Selective growth of ag nanowires on Si(111) surfaces by electroless deposition

Electroless deposition of Ag on atomically flat H-terminated Si(111) surfaces in aqueous alkaline solutions containing Ag ions produced two different sizes of Ag nanowires along atomic step edges: (1) a narrow nanowire of 10 nm in width and 0.5 nm in height and (2) a wide nanowire of 35 nm in width and 11 nm in height. The narrow and wide nanowires were formed by immersion in the solutions containing less than 1 ppb and 8 ppm dissolved-oxygen concentrations, respectively. This result indicates that the dissolved oxygen initiates the formation of Ag nucleation sites and that the fabrication method has a possibility of controlling the size of Ag nanowires.     

Synthesis and characterization of 6-O-acyl-2-O-alpha-D-glucopyranosyl-L-ascorbic acids with a branched-acyl chain

We previously reported the chemical synthesis of a series of novel monoacylated vitamin C derivatives, 6-O-acyl-2-O-alpha-D-glucopyranosyl-L-ascorbic acids (6-Acyl-AA-2G) possessing a straight-acyl chain of varying length from C(4) to C(18), as effective skin antioxidants. In this paper, we describe branched type of 6-Acyl-AA-2G derivatives (6-bAcyl-AA-2G) synthesized by use of a 2-branched-chain fatty acid anhydride as an acyl donor. The stability of 6-bAcyl-AA-2G in neutral solution was much higher than that of 6-Acyl-AA-2G, while they were susceptible to enzymatic hydrolysis for exerting vitamin C effect. These branched derivatives as well as 6-Acyl-AA-2G increased the radical scavenging activity against 1, 1-diphenyl-2-picrylhydrazyl and the lipophilicity in octanol/water-partitioning systems with increasing length of their acyl group. In addition, the 6-bAcyl-AA-2G derivative with an acyl chain of C(12), 6-bDode-AA-2G had the excellent solubility to various solvents, suggesting easy handling in cosmetic use. These characteristics of 6-bAcyl-AA-2G may be available for skin care application as an effective antioxidant.     

Photoluminescence enhancement of PEG-modified YAG:Ce3+ nanocrystal phosphor prepared by glycothermal method

Y3Al5O12:Ce3+ (YAG:Ce3+) nanocrystals were synthesized in 1,4-butylene glycol (BG) with and without poly(ethylene glycol) (PEG) by the glycothermal method. The internal quantum efficiency of the photoluminescence (PL) corresponding to the 5d --> 4f transition of Ce3+ in the YAG:Ce3+ nanocrystal increased from 21.3 to 37.9% by addition of PEG, while no appreciable change in the primary particle size, the crystallite size, and the lattice distortion was recognized by transmission electron microscopy and X-ray diffractometry. The thermogravimetry-differential thermal analysis, Fourier transform infrared absorption spectroscopy and 1H --> 13C cross-polarization magic angle spinning nuclear magnetic resonance (CP-MAS NMR) confirmed the preferential coordination of PEG to the YAG:Ce3+ nanocrystal. 27Al single-pulse excitation MAS NMR reveals that the ratio of the 4-fold coordination site to the 6-fold coordination site increased from 0.53 to 0.72 by addition of PEG. We conclude that the surface modification of the YAG:Ce3+ nanocrystal by PEG induces the surface passivation, the prevention of the oxidation of Ce3+ to Ce4+, the promotion of the incorporation of Ce3+ into YAG and the local structural rearrangement, resulting in the PL enhancement.     

Effects of solvent in photo-induced graft copolymerization of vinyl monomers on cellulose

The effects of swelling of the sample and polymerization solvents were studied for photo-induced graft copolymerization of vinyl monomers on cellulose. The graft copolymerization of methyl methacrylate (MMA) was activated by swelling of the sample or organic solvent-water solutions within a certain range of their concentrations. Though each organic solvent gave a maximum in per cent grafting and the number of grafts at about 25 vol-% concentration, the initiation reaction scarcely took place at 100% concentration; thus, the solvent itself is considered to have a negative effect. The solvents used in the experiments were all hydrophilic, such as methanol, acetone, and dioxane. The average molecular weight of the grafted PMMA differed in each solvent, indicating a different characteristic effect of solvent on the growing grafted polymer radicals. The presence of ferric ion as a sensitizer stimulated further the contributions of the sample swelling and the organic solvents to the copolymerization reaction. A similar effect was observed for styrene as for MMA, but not for acrylic acid and methacrylic acid.     

