外循环式耐硫甲烷化反应器分析

建立了耐硫甲烷化循环式反应器的拟均相一维模型，考察了床层直径，循环比，入口气体温度及压力和温度范围对反应器操作的影响，结果表明：循环比和温度操作范围是反应器操作的决定因素，对日产５万标准立方煤气的反应器进行了优化设计分析。     

Analytical methodologies for aluminium speciation in environmental and biological samples--a review

It is recognized that aluminium (Al) is a potential environmental hazard. Acidic deposition has been linked to increased Al concentrations in natural waters. Elevated levels of Al might have serious consequences for biological communities. Of particular interest is the speciation of Al in aquatic environments, because Al toxicity depends on its forms and concentrations. In this paper, advances in analytical methodologies for Al speciation in environmental and biological samples during the past five years are reviewed. Concerns about the specific problems of Al speciation and highlights of some important methods are elucidated in sections devoted to hybrid techniques (HPLC or FPLC coupled with ET-AAS, ICP-AES, or ICP-MS), flow-injection analysis (FIA), nuclear magnetic resonance (27Al NMR), electrochemical analysis, and computer simulation. More than 130 references are cited.     

（Z）—3—丁烯基—4,5—二羟基苯酞的合成

（Ｚ）－３－丁烯基苯酞和它的衍生物广泛地存在于微形科植物，如当归、川芎等，这些植物有些是重要的中药材。（Ｚ）－３－丁烯基－４，５－二羟基苯酞是（Ｚ）－３－丁烯基苯酞的类似物；它对前列腺素Ｆ２α具有抑制作用。本文以３，４－二甲氧基苯甲醇（２）或价廉易得的胡椒醇（６）为起始原料，分别经四步反应顺利地合成了（Ｚ）－３－丁烯基－４，５羟基苯酞（１）。和一步是本方法的关键，即利用杂原子诱导的区域选择性的芳环     

Direct observation of rotational energy transfer in ammonia by time-resolved infrared—microwave double resonance

An N₂O laser is used to pump the ground vibrational state (8,7) inversion doublet of ¹⁴NH₃ while simultaneously monitoring other ground state doublets. Time-resolved rotational energy transfer signals are observed in accordance with known selection values. Absolute rates of rotational energy transfer processes are estimated.     

Two Novel Alkaloids from Zanthoxylum nitidum

Two novel alkaloids, 4,5‐dihydroxy‐1‐methyl‐3‐oxo‐2‐(trichloromethyl)‐3H‐indolium chloride ( 1 ) and 4‐(2‐methoxyethyl)‐N,N‐dimethylbenzenamine ( 2 ), were isolated from the EtOH extract of the roots of Zanthoxylum nitidum. Their structures were identified on the basis of spectroscopic and mass‐spectrometric analyses.     

络合型催化剂丙烯聚合动力学研究

本工作对络合型(Solvay型)TiCl_3催化剂—(C_2H_5)_2AlCl体系丙烯聚合进行了活性中心浓度C_p、链增长速率常数k_p和链增长活化能E_p等的测定,并与常规TiCl_3·0.33AlCl_3进行了比较,C_p以动力学方法求取,数均分子量以粘度法测定经分子量分布校正,结果表明,络合型催化剂活性比常规催化剂高,不仅是由于C_p增高,在更大程度上是由于k_p提高。     

Gamma-Ray Induced Polymerization of Vinyl Monomers in Bagasse

Vinyl monomers such as vinyl acetate, vinyl chloride, methyl methacrylate and styrene etc., can be polymerized without catalyst into the composites of bagasse material by gamma-radiation induced in situ liquid polymerization process. The fundamental factors, such as polymerization-rate, effect of swelling agent, molecular weight of vinyl polymers and graft reaction between bagasse cellulose and vinyl polymers, have been investigated and discussed. The use of suitable low G-value polar swelling agents and the application of suitable gamma dose-rate are two key factors found to control the smooth in situ liquid polymerization system of vinyl monomers in bagasse.     

Pre-Column Derivatization of Amines with 1,2-Benzo-3,4-Dihydrocarbazole-9-Isopropyl Chloroformate Followed by LC-Fluorescence and LC-APCI-MS

A pre-column derivatization method for the sensitive determination of amines using the labeling reagent 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl chloroformate (BCIC-Cl) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives is carried out by high performance liquid chromatography/atmospheric pressure chemical ionization (LC-APCI-MS-MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent is replaced by 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl functional group, which results in a sensitive fluorescence derivatizing reagent BCIC-Cl. BCIC-Cl can easily and quickly label amines. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography and show an intense protonated molecular ion corresponding m/z [MH]⁺ under APCI in positive-ion mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 260 corresponding to the cleavage of CH₂-OCO bond. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0–10.0. Maximal yields close to 100% are observed with a 3 to 4-fold molar reagent excess. In addition, the detection responses for BCIC derivatives are compared with those obtained using CEOC and FMOC as derivatization reagents. The ratios of I_BCIC/I_CEOC and I_BCIC/I_FMOC are, respectively, 1.23–3.14 and 1.25–3.08 for fluorescent (FL) responses (here, I is relative fluorescence intensity). Separation of the derivatized amines had been optimized on reversed-phase Eclipse XDB-C₈ column. Detection limits are calculated from 1.0 pmol injection, at a signal-to-noise ratio of 3, are 10.6–37.8 fmol. The mean interday accuracy ranges from 94 to 105% for fluorescence detection with the largest mean %CV<7.5. The mean interday precision for all standards is < 6.0% of the expected concentration. Excellent linear responses are observed with coefficients of > 0.9997. Revised: 12 December 2005 and 13 Febrauary 2006     

Electrical potential oscillation in an anionic surfactant system with barbitone in octanol as an oil phase

Studies were made on oscillations across a liquid membrane consisting of an oil layer, octanol containing barbitone, between two aqueous layers: one containing 8 mM SDS with alcohol and the other containing 0.1 M NaCl. The effects of various concentrations of chemical components in this system on the patterns of electrical oscillation were examined. The oscillations may be explained by the mechanism of repetitive formation and destruction of monolayer structures of the dodecyl sulfate anion at the interface between the organic and the aqueous phases, with the effect of proton penetration. This study of potential oscillation across a membrane containing a drug provides the possibility of further investigations in pharmacological activity.     

破碎-絮凝法分离细长碳纳米管与碳纤维

根据碳纤维与细长碳纳米管耐磨性能与絮凝沉降性能的差异，提出了一种有效分离细长碳纳米管与碳纤维的物理方法——破碎-絮凝法.该方法包括研磨破碎、液相分散、絮凝沉降、过滤分离等步骤，可高效去除混杂于细长碳纳米管样品中的碳纤维，同时还可去除螺旋状碳纤维及细小碳颗粒等易悬浮杂质.纯化过程对细长碳纳米管无损伤.用电子显微镜和热重分析表征了纯化效果，并初步分析了纯化机理.