Silicone‐urethane membranes for lithium batteries. Part 1. Moisture‐cured poly(siloxane‐urethane‐urea) elastomers containing polyethylene oxide (PEO) segments – synthesis and characterization as potential membrane materials

Poly(siloxane‐urethane‐urea) elastomers containing both polysiloxane and polyethylene oxide (PEO) segments in the polymer chain were obtained by moisture‐curing of NCO‐terminated poly(siloxane‐urethane) prepolymers synthesized from isophorone diisocyanate and mixtures of polyoxyethylene diols and polysiloxane diols with various molecular weights. Mechanical properties of the moisture‐cured films and their swelling ability in solvent mixtures commonly used in lithium batteries were investigated, and it was found that they were greatly influenced by PEO content in the polymer. PEO content in the polymer was also found to affect very much the electric conductivity of the films after immersion in lithium salt solution in ethylene carbonate–dimethyl carbonate solvent mixture. At high contents of PEO in the polymer chain specific conductivities of the films in a range of 10^?3, Scm^?1 could be achieved at room temperature. Based on the results of Scanning Electron Microscopy with X‐ray Analysis (SEM/EDS) investigations and wide‐angle X‐ray scattering and small‐angle X‐ray scattering studies, it could be anticipated that the reason for good conductivity of the films might be their specific supramolecular structure that potentially facilitated lithium ion mobility. Copyright © 2015 John Wiley & Sons, Ltd.     

9‐Methyl‐3‐phenyl­diazenyl‐9H‐carbazole: X‐ray and DFT‐calculated structures

The title compound, C₁₉H₁₅N₃, was prepared by condensation of 3‐nitroso­carbazole and aniline with subsequent methyl­ation. The structure is built up of stacks of almost planar mol­ecules. Density functional theory (DFT) calculations predict a completely planar conformation, different from that observed in the crystal lattice. HOMA (harmonic oscillator model of aromaticity) indices, calculated for three aromatic rings, demonstrate the small influence of the azo substituent on π electrons in the carbazole system.     

2,3‐Difluoro‐4‐formyl­phenyl­boronic acid

The mol­ecule of the title compound, 2,3‐F₂‐4‐(CHO)C₆H₂B(OH)₂ or C₇H₅BF₂O₃, contains a formyl group coplanar with the benzene ring. The boronic acid group is twisted with respect to the benzene ring plane. The mol­ecules are organized into infinite chains via inter­molecular O—H⋯O hydrogen bonds. These chains are additionally connected via strong O—H⋯O hydrogen bonds, producing a folded layer structure perpendicular to the a axis. These layers are paired due to B⋯F inter­actions.     

Solvent-generated HPLC systems with β-cyclodextrin derivatives as chiral additives

It is shown that enantioselective solvent-generated liquid-liquid and liquid-solid Chromatographic systems with -cyclodextrin derivatives can be realized. The liquid-liquid systems are based on ternary solvent systems of limited miscibility, containing chiral additives; the chiral stationary phase is spontaneously generated on the porous microparticulate silica used as a solid support. In the solvent-generated adsorption systems a very small proportion of -cyclodextrin derivatives is added to the mobile phase. These components act as column activators, since they are strongly adsorbed on the RP solid support where they form new stereoselective adsorption sites. It is demonstrated that dynamically generated systems with -cyclodextrin derivatives as chiral agents are powerful and versatile tools for enantioseparation of different types of compounds. This technique creates not only a new type of selectivity but also leads to very stable and reproducible Chromatographic columns.Dedicated to Professor J. F. K. Huber on the occasion of his 65th birthday     

Sampling volatile organic compounds using a modified solid phase microextraction device

Headspace solid phase microextraction (headspace SPME) has been demonstrated to be an excellent solvent-free sampling method. One of the major factors contributing to the success of headspace SPME is the concentrating effect of the fiber coating toward organic compounds. The affinity of the fiber coating toward very volatile analytes, such as chloromethane, may, however, not be large enough for detection at the parts per trillion concentration level. Static headspace analysis, on the other hand, is very effective for these very volatile compounds. As analyte volatility decreases, the sensitivity of static headspace analysis drops. The complementary nature of these two sampling methods can be exploited by combining the SPME device with a gastight syringe. The sensitivity of the new sampling device is better than that of SPME for very volatile compounds or that of static headspace analysis for less volatile compounds. This new method can sample a wide range of compounds from chloromethane (b.p. −24°C) to bromoform (b.p. 149°C) with estimated limits of detection at the low parts per trillion level.     

Bis-substituted benzo-15-crown-5 ethers as ion carriers in potassium ion-selective electrodes

Lipophilic bis-substituted ester and ether derivatives of benzo-15-crown-5 have been synthesised. The correlation between the structure and potentiometric ion-selectivity has been studied in PVC membrane ion-selective electrodes. An ion-selective potassium sensitive electrode based on 4,5-bis (biphenyloxymethyl)benzo-15-crown-5 exhibited the best electrode properties. The detection limit was loga _K = -5.4; logK _K,Na ^ppot = -3.5. The effect of the lipophilicity of neutral carriers upon electrode performance has been also discussed.     

Diastereoselective addition of vinylmagnesium halides to variously N-mono- and N,N-diprotected l-alaninals

Diastereoselective C₂-elongation processes of N-mono- 1a-c and N,N-diprotected 1d-fl-alaninals, using vinylmagnesium bromide and chloride, are described. A substantial difference between effects of the N-protecting groups replacing either one or two amino protons was observed.     

Structure and thermal properties of the fritted glazes in SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaO–MgO–Na<Subscript>2</Subscript>O–K<Subscript>2</Subscript>O–ZnO system

In this work, the structure and thermal properties of aluminosilicate fritted glazes in SiO₂–Al₂O₃–CaO–MgO–Na₂O–K₂O–ZnO system with (4.0 mol%) and without addition of ZnO were examined by GIXRD, FTIR, MAS-NMR and thermal methods (DTA, DIL). It has been found that the all experimental glazes are amorphous material (transparent glazes). On the base of spectroscopic investigations, it was found that zinc ions exist in the network glazes in the octahedral coordination—Zn²⁺ ions play a network modifier role in structure of glazes. An analysis of the data obtained from thermal tests showed that addition of ZnO into chemical composition results in decrease in glass transition temperature value (T _g) for all glazes (DTA, DIL). The coefficient of thermal expansion (α) is decreased as the whole measurement range for one series of fritted glazes.     

Synthesis of β-cyclodextrin-lysozyme conjugates and their physicochemical and biochemical properties

Recently a great interest in the field of protein engineering and the design of innovative drug delivery systems employing specific ligands such as cyclodextrins is observed. The paper reports the solid state, thermal method for protein coupling with β-cyclodextrin and the physicochemical and biological properties of the obtained conjugates. The structure of the obtained conjugates was investigated via liquid chromatography-mass spectrometry, dynamic light scattering and circular dichroism analysis. The presented conjugates were biologically active and covalently bound β-cyclodextrin preserved the ability to form inclusion complexes with the model compound. This report demonstrates the great potential of cyclodextrin as a modifying unit that can be used to modulate the properties of therapeutic proteins, additionally giving such conjugates the possibility to transport many therapeutic substances in the form of inclusion complexes. In addition, the paper presents the potential of protein-cyclodextrin conjugates to construct innovative bioactive molecules for biological and medical applications.