丹荷颗粒治疗高脂血症质量标志物发现研究

为寻找丹荷颗粒治疗高脂血症的质量标志物,该研究基于丹荷颗粒体内成分分析结果,采用Cyto-scape软件构建高脂血症-共有靶点-丹荷颗粒体内成分作用网络,利用DAVID及String数据库分别对共有靶点进行生物过程、通路富集及网络拓扑分析,明确丹荷颗粒降脂作用关键靶点及成分,再建立油酸诱导的HepG2细胞脂质堆积模型验...     

高效液相色谱法测定食品接触材料及制品中9种酚类物质的迁移量

该文建立了苯酚、甲酚类、二甲酚类等9种酚类物质迁移量同时测定的高效液相色谱（HPLC）检测方法。采用Agilent ZORBAX SB－Aq色谱柱进行分离,以甲醇－水为流动相梯度洗脱,流速1.0 mL/min,荧光检测器测定,激发波长为214 nm,发射波长为315 nm。优化了含油脂食品模拟物中9种酚类物质的提取方式,并考察了线性范围、准确度及精密度等方法性能参数。研究结果表明,含油脂食品模拟物中9种酚类物质的最佳提取溶剂为67%甲醇溶液,9种酚类物质在水基及油脂类食品模拟物中的线性相关系数（r2）均高于0.999,回收率为90.7%～99.8%,相对标准偏差均低于6.0%。5种水基食品模拟物中9种酚类物质的定量下限为0.07～0.10 mg/L,橄榄油中9种酚类物质的定量下限为0.15～0.20 mg/kg。方法成功应用于11批食品接触用聚碳酸酯（PC）塑料制品、15批涂层制品中9种酚类物质迁移量的测定。该方法灵敏度高、精密度好,可为食品接触材料及制品中9种酚类物质迁移量的分析提供技术支持。     

物理化学在线课程教学设计与实践——以热力学第二定律与卡诺热机为例*

提出在线课程应立足于对线下课堂教学内容的疏导、梳理、凝练和升华,并以“热力学第二定律与卡诺热机”在线课程为例进行介绍。采用问题链形式引导学生从卡诺热机推导热力学第二定律数学表达式,阐明了卡诺热机在热力学第二定律形成过程中的重要作用和地位,强调了卡诺对于热力学的重要贡献,培养了学生探究精神和学科素养。为在线课程提供了教学案例和设计思路。     

二次离子电池高比容量负极碳载体的研究进展

二次离子电池商业化负极石墨的比容量已接近理论比容量. 合金型负极和金属负极因具有高比容量而受到广泛关注, 但其循环性能差和安全性问题限制了实际应用, 据此提出载体设计策略. 碳材料具有来源广泛、 易于调控等特性, 常用作二次离子电池高比容量负极的载体. 本文从碳载体的孔结构、 比表面积、 电子导电率、 离子导电率、 杂原子掺杂和界面修饰的角度出发, 综述了其在硅基、 磷基、 锗基、 锡基负极以及金属锂、 钠等负极中的研究进展, 展望了碳载体的发展前景和方向.     

选择性合成(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱及其光催化选择性双键转移的研究

席夫碱是一类具有多功能结构的化合物.本文使用二苯甲胺和苯乙酮为原料合成了(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱,并进行了光催化选择性双键转移的研究.结果 表明,当苯乙酮与二苯甲胺投料比为3∶1,先在135C反应4h,然后升温到165C继续反应3h,可选择性合成(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱.该席...     

Surface properties and doxorubicin delivery in mixed systems comprising a natural rosin-based ester tertiary amine and an anionic surfactant

A rosin-based ester tertiary amine salt (RETAS) cationic surfactant was obtained using natural rosin as raw material. GC-MS of RETAS was detailed analyzed. The pH-responsive mechanism of rosin-based ester tertiary amine (RETA) and RETAS was confirmed by applying theoretical calculations about electrostatic potential maps of RETA and RETAS cation using Gaussian software. Mixed system surfactants were obtained by blending RETAS cationic surfactant with sodium dodecyl benzene sulfonate (SDBS) anionic surfactant. The binary mixed surfactant systems of RETAS and SDBS had obvious synergistic effect. The γ_cmc and CMC were 39.40?mN/m and 0.56?mmol/L at the optimum molar fraction of RETAS (α)?=?0.6, respectively. The stability time of emulsion with the optimum mixed system as emulsifier increased to 309?s at α?=?0.6. The emulsifying capacity of RETAS was much better than that of RETA. RETAS had pH-responsive targeted release and the optimum mixed system showed a relatively sustained drug release by using doxorubicin (DOX) as a model drug. These results indicate that RETAS surfactant and mixed system surfactant are both promising for applications in drug delivery and emulsification.     

