研磨法合成α,β-不饱和酮

将苯乙酮、芳香醛与KF Al2 O3 置于研钵中 ,在无溶剂条件下 ,室温研磨 5min后放置一定时间 ,得到收率 94%～ 98%的α ,β 不饱和酮 .该法反应条件温和 ,操作简便 ,KF Al2 O3 可回收再利用     

Preparation of a novel carboxyl stationary phase by “thiol‐ene” click chemistry for hydrophilic interaction chromatography

A novel carboxyl‐bonded silica stationary phase was prepared by “thiol‐ene” click chemistry. The resultant Thiol‐Click‐COOH phase was evaluated under hydrophilic interaction liquid chromatography (HILIC) mobile phase conditions. A comparison of the chromatographic performance of Thiol‐Click‐COOH and pure silica columns was performed according to the retention behaviors of analytes and the charged state of the stationary phases. The results indicated that the newly developed Thiol‐Click‐COOH column has a higher surface charge and stronger hydrophilicity than the pure silica column. Furthermore, the chromatographic behaviors of five nucleosides on the Thiol‐Click‐COOH phase were investigated in detail. Finally, a good separation of 13 nucleosides and bases, and four water‐soluble vitamins was achieved.     

Synthesis of 1‐Methyl‐3‐aryl‐substituted Titanocene and Zirconocene Dichlorides and Crystal Structure of Bis[η5‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium Dichloride

The syntheses of a series of l‐methyl‐3‐aryl‐substituted titanocene and zirconocene dichlorides are reported. These complexes are synthesized by the reaction of 2‐ and 3‐methyl‐6, 6‐dimethylfulvenes (1:4) with aryllithium, followed by the reaction with TiCl₄·2THF, ZrCl₄ and (CpTiCl₂)₂O respectively, to give complexes 1–5. The complex [η⁵‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium dichloride has been studied by X‐ray diffraction. The red crystal of this complex is monoclinic, space group P2_t/C with unit cell parameters: a =6.973(6) × 10^?1 nm, b =36.91(2) × 10^?1 nm, c = 10.063(4) × 10^?1 nm, α=β= γ = 93.35(5)°, V = 2584(5) × 10^?3 nm³ and Z = 4. Refinement for 1004 observed reflections gives the final R of 0.088. There are four independent molecules per unit cell.     

Preparation and characterization of electrostrictive polyurethane films with conductive polymer electrodes

All-polymer electrostrictive soft films were developed for the first time by depositing conductive polymer (polypyrrole) directly on both sides of solution-cast electrostrictive polyurethane elastomer films. The final composite films are flexible with strong adhesion between the polyurethane film and the conductive polymer electrode. The conductivity (sheet resistivity ∼1000 Ω/□), of the polymer electrode is appropriate for its intended use. The compatible interface between the polypyrrole electrode polymer and the electrostrictive polyurethane significantly improves the acoustic and optical transparency of these composite films, compared with using a metal electrode film. The all-polymer films also exhibit comparable dielectric properties to gold-electroded polyurethane films in the temperature range from −40^°C to +80^°C. The temperature range covers the soft segment glass transition temperature of the polyurethane elastomers, which is about −20^°C. The films also show large electric field induced strain responses which are dependent on film thickness and measurement frequency. The electrostrictive characteristics in the all-polymer films show similarities to those of the films with gold electrodes under identical measurement conditions. © 1998 John Wiley & Sons, Ltd.     

An ab initio molecular dynamics study on hydrogen bonds between water molecules

The quantitative estimation of the total interaction energy of a molecular system containing hydrogen bonds (H bonds) depends largely on how to identify H bonding. The conventional geometric criteria of H bonding are simple and convenient in application, but a certain amount of non-H bonding cases are also identified as H bonding. In order to investigate the wrong identification, we carry out a systematic calculation on the interaction energy of two water molecules at various orientation angles and distances using ab initio molecular dynamics method with the dispersion correction for the Becke-Lee-Yang-Parr (BLYP) functionals. It is shown that, at many orientation angles and distances, the interaction energies of the two water molecules exceed the energy criterion of the H bond, but they are still identified as H-bonded by the conventional "distance-angle" criteria. It is found that in these non-H bonding cases the wrong identification is mainly caused by short-range interaction between the two neighbouring water molecules. We thus propose that, in addition to the conventional distance and angle criteria of H bonding, the distance d(H···H) between the two neighbouring hydrogen atoms of the two water molecules should also be taken as a criterion, and the distance r(O···H) between the hydrogen atom of the H-bond donor molecule and the oxygen atom of the acceptor molecule should be restricted by a lower limit. When d(H···H) and r(O···H) are small (e.g., d(H···H) < 2.0 ? and r(O···H) < 1.62 ?), the repulsion between the two neighbouring atoms increases the total energy of the two water molecules dramatically and apparently weakens the binding of the water dimer. A statistical analysis and comparison of the numbers of the H bonds identified by using different criteria have been conducted on a Car-Parrinello ab initio molecular dynamics simulation with dispersion correction for a system of 64 water molecules at near-ambient temperature. They show that the majority of the H-bonds counted by using the conventional criteria combined with the d(H···H) criterion and the restriction of r(O···H) match what is identified by the binding energy criteria (e.g., E ≤ -10 kJ/mol), while some of them still have a binding energy that exceeds the energy criterion, indicating that the complicated quantum effects in H bonding can only be described by the three geometric parameters to a certain extent.     

