Electrochemical oxidation of alkyl-substituted allenes in methanol

Mono-, di- and tri-alkyl-substituted allenes were potentiostatically oxidized in methanol at graphite and Pt anodes. At the former electrode, α-methoxylated ketones (due to 4F/mole electricity consumption) and esters (6F/mole) were the major products. At a Pt anode, intermediate products such as vinyl-ether derivatives (2F/mole) were characterised too. Unlike the anodic oxidation of alkenes and alkynes previously reproted in the literature, dimerisation is not a typical process in the allenes' oxidation, since of all the products obtained only a sole dimer has been observed. The mechanism for the formation of most products is discussed.     

The synthesis of macrocyclic polyether-diesters incorporating 1,10-phenanthrolino and 1,8-naphthyridino subunits

The preparation of a series of macrocycles, formed by reaction of HO-(-CH₂-CH₂-O-)_nH with 1,10-phenanthroline-2,9-dicarbonyl chloride (n = 2,3,4) and 1,8-naphthyridine-2,7-dicarbonyl chloride (n = 3,4), is described. An improved synthetic route to 2,7-dimethyl-1,8-naphthyridine 9 is also reported.     

Improving catalyst scope: use of multiple aniline substrates to optimize a palladium-catalyzed bisdiene cyclization

[reaction: see text] Combinatorial screening of five catalyst precursors and nine ligands with three substituted aniline trapping reagents uncovered a catalyst system that promotes efficient palladium-catalyzed cyclization-trapping with a series of substituted anilines of varying steric and electronic character. The results of the parallel optimization study illustrate the interdependency of the key reaction variables.     

High-yield solvothermal formation of magnetic CoPt alloy nanowires

One-dimensional (1D) magnetic nanomaterials have attracted much attention recently because of their applications in magnetic recording and spintronics. Nevertheless, it remains a challenge to prepare free-standing magnetic nanowires in high yield. This Communication reports the successful high-yield synthesis of an interesting 1D ferromagnetic CoPt alloy by direct decomposition of platinum acetylacetonate and cobalt carbonyl compound in ethylenediamine solvent through a solvothermal reaction. The CoPt alloy nanowires obtained have a tunable diameter of 10-50 nm and a length along the longitudinal axis of up to several microns, depending on crystallization temperature and reaction time. A unique formation mechanism involving coarsening and ripening under solvothermal conditions was discovered. This research opens new opportunities in synthesizing nanomaterials through low-temperature solvothermal processes.     

Modeling the similarities and differences between the sodalite cages (β-cages) in the generic materials

Initially in this review the sodalite framework [T₁₂O₂₄]^6– (T=Al, Si] is modeled with regular tetrahedra and disordered T atoms. Equations are given for calculating atomic coordinates from the unit cell parameter a and the T—O distancet; the expansion or contraction of the sodalite-cage is related quantitatively to changes ina through the cooperative twists of TO₄ tetrahedra about 4 axes and changes in < TOT bridge angles. The fully expanded cage has=0° and the maximum value ofa. The equations are general for any framework formed by isomorphous substitution of T by atoms other than Al, Si and for any SiAl ratio. The model and equations are extended to the zeolite A framework, which can be built from fully expanded sodalite cages. With the cooperative tilt of the TO₄ tetrahedra of zeolite A, described by Depmeier, the major variable features of the zeolite A framework are explained quantitatively. The faujasite framework has twisted-cages (>0), as in sodalite examples, and is quantitatively modeled most conveniently from sodalite examples with similar-cage contents. The review is extended to structures with T-ordering and distorted tetrahedra. Methods are given for estimating a for sodalites from a knowledge of the cavity contents, especially the sizes of cations and anions, and so on, present. Ways of predicting cavity sites in zeolite A as a function of cation size are presented, and the principal cavity sites in the faujasite-cage region are discussed. Finally the review considers isomorphous replacement of T atoms (Si or Al) by B, Be, Fe, Ga, Ge, and P; many of these substituted frameworks are stabilized by templates, or guest molecules, which reside in the cavities. Templates also stabilize Si, Al frameworks with high SiAl ratios. The modeling approach reviewed here is tested on a range of isomorphously substituted frameworks isotypic with sodalite; observed and calculated values of twist and 12O₂₄]^12– with distorted tetrahedra; these are structures with Al-O-Al bridges, which violate Loewenstein's Rule.     