三维多孔核壳结构PdNi@Au催化剂的制备及对甲酸的电催化氧化

以K₂PdCl₄/K₂Ni(CN)₄为前驱体制备了具有凝胶特性的氰胶(Cyanogels), 利用硼氢化钠还原氰胶得到三维多孔珊瑚状PdNi合金前驱体, 在此基础上通过原位Galvanic置换反应, 制备得到内核为PdNi合金、 表面具有不同厚度Au层的三维多孔PdNi@Au催化剂. X射线衍射(XRD)分析和透射电子显微镜(TEM)观测结果显示, 该三维网状结构由粒径约7 nm的纳米颗粒相互连接形成; 能量分散光谱(EDX)线性扫描和元素分布(Mapping)分析显示该催化剂具有典型的核壳结构. 电化学测试结果表明, 表面Au层的厚度影响PdNi@Au催化剂的性能, 当Au的含量(摩尔分数)为5.6%时, 催化剂显示出对甲酸最佳的电催化活性, 对甲酸电催化氧化的峰电流密度达到商业化铂黑催化剂的7.2倍.     

以NiAl-NO3-LDH为前驱体制备Ni-Al2O3催化剂及其催化乙酰丙酸加氢性能

以NO₃^-插层类水滑石（NiAl-NO₃-LDH）为前驱体制备了一系列不同Ni/Al摩尔比的Ni-Al₂O₃催化剂,考察了其催化乙酰丙酸液相加氢性能.表征结果表明,随着Ni/Al摩尔比的增加,类水滑石层板结构中存在的游离态γ-AlOOH物种逐步演变为游离的Ni（OH）₂物种,制备的催化剂中金属-载体相互作用逐渐减弱,Ni物种分散度逐渐降低,表面酸性中心数量先增多后减少;当Ni/Al摩尔比为3时,所制备的催化剂表面具有最丰富的酸性中心和加氢中心.在酸性中心和加氢中心的协同作用下,该催化剂表现出优异的催化乙酰丙酸加氢合成γ-戊内酯性能及良好的使用稳定性.在160℃,4 MPa氢气条件下反应5 h时,γ-戊内酯的收率最高可达92.7%.     

[1,2,4]三唑并[3,4-b][1,3,4]噻二嗪类衍生物的合成及生物活性研究进展

[1,2,4]三唑并[3,4-b][1,3,4]噻二嗪作为极具前景的活性基团,在抗菌、抗肿瘤等方面具有多种药理活性,在药物和化学领域受到了广泛的关注。本文以含三唑并噻二嗪结构化合物的合成及其在抗肿瘤、抗菌等方面的生物活性为依据,对近几年国内外关于[1,2,4]三唑并[3,4-b][1,3,4]噻二嗪类化合物的研究进行分析总结,以期为后续该类新型抗肿瘤化合物的设计合成提供参考。     

A novel intumescent flame retardant imparts high flame retardancy to epoxy resin

Intumescent flame retardant (IFR) has received the considerable attention ascribed to the inherent advantages including non‐halogen, low toxicity, low smoke release and environmentally friendly. In this work, a novel charring agent poly (piperazine phenylaminophosphamide) named as PPTA was successfully synthesized and characterized by Fourier transform infrared spectra (FTIR) and X‐ray photoelectron spectroscopy (XPS). Then, a series of flame‐retardant EP samples were prepared by blending with ammonium polyphosphate (APP) and PPTA. Combustion tests include oxygen Index (LOI), vertical Burning Test (UL‐94) and cone calorimeter testing,these test results showed that PPTA greatly enhances the flame retardancy of EP/APP. According to detailed results, EP containing 10 wt% APP had a LOI value of 30.2%,but had no enhancement on UL‐94 rating. However, after both 7.5 wt% APP and 2.5 wt% PPTA were added, EP‐7 passed UL‐94 V‐0 rating with a LOI value of 33.0%. Moreover, the peak heat release rate (PHRR) and peak of smoke product rate (PSPR) of EP‐7 were greatly decreased. Meanwhile, the flame‐retardant mechanism of EP‐7 was investigated by scanning electron microscopy (SEM), thermogravimetric analysis/infrared spectrometry (TG‐IR) and X‐ray photoelectron spectroscopy (XPS). The corresponding results presented PPTA significantly increased the density of char layer, resulting in the good flame retardancy.