies of bis(Salicylidene-2-aminothiazole)Copper(II) in Various Solvents

The copper(II) complex [Cu(sat)], where Hsat is salicylidene-2-aminothiazole (bidentate Schiff - base), was studied in variety of solvents. In the solid state, the complex is black. It has been characterized by elemental analysis, solubility in common solvents, molar conductivity, and ultraviolet (UV) and visible (Vis) spectroscopy. The complex is easily soluble in common solvents such as chloroform, dimethylformamide, dimethyl sulfoxide, and 1,4-dioxane. The known crystal structure of similar compounds shows planar coordination geometry for the copper center. Combined multitechnique experiments have been applied to confirm the structure of the complex in solutions. The molar conductivities indicate their nonelectrolyte properties in all these solvents. The spectroscopic measurements were used to study the coordination properties of donoratoms and their bonding abilities.     

Gas chromatographic determination of estrone,estradiol and estriol in non-pregnancy plasma

Summary A gas Chromatographic method for the determination of estrone, estradiol and estriol in plasma of normal females is described. Purification is done by means of TLC of the free compounds and the acetates and quantitation is achieved by electron capture-gas chromatography of the estrogen heptafluorobutyrates. Experiments on the validation of the method are described along with some examples of its application.

---

Zusammenfassung Eine gaschromatographische Methode zur Bestimmung von Östron, Östradiol und Östriol im normalen weiblichen Plasma wurde beschrieben. Die Reinigung erfolgte durch Dünnschichtchromatographie der freien Verbindungen und ihrer Acetate. Die quantitative Bestimmung wurde gaschromatographisch mit Hilfe eines Elektroneneinfangdetektors an Hand der Östrogenheptafluorobutyrate bewerkstelligt. Versuche zur Bewertung dieser Methode sowie Beispiele für ihre Anwendung wurden beschrieben.

---

---

Supported by USPHS Grants AM 09908 and RCDA 5 K 3-AM-31, 321 (S. K.) and a grant from the Ford Foundation.     

Surface-enhanced Raman study of organic sulfides adsorbed on silver

The surface-enhanced Raman scatterings of dimethyl sulfide, diethyl sulfide and dimethyl disulfide have been investigated in silver sol. The dimethyl disulfide molecule decomposes on silver to the corresponding mercaptide implying facile cleavage of its S---S bond. The C---S bond in dialkyl monosulfide appears not to cleave on silver. For diethyl sulfide, the C₂ conformation seems to be favorable on silver than other conformations.