IN VITRO STUDIES ON THE PHOTOSENSITIZED OXIDATION OF LENS PROTEINS BY PORPHYRINS

Abstract Porphyrins, which may be introduced into the eye as a result of abnormal porphyrin metabolism (uroporphyrin–Uro) or when used in the diagnosis or photodynamic therapy of certain tumors, including intraocular tumors (hematoporphyrin–Hp and'hematoporphyrin derivative'–Hpd and mesotetra( P -sulfonatophenyl)porphyrin–TPPS) are efficient photosensitizers in biological systems. We have been studying the potential phototoxic side effects of these drugs in the lens of the eye. Encapsulated in the human lens is a mixture of soluble protein crystallins. With little turnover of protein in the lens, any photosensitized modifications will accumulate and may result in an opacification of the lens. To evaluate the potential of different porphyrins to induce such damage, a series of porphyrins were photolyzed (transmission above 295 nm) in the presence of calf lens protein (2 mg m⁻¹). Marked photopolymerization and histidine destruction were observed for the lens protein photolyzed in the presence of all of the drugs. We have found that the relative effectiveness of the following porphyrins to induce that damage is: Uro = TPPS Hpd = Hp. Both the singlet oxygen quencher, azide, and the free radical scavenger, penicillamine, decrease this photosensitized oxidative damage to lens protein. TPPS binds significantly to lens protein and this binding leads to conformational changes in that protein.     

The effect of the ammonium paratungstate source on the tungsten crystallite size

In an investigation into the effects of CaCl₂ on the sulfation of limestones in a laboratory furnace simulating fluidized-bed coal combustion conditions, small additions of CaCl₂ (<1 mole%) to the limestone prior to calcination were found to increase the extent of sulfation by changing the limestone pore structure. These changes were effected by trace amounts of liquid in the system in a synthetic SO₂/O₂ flue gas at 850°C. At much higher concentrations of CaCl₂, large amounts of a liquid phase are produced, containing a substantial quantity of dissolved CaO and leading to greatly enhanced sulfation when exposed to SO₂/O₂. The use of CaCl₂ additive in fluidized-bed combustion would reduce the quantity of limestones required to meet air pollution standards for SO₂ and also reduce the quantity of solid waste generated.     

The stereochemistry of organosulfur compounds. XIX. The crystal and molecular structure of 10-(1,3-dithiolan-2-ylidene)-10H-indeno[1,2-f]-1,2,3,4,5-pentathiepin

The molecular structure of 10-(1,3-Dithiolan-2-ylidene)-10H-indeno[1,2-f] -1,2,3,4,5-pentathiepin S₇C₁₂H₈₉ has been determined by single crystal X-ray diffraction. The crystals are triclinic, space group PI, with two molecules in a unit cell of dimensions α = 8.931(2), b = 9.387(2), c = 10.175(2) Å, α = 75.73(2), β = 73.35(1), γ = 64.37(2)°. The structure was solved by direct methods, and refined to a final R value of 3.3% for 1925 independent reflections. The molecule consists of an indene core with a nearly co-planar dithiolane and a fused pentasulfide chain. The S₅C₂ ring is in the chair configuration, with an average S? S distance of 2.052 Å. There is no variation of bond lengths as is frequently seen in multi-sulfur chains. The indenone ring shows no evidence of any delocalization, while the dithiolane ring is disordered at the two methylene positions. No attempt was made to resolve the disorder, since it is frequently seen and has been thoroughly investigated previously.     

Solubility of carbazole in binary chloroalkane + dibutyl ether solvent mixtures

Solubilities are reported for carbazole in three binary chloroalkane + dibutyl ether solvent mixtures at 25°C. Results of these measurements are compared with solution models developed for solubility in systems containing specific solute-solvent interactions. A simple model based on a single 1:1 carbazole:dibutyl ether complex described the solubility data, though the calculated equilibrium constant was about one-half of values published previously. A more sophisticated solution model, which assumes both carbazole:dibutyl ether and carbazole:chloroalkane complexes, was needed to thermodynamically describe the systems studied. Equilibrium constants for three presumed carbazole:chloroalkane complexes are calculated from measured carbazole solubilities.     

Treatment of zinc-contaminated water using a multistage ferrihydrite sorption system

Previous studies demonstrated the environmental and economic benefits of treating lead(II)-contaminated water streams with ferrihydrite in multiple equilibrium sorption stages. In this work, multistage ferrihydrite sorption systems were evaluated for their effectiveness in reducing single-solute zinc(II) (Zn(II)) concentrations in contaminated water streams to very low levels. As for lead(II) (Pb(II)), experimental data and modeling results indicate that a multistage sorption system can significantly reduce Zn(II) effluent concentrations for the same total amount of sorbent or, alternatively, dramatically lower total sorbent consumption for the same effluent Zn(II) concentration. Compared to Pb(II), however, Zn(II) removal requires on the order of 10 times more sorbent to achieve the same target effluent concentration for the same pH and number of stages. Model predictions were made using a steady-state, multistage, equilibrium adsorber model that was previously developed for and integrated into OLI Systems' Environmental Simulation Program (ESP). The modified triple-layer model was used to simulate Zn(II) surface-liquid equilibria within the adsorber model. Engineering screening evaluations again indicate that a 2- to 3-stage sorption process can provide significant economic savings when compared to a 1-stage process operating with the same target effluent Zn(II) concentration. Additional equilibrium stages beyond 2 or 3 provide diminishing economic returns. The major economic driver for multiple contacting stages is reduced capital investment and operating costs for sludge handling, dewatering, and disposal.