排序方式: 共有61条查询结果,搜索用时 15 毫秒
31.
Hannu Teisala Mikko Tuominen Mikko Aromaa Milena Stepien Jyrki M. Mäkelä Jarkko J. Saarinen Martti Toivakka Jurkka Kuusipalo 《Colloid and polymer science》2013,291(2):447-455
Surface wetting is an important and relevant phenomenon in several different fields. Scientists have introduced a large number of applications where special surface wetting could be exploited. Here, we study wetting phenomena on high- and low-adhesive superhydrophobic liquid flame spray (LFS)-generated TiO2 coatings on paper and pigment-coated board substrates using water–ethanol solution as a probe liquid. Submicrometer-scale air gaps, which exist on superhydrophobic surfaces below the liquid droplets, were more stable with the ethanol increment than the larger-scale micrometric air gaps. With the droplet ethanol concentration of 15 wt%, static contact angle as high as 155?±?2° was measured on the LFS–TiO2-coated board. Transition from the low-adhesive wetting state to the high-adhesive state was demonstrated on the LFS–TiO2-coated paper. The LFS method enables efficient roll-to-roll production of surfaces with special wetting properties on economically viable board and paper substrate materials. 相似文献
32.
Lauri Järvinen Jarkko Leiro Frej Bjondahl Claudio Carletti Tom Lundin Kristian Gunnelius Jan‐Henrik Smått Olav Eklund 《Surface and interface analysis : SIA》2015,47(2):284-294
The aim of this study was to compare different types of dolomites through batch reactivity experiments between HCl and dolomite powders, and ex‐situ characterisation of the particles before and after dissolution. Sedimentary dolomites were observed to have higher initial reactivities than metamorphic ones with sufficiently low calcite concentrations (<6% according to our regression model). In addition, the initial reactivities of the metamorphic dolomites were dependent on calcite concentration and could exceed those of the sedimentary dolomites. A regression model is presented for the dependence of initial reactivity on mineral composition and type of origin (sedimentary/metamorphic). The samples with the highest initial reactivities had also the largest BET (Brunauer, Emmet, Teller) surface areas obtained with nitrogen physisorption. Yet our data indicates that mineral composition of the dolomite has a greater influence on the initial reactivity than the BET surface area. Furthermore, it was found that the surface of sedimentary dolomites, unlike the surface of metamorphic dolomites, becomes porous during dissolution. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
33.
Jukka Hassinen Jussi Kauppila Jarkko Leiro Anni Määttänen Petri Ihalainen Jouko Peltonen Jukka Lukkari 《Analytical and bioanalytical chemistry》2013,405(11):3611-3617
The fabrication concept for a low-cost sensor device using reduced graphene oxide (rGO) as the sensing material on a porous paper substrate is presented. The sensors were characterized using conductivity and capacitance measurements, atomic force microscopy and X-ray photoelectron spectroscopy. The effects of different reducing agents, graphene oxide (GO) flake size and film thickness were studied. The sensor was sensitive to NO2, and devices based on a thin (10-nm) hydrazine-reduced GO layer had the best sensitivity, reaching a 70 % reduction in resistance after 10 min of exposure to 10 ppm NO2. The sensitivity was high enough for the detection of sub-parts per million levels of NO2. Desorption of gas molecules, i.e. the recovery of the sensor, could be accelerated by UV irradiation. The structure and preparation of the sensor are simple and up-scalable, allowing their fabrication in bulk quantities, and the fabrication concept can be applied to other materials, too. Figure
Low‐cost reduced graphene oxide based conductometric nitrogen dioxide sensitive sensor on paper 相似文献
34.