Representation surfaces of Young''s modulus and Poisson''s ratio for BCC transition metals

 The general expressions for the compliance , Young's modulus E(h k l) and Poisson's ratio υ(h k l) along an arbitrary direction [h k l] are given for cubic crystals. The representation surfaces, for which the length of the radius vector in the [h k l] direction equals to E(h k l) or υ(h k l), are constructed for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic, both representation surfaces of Young's modulus and Poisson's ratio are spherical surfaces. The remaining BCC transition metals may be grouped into two classes. In the first group (Cr, Mo, Nb and V) with negative values of s_A, Young's modulus surface has eight depressed corners and six rounded protuberances at the centers of the faces. In the second group (Fe and Ta) with positive values of s_A, on the contrary, Young's modulus surface has eight rounded protuberance corners and six depressions at the centers of the faces. The contrary conclusions are obtained for Poisson's ratio.     

Widely tunable, high-repetition-rate, dual signal-wave optical parametric oscillator by using two periodically poled crystals

This paper reports on a high-repetition-rate dual signal-wave (DSW) optical parametric oscillator (OPO) operating at the 1.5 μm band with tunable wavelength intervals from 2.5 nm to 69.1 nm. Two periodically poled crystals, a periodically poled lithium niobate (PPLN) with multiple gratings and a single grating MgO-doped PPLN (PPMgOLN), are cascaded in the same OPO cavity to generate dual signal-waves by using quasi-phase-matched (QPM) technique. The pump source was a Q-switched diode-pumped Nd:YVO₄ laser operating at 50 kHz. At an incident pump power of 3 W, an average output power of 169.6 mW at 1489.2 nm and 1558.3 nm has been achieved.     

Investigation on the Design of Piezoelectric Actuator/Sensor for Damage Detection in Beam with Lamb Waves

Piezoelectric wafer type actuator/sensor is widely used to generate and sense Lamb waves for Structural Health Monitoring (SHM). However, multiple Lamb waves modes are generally excited with this type of transducer. As a result, there is some difficulty in using Lamb waves for damage detection. To selectively generate a single A₀/S₀ Lamb mode, the tuned excitation of Lamb waves has been studied by some researchers. This paper investigates the design of the PZT actuator/sensor bonded to beam-like structure for generating single A₀/S₀ Lamb mode. In the study it is found that some factors, including the bonding layer, the unknown material properties and dynamical characteristics of the beam, will influence the design of PZT actuator/sensor. Piezoelectric impedance technique is introduced to facilitate the design of PZT actuator/sensor. Crack detection in beam using the tuned A₀/S₀ Lamb waves is performed.     

铽(Ⅲ)-1,4-双(1′-苯基-3′-甲基-5′-氧代吡唑-4′-基)丁二酮-[1,4]体系荧光性质的研究及应用

本文研究了Tb(Ⅲ)-1,4-双(′-苯基-3′-甲基-5′-氧代吡唑-4′-基)丁二酮-[1,4](BPMPBD)-溴化十六烷基三甲胺(CTMAB)体系的荧光性质,探讨了响影体系荧光性质的诸因素,确定了最佳实验条件。该体系中Tb(Ⅲ)浓度以2.0×10~(-5)～1.0×10~(-10)mol/L范围内与其荧光强度呈线性关系,检测限可达到5.0×10~(-11)mol/L。应用于合成样品中微量Tb(Ⅲ)的分析,结果令人满意。     

Multicomponent approaches to 8-carboxylnaphthyl-functionalized pyrazolo[3,4-b]pyridine derivatives

A simple and novel protocol for the efficient synthesis of a series of 8-carboxylnaphthyl functionalized pyrazolo[3,4-b]pyridine derivatives was developed through a one-pot, three-component reaction involving acenaphthylene-1,2-dione and 1H-pyrazol-5-amine in acetic acid medium. The reaction represents the first facile conversion of acenaphthenequinone to naphthoic acid via C-C bond cleavage without need for multi-step transformation.