Supramolecular self-organization of "Janus-like" diblock codendrimers: synthesis, thermal behavior, and phase structure modeling

We report on the design and synthesis of three series of segmented amphiphilic block codendrimers, and on their self-organizing behavior in liquid-crystalline mesophases. Connecting two prefunctionalized monodendrons, each differing in their chemical constitution and generation number, yielded these diblock supermolecules. One wedge of the codendrimer was made hydrophobic, and is based on a branched poly(benzyl ether) monodendron functionalized at the periphery by lipophilic aliphatic fragments (also known as Percec dendrons). The other segment was made hydrophilic by the grafting of hydroxyl-containing moieties onto the focal functions of the former dendrons. Both types of dendrons were prepared independently by convergent methods and then joined in the ultimate stage of the synthetic procedure by cross-coupling reactions. In this way, the proportion of the dendritic blocks was varied independently to allow control of the hydrophilic/hydrophobic balance (HHB), the hydrogen-bonding ability, and consequently the capacity to tune the mesomorphic properties of the resulting "superamphiphiles" was anticipated. Essentially all the dendritic compounds display a thermotropic mesomorphism directly at or near room temperature as determined by using X-ray diffraction, polarized optical microscopy, and differential scanning calorimetry. The nature and the supramolecular organization of the mesophases, namely columnar and cubic phases, are correlated to the size of the respective block monodendrons and the chemical structures of the dendromesogens. The molecular organization within the cubic phases can be geometrically described and well understood by the space-filling polyhedron model.     

Base pairing within the psi32,psi39-modified anticodon arm of Escherichia coli tRNA(Phe)

The base-base hydrogen bond interactions of the psi32,psi39-modified anticodon arm of Escherichia coli tRNAPhe have been investigated using heteronuclear NMR spectroscopy. psi32 and psi39 were enzymatically introduced into a [13C,15N]-isotopically enriched RNA sequence corresponding to the tRNAPhe anticodon arm. Both the psi32-A38 and A31-psi39 nucleotide pairs form Watson-Crick base pairing schemes and the anticodon nucleotides adopt a triloop conformation. Similar effects were observed previously with D2-isopentenyl modification of the A37 N6 that also is native to the tRNAPhe anticodon arm. These results demonstrate that the individual modifications are not sufficient to produce the 32-38 bifurcated hydrogen bond or the U-turn motifs that are observed in crystal structures of tRNAs and tRNA-protein complexes. Thus the formation of these conserved structural features in solution likely require the synergistic interaction of multiple modifications.     

Stepwise formation and characterization of covalently linked multiporphyrin-imide architectures on Si(100)

A major challenge in molecular electronics and related fields entails the fabrication of elaborate molecular architectures on electroactive surfaces to yield hybrid molecular/semiconductor systems. A method has been developed for the stepwise synthesis of oligomers of porphyrins linked covalently via imide units. A triallyl-porphyrin bearing an amino group serves as the base unit on Si(100), and the alternating use of a dianhydride (3,3',4,4'-biphenyltetracarboxylic dianhydride) and a porphyrin-diamine for reaction enables the rapid and simple buildup of oligomers composed of 2-5 porphyrins. The properties of these porphyrin "multad" films on Si(100) were interrogated using a variety of techniques. The charge densities of the redox-active porphyrin oligomers were determined via electrochemical methods. The stepwise growth was evaluated in detail via Fourier transform infrared (FTIR) spectroscopy and by selected X-ray photoelectron spectroscopic (XPS) studies. The morphology was probed via AFM methods. Finally, the thickness was evaluated by using a combination of ellipsometry and AFM height profiling, accompanied by selected XPS studies. Collectively, these studies demonstrate that high charge density, ultrathin, multiporphyrin films of relatively well-controlled thickness can be grown in a stepwise fashion using the imide-forming reaction. The increased charge densities afforded by the porphyrin multads may prove important for the fabrication of molecular-based information-storage devices. This bottom-up process for construction of surface-tethered molecular architectures complements the top-down lithographic approach for construction of functional devices with nanoscale dimensions.     