New synthesis of 5-amino-5-deazaflavin derivatives by direct coupling of 5-deazaflavins and amines

5-Amino-5-deazaflavin derivatives are newly synthesized by direct coupling of 5-deazaflavins and amines. Some of them revealed potential activity toward tumor cells such as L1210 or KB cells.     

Thermally-induced radical rearrangement of 2-(2-thienylmethoxy)-and 2-(2-benzo[b]thienylmethoxy)tropones

Upon heating at ca. 160°, 2-(2-thienylmethoxy)tropone afforded 3- and 5(2-thienylmethyl)tropolones. Formation of 3,5-bis(2-thienylmethyl)tropolone and unsubstituted tropolone indicated a radical chain mechanism for the thermolysis.     

Effect of oral pretreatment with antibiotics on the hydrolysis of salicylic acid-tyrosine and salicylic acid-methionine prodrugs in rabbit intestinal microorganisms.

We examined the hydrolysis mechanism of salicylic acid-tyrosine (salicyl-tyrosine) and salicylic acid-methionine conjugate (salicyl-methionine) in rabbits by exploring their behavior following intraduodenal and intracecal administration (72 and 36 mumol/kg, respectively: salicylic acid equivalent). A large amount of salicyl-methionine was absorbed following intraduodenal administration of salicyl-methionine, without being metabolized to salicylic acid in the small intestinal mucosa. On the contrary, salicylic acid was detected in the blood following intraduodenal administration of salicyl-tyrosine, suggesting that salicyl-tyrosine was metabolized in the small intestinal mucosa. After oral pretreatment of rabbits with kanamycin sulfate (6 x 400 mg) or tinidazole (6 x 160 mg), the hydrolysis of salicyl-tyrosine and salicyl-methionine following intracecal administration was inhibited significantly, indicating that the intestinal microorganisms were responsible for the biotransformation of these prodrugs. Furthermore, in rabbits orally pretreated with both kanamycin sulfate and tinidazole, a significant inhibition of salicylic acid formation from salicyl-tyrosine and salicyl-methionine following intracecal administration was observed.     

Layer-by-layer assembled multilayer films of titanate nanotubes, Ag- or Au-loaded nanotubes, and nanotubes/nanosheets with polycations

Aqueous suspensions of hydrothermally synthesized titanate nanotubes and poly(diallyldimethylammonium chloride) (PDDA) have been employed to fabricate multilayer films on various substrates in a layer-by-layer fashion. Atomic force microscopy displays the dense coverage of the substrate surface by the nanotubes. UV-vis absorption spectroscopy confirms the consecutive growth of PDDA/nanotube layer pairs. Single crystalline Ag and Au nanoparticles with narrow size distribution spatially correlating with the nanotubes have been obtained by treating the nanotubes with AgNO(3) or HAuCl(4) aqueous solution followed by chemical reduction. The noble metal nanoparticles show a strong surface plasmon absorption band. A multilayer film construction of the noble-metal-loaded nanotubes has also been achieved. This process has been further extended to the heteroassembly of nanotubes/nanosheets in different layer sequences.     

Synthesis of racemic and optically active forms of lineatin,the unique tricyclic pheromone of trypodendron lineatum (olivier)

(±) - 33,7 - Trimethyl - 2,9 - dioxatricyclo[3.3.1.0^4,7]nonane 1 and (±) - 3,3,7 - trimethyl - 2,9-dioxatricyclo [4.2.1.0^4,7]nonane 2 were synthesized. The former was shown to be (±)-lineatin, an ambrosia beetle pheromone. A selective synthesis of (±)-lineatin was devised, which was modified to yield the both enantiomers of lineatin via optical resolution of an intermediate.     

Photo-induced graft copolymerization of methyl methacrylate on cellulose

Graft copolymerization initiated by ultraviolet light irradiation at 40°C in a hard glass vessel under nitrogen was examined. The graft copolymerization was observed to occur easily after some induction period without any use of photosensitizer, though it was found the per cent grafting and the grafting efficiency were markedly affected by the quantities of cellulose and monomer. In the system without cellulose, homopolymerization of methyl methacrylate hardly took place, but the use of cellulose caused the formation of homopolymer too, and a grafting efficiency in the range of 60–80% generally resulted. Ferric chloride or sodium anthraquinone-2,7-disulfonate (AQ) acted on the polymerization reaction as photosensitizers to reduce its induction period. Though ferric chloride acted to develop both the per cent grafting and the number of grafts, not the same effects were observed with AQ. Oxalic acid, which was employed with the object of eliminating very small amount of metals contained in cellulose, was found to act favorably in the formation of grafts, much like ferric chloride.