Tommi Palomki Miguel A. Caro Niklas Wester Sami Sainio Jarkko Etula Leena‐Sisko Johansson Jeon G. Han Jari Koskinen Tomi Laurila 《Electroanalysis》2019,31(4):746-755
Undoped a‐C thin films were deposited with varying power density from 10 to 25 W/cm2 using unbalanced closed‐field magnetron sputtering (CFUBMS). The effect of power density on the physical and electrochemical properties was investigated by experimental characterization methods and atomistic simulations. XPS indicated that the films were composed mostly of sp2‐bonded carbon (55–58 at.%) with a small amount of oxygen (8–9 at.%) in the surface region. The films appeared completely amorphous in XRD. The ID/IG ratio obtained by Raman spectroscopy indicated an increase from 1.76 to 2.34 with power density. The experimental and simulated data suggested a possible ordering and/or clustering of the sp2 phase with power density as the cause of the improved electrical properties of the a‐C films. The electrochemical properties of a‐C were between those of glassy carbon and tetrahedral amorphous carbon with potential windows ranging from 2.77 to 2.93 V and double‐layer capacitance values around 0.90 μF cm?2. Electron transfer for Ru(NH3)63+/2+ and FcMeOH+1/0 was reversible whereas that for IrCl62?/3? was quasi‐reversible. Peak potential separation of dopamine and oxidation potential of ascorbic acid decreased with power density, correlating with the structural and electrical changes of the films. The a‐C thin films deposited by CFUBMS are inherently conductive and their physical properties can be adjusted by varying the deposition parameters to a wide range of electrochemical applications. 相似文献
35.
36.
We present a method for optical identification of dielectric and metal nanoparticles in a liquid matrix using phase retrieval of reflectance with TE- and TM-polarized light. A formula is derived for extracting the effective complex dielectric function of a nanoparticle colloid based on different complex reflectance components. The phase retrieval is performed using the maximum entropy method. We observe excellent accuracy both for dielectric and metallic nanoparticles with volume fractions up to 10%. 相似文献
37.
38.
Lauri Järvinen Jarkko Leiro Markku Heinonen 《Surface and interface analysis : SIA》2014,46(6):399-406
Conventional X‐ray photoelectron spectroscopy (XPS) and synchrotron‐based X‐ray photoelectron spectroscopy (HRXPS) have been used to study Iceland spar calcite (CaCO3) and dolomite (CaMg(CO3)2). The obtained full widths at half maximum (FWHMs) are mostly narrower than in the previous results, which together with the symmetry of the fitted peaks indicate effective neutralisation of surface charging. Some previously unidentified features observed in the Ca 2p, C 1s and O 1s spectra of calcite have been suggested to be bulk plasmons. Also, surface core level shifts in Ca 2p (in calcite) and Mg 2p (in dolomite) spectra have been obtained and found to be consistent between XPS and HRXPS measurements. A peak attributed to carbide (CaC2) has been suggested to indicate beam‐assisted interaction with hydrocarbons found on the surface. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
39.
Jarkko Eskola Laura Oksa Mauri Nauma Markus Håkansson Sakari Kulmala 《Journal of luminescence》2006,118(2):238-244
A homogeneous immunoassay of T4 was developed using a semiautomatic electrochemiluminometer modified from a commercially available fluorometer. In addition, from the same analyte panel an immunometric immunoassay of TSH at similar disposable oxide-covered aluminum rake electrodes was studied using this instrument both on homogeneous and heterogeneous basis. Detection was based on hot electron-induced cathodic electrochemiluminescence utilizing a commercially available Tb(III) chelate label. The assays were reasonably sensitive and comparison was made with other older methods. Thus, it is possible to develop both non-competitive and competitive immunoassays based on detection of hot electron-induced ECL of the labels. 相似文献
40.
Ilja Ritamo Jarkko Räbinä Suvi Natunen Leena Valmu 《Analytical and bioanalytical chemistry》2013,405(8):2469-2480
Reversed-phase liquid chromatography on the nanoscale coupled to electrospray tandem mass spectrometry was used to analyse a mixture of four commercial glycan standards, and the method was further adapted to N-glycans enzymatically released from alpha-1-acid glycoprotein and immunoglobulin gamma. Glycans were permethylated to enable their separation by reversed-phase chromatography and to facilitate interpretation of fragmentation data. Prior to derivatization of glycans by permethylation, they were reduced to cancel anomerism because, although feasible, it was not desired to separate α- and β-anomers. The effect of supplementing chromatographic solvent with sodium hydroxide to guide adduct formation was investigated. Raising the temperature in which the separation was performed improved chromatographic resolution and affected retention times as expected. It was shown by using the tetrasaccharides sialyl Lewis X and sialyl Lewis A that reversed-phase chromatography could achieve the separation of methylated isobaric glycan analytes. Isobaric glycans were detected among the N-glycans of immunoglobulin gamma and further analysed by tandem mass spectrometry. 相似文献