Parameters characterizing acid-base equilibria between cell membrane and solution and their application to monitoring the effect of various factors on the membrane

The cell membrane is an extremely complicated object. It participates in a large number of equilibria. For this reason, it is impossible to determine the parameters of all of them. It is the purpose of this work to define a limited number of averaged parameters in order to describe the equilibria between cell membrane components and environmental components. These parameters are the total acidic functional group concentration as well as the basic group concentration and their association constants with hydrogen or hydroxyl ions. The parameters were determined using the pH dependence of the electric surface charge density. The usefulness of these parameters was checked by studying the effect of green tea on liver cells in ethanol poisoning. Ethanol provokes an increase in concentration of functional groups, positively and negatively charged, as well as an increase in the basic groups association constant and a decrease in acidic groups association constant. Administering green tea partly compensates the changes provoked by ethanol poisoning. The parameters proposed in this work, C(TA), C(TB), K(AH) and K(BOH), are suited for monitoring the changes caused by various factors.     

Chalcogenide-halides of niobium (V). 1. Gas-phase structures of NbOBr(3), NbSBr(3), and NbSCl(3). 2. Matrix infrared spectra and vibrational force fields of NbOBr(3), NbSBr(3), NbSCl(3), and NbOCl(3)

The molecular structures of NbOBr(3), NbSCl(3), and NbSBr(3) have been determined by gas-phase electron diffraction (GED) at nozzle-tip temperatures of 250 degrees C, taking into account the possible presence of NbOCl(3) as a contaminant in the NbSCl(3) sample and NbOBr(3) in the NbSBr(3) sample. The experimental data are consistent with trigonal-pyramidal molecules having C(3)(v)() symmetry. Infrared spectra of molecules trapped in argon or nitrogen matrices were recorded and exhibit the characteristic fundamental stretching modes for C(3)(v)() species. Well resolved isotopic fine structure ((35)Cl and (37)Cl) was observed for NbSCl(3), and for NbOCl(3) which occurred as an impurity in the NbSCl(3) spectra. Quantum mechanical calculations of the structures and vibrational frequencies of the four YNbX(3) molecules (Y = O, S; X = Cl, Br) were carried out at several levels of theory, most importantly B3LYP DFT with either the Stuttgart RSC ECP or Hay-Wadt (n + 1) ECP VDZ basis set for Nb and the 6-311G basis set for the nonmetal atoms. Theoretical values for the bond lengths are 0.01-0.04 A longer than the experimental ones of type r(a), in accord with general experience, but the bond angles with theoretical minus experimental differences of only 1.0-1.5 degrees are notably accurate. Symmetrized force fields were also calculated. The experimental bond lengths (r(g)/A) and angles ( 90 degree angle (alpha)()/deg) with estimated 2sigma uncertainties from GED are as follows. NbOBr(3): r(Nb=O) = 1.694(7), r(Nb-Br) = 2.429(2), 90 degree angle (O=Nb-Br) = 107.3(5), 90 degree angle (Br-Nb-Br) = 111.5(5). NbSBr(3): r(Nb=S) = 2.134(10), r(Nb-Br) = 2.408(4), 90 degree angle (S=Nb-Br) = 106.6(7), 90 degree angle (Br-Nb-Br) = 112.2(6). NbSCl(3): r(Nb=S) = 2.120(10),r(Nb-Cl) = 2.271(6), 90 degree angle (S=Nb-Cl) = 107.8(12), 90 degree angle (Cl-Nb-Cl) = 111.1(11).     

Deposition of bulk GaN from solution in gallium under high N2 pressure on silicon carbide and sapphire substrates

Results of high-pressure directional growth of GaN on foreign substrates: SiC, sapphire and GaN/sapphire MOCVD templates are presented. The role of nitrogen pressure and supersaturation in the growth process is discussed. The conditions for stable growth of the nitride are determined. The results of the crystallization process are compared with those obtained for directional growth on pressure grown GaN crystals.     

