Spectropolarised ray-tracing simulations in densely packed particulate medium

Light scattering from particulate medium is simulated using the Monte Carlo ray-tracing technique. The medium is modelled as a randomly packed medium of ellipsoidal grains with stochastically rough surfaces, with an optional thin coating. Optical properties are modelled using a wavelength-dependent complex refractive index and taking Fresnelian reflections and refractions from the interfaces. The size and shape of the grains are assumed to be large and smooth enough for geometric optics to apply reasonably well.The ray-tracing technique uses parallel, weighted rays for computing simultaneously over a wide wavelength spectrum and a small roughness range, and scaling to obtain a large range of sizes and absorbities simultaneously. Polarisation is fully accounted for. The multiobservation technique is effectively used at each scattering point. The scattering from thinner sample layers is also received as a subresult.Simulations are run for a set of model samples to study the effects and sensitivities regarding the values of certain parameters. It has been found that the size and composition of the grains affect the scattering in a unique and invertible way. The shape of the grain causes similar significant effects that must certainly be taken into account if any accuracy is required, although inverting for the shape is difficult without further constraints. The packing density has a small but observable effect. Polarisation can be used to study the composition of low-albedo objects.     

Asymptotic estimation of states of linear nonautonomous systems with scalar output

For a linear nonautonomous system with one output, the existence conditions for an identifier that estimates the current state with exponential rate are established. An algorithm for constructing such an identifier is described and its dependence on small perturbations of coefficients is studied.     

Investigation of annealing effects on the structural, magnetic and transport properties of Co/GaAs(0 0 1) thin films

Present paper deals with the structural, magnetic and transport studies of as-deposited as well as annealed Co/GaAs(0 0 1) thin film at different temperatures. The X-ray diffraction measurements show oriented growth of as-deposited Co film in the hcp (0 0 2) direction. However, the sample annealed at higher temperatures shows formation of ternary Co₂GaAs phase at the interface. Corresponding magnetic and transport measurements show decrement in magnetization and resistivity with annealing temperatures. The observed reductions in magnetization and resistivity values are mainly attributed to the formation of ternary Co₂GaAs phase at the interface.     

Influence of octupole interactions on the behavior of negative-parity states at low spins

The energies of negative-parity levels based on two-particle states exhibit a nonlinear behavior at low spins versus the core-rotation energy because the alignment process has not yet been completed for them. This behavior of negative-parity levels in the low-spin region is satisfactorily described upon the inclusion of octupole-octupole interactions. This is demonstrated within the rotational model involving the Coriolis mixing of states for the even-even isotopes ^162–168Hf.     

Surface distortions of the magnetic structure of a uniaxial antiferromagnet: The “magnetic field-roughness” phase diagram

Magnetic-structure distortions induced by an external magnetic field near a rough surface of a uniaxial collinear antiferromagnet are analyzed using mathematical modeling. The “magnetic field-roughness” phase diagram of these distortions is constructed. It is demonstrated that, under specific conditions, the presence of atomic steps leads to the formation of domains in the surface layer of the antiferromagnet. In the case of a strong roughness, there arise static vortices at the surface and a 90° domain wall aligned parallel to the surface of the antiferromagnet.     

Nonlinear-optical and micro-Raman diagnostics of thin films and nanostructures of ABO3 ferroelectrics

Ferroelectric composite two-dimensional ferroelectric/aluminum oxide nanostructures were studied. A porous aluminum oxide matrix was used as a template into which a ferroelectric precursor was introduced, followed by annealing. The prepared nanostructures were studied using optical second harmonic generation and micro-Raman scattering.     

Metallic films forming on the surface of alkali-halide crystals during thermal diffusion of intracrystalline immpurities

It was detected for the first time that films consisting of a transition-metal-based structure form (via thermal diffusion of intracrystalline impurities) on the surface of alkali-halide (LiF, NaF) crystals activated by transition metals Co, Ni, or Mn. The thickness, density, and composition of the films are shown to be different, depending on the heat treatment conditions. The crystals were annealed at temperatures varying from 473 to 1073 K in vacuum and air. The surface structures forming upon annealing in vacuum exhibit magnetic properties. The films were studied by optical, x-ray fluorescence, and electron spectroscopy to reveal the mechanisms of transition-metal film formation during thermal annealing.     

Localising gravity in composite monopole brane worlds without bulk cosmological constant

We study a 7-dimensional brane world scenario with a Ricci-flat 3-brane residing in the core of a composite monopole defect, i.e., a defect composed of a 't Hooft–Polyakov and a global monopole. Admitting a direct interaction between the two bosonic sectors of the theory, we analyse the structure of the space–time in the limits of small, respectively large direct interaction coupling constant. For large direct interaction, the global monopole disappears from the system and leaves behind a negative cosmological constant in the bulk such that gravity-localising solutions are possible without a priori introduction of a bulk cosmological constant.     

Investigations of He implantation and subsequent annealing effects in InP

The influence of 70 keV He⁺ ion implantation and subsequent annealing of Cz-indium phosphide (InP) samples has been investigated using a slow positron beam-based Doppler broadening spectrometer. Three samples with ion fluences of 1 × 10¹⁶, 5 × 10¹⁶ and 1 × 10¹⁷ cm⁻² were studied in the as-implanted condition as well as after annealing at 640 °C for times between 5 and 40 min. It was found that the line-shape parameter of the positron-electron annihilation peak in the implanted layer increases after 5 min annealing, then after longer annealing times it starts to decline gradually until it reaches a value close to the value of the as-grown sample. This implies that vacancy-like defects can be created in InP by He implantation followed by short-thermal annealing at T > 600 °C. Comparison of the results with a study where cavities were observed in He-implanted InP has been carried out.     

Optical properties of Fe-doped silica films on Si

Optical properties of Fe-doped silica films on Si were investigated by ellipsometric technique in the region 1-5 eV. Samples were produced by sol-gel method. Precursors were prepared by mixing tetraethoxysilane (TEOS) solution in ethanol and water with aqueous solution of Fe-chloride or Fe-acetate. The coating solution was deposited on Si substrates by spin on technique. The size of Fe-containing nanometric-sized particles depended on technology and varied from 20 to 100 nm. Optical response of complex hybrid samples SiO₂:Fe/Si was interpreted in a multi-layer model. In the inverse problem, the Maxwell equations were solved by transfer matrix technique. Dielectric function of Fe-doped silica layers was calculated in the model of effective media. Analysis of optical data has shown that various Fe-oxides formed. Experimental data for films obtained from precursors with Fe-acetate and annealed in hydrogen were well described by the model calculations taking into account a small contribution 1-5% of metal Fe imbedded in silica. The Fe/Fe-O contribution to optical response increased for samples grown from FeCl₃-precursor. Ellipsometric data for Fe-doped silica films on Si were interpreted taking into account the structural AFM studies as well as the results of magnetic measurements.