Synthesis of Epoxy Methacrylate Resin and Coatings Preparation by Cationic and Radical Photocrosslinking

This work involves the synthesis of hybrid oligomers based on the epoxy methacrylate resin. The EA resin was obtained by the modification of industrial-grade bisphenol A-based epoxy resin and methacrylic acid has been synthesized in order to develop multifunctional resins comprising both epoxide group and reactive, terminal unsaturation. Owing to the presence of both epoxy and double carbon–carbon pendant groups, the reaction product exhibits photocrosslinking via two distinct mechanisms: (i) cationic ring-opening polymerization and (ii) free radical polymerization. Monitoring of EA synthesis reactions over time using PAVs, MAAC and NV parameters, and the FT-IR method reveals that esterification reactions proceed faster at the start, exhibiting over 40% of conversion within the initial 60 min, which can be associated with a relatively high concentration of reactive sites and low viscosity of the reaction mixture at the initial reaction stage. With the further increase in the reaction time, the reaction rate tends to decrease. The control of the EA synthesis process can guide how to adjust reactions to obtain EAs with desired characteristics. Based on obtained values, one can state that the optimum synthesis time of about 4–5 h should be adopted to prepare EAs having both epoxy groups and unsaturated double bonds. The structure of the obtained EA was confirmed by FT-IR and NMR methods, as well as the determination of partial acid value and epoxy equivalent. Samples at various stages of synthesis were cured with UV radiation in order to study the kinetics of the process according to cationic and radical polymerization determined via photo-differential scanning calorimetry (photo-DSC) and real-time infrared spectroscopy (RT-IR) and then the properties of the cured coatings were tested. It turned out that the cationic polymerization was slower with a lower conversion of the photoreactive groups, as compared to the radical polymerization. All the obtained EA coatings were characterized by good properties of cured coatings and can be successfully used in the coating-forming sector.     

Theoretical Studies on the Mechanism of deNOx Process in Cu–Zn Bimetallic System—Comparison of FAU and MFI Zeolites

In the present study we propose a more promising catalyst for the deNOx process to eliminate harmful nitrogen oxides from the environment. The study was performed with a computer calculation using density functional theory (DFT) based on an ab initio method. Two zeolite catalysts, FAU and MFI, were selected with additional Cu–O–Zn bimetallic dimer adsorbed inside the pores of both zeolites. Based on the analysis of preliminary studies, the most probable way of co-adsorption of nitric oxide and ammonia was selected, which became the initial configuration for the reaction mechanism. Two types of mechanisms were proposed: with hydroxyl groups on a bridged position of the dimer or a hydroxyl group on one of the metal atoms of the dimer. Based on the results, it was determined that the FAU zeolite with a bimetallic dimer and an OH group on the zinc atom was the most efficient configuration with a relatively low energy barrier. The real advantage of the Cu–Zn system over FAU and MFI in hydrothermal conditions has been demonstrated in comparison to a conventional Cu–Cu catalyst.     

Permeability of the Perindopril Arginine under In Vitro Conditions across Caco-2 Monolayer and Biomimetic Phospholipid Membrane

Perindopril arginine (PA) as an angiotensin-converting enzyme (ACE) inhibitor is widely used in cardiovascular diseases, especially in systemic hypertension and heart failure. Although the pharmacokinetics of PA are well documented, there is no available detailed data on its permeation in in vitro conditions. The present study aimed to assess the transport of PA across both biological membranes and artificial biomimetic ones. For the determination of PA transport, the Caco-2 cell line was selected as a reliable in vitro model of gastrointestinal biological barriers. Additionally, a novel 96-well plate with phospholipid membrane PermeaPad was used to evaluate the transport of PA by passive diffusion. We confirmed that PA is relatively poorly permeable across the Caco-2 monolayer. The permeability results obtained from the non-cell-based model demonstrated higher transport of PA as compared to that of Caco-2. Thus, PA transport across the biological membranes might be suggested to be regulated by the membrane transporters.