Electromagnetophoretic force measurement of a single binding interaction between lectin and yeast cell surfaces.

A novel measurement method of the binding force between a micrometer-sized particle and a solid surface in an electrolyte solution has been established by using the electromagnetophoretic buoyancy on the particle. By this method, we investigated the binding force between a yeast cell surface and an oligosaccharide-binding protein, concanavalin A (Con A), fixed on a silica capillary wall. The force measurement was carried out up to 60 pN. In a lower surface concentration of Con A, yeast cells could be desorbed by a force less than 60 pN. However, in a higher surface concentration after treated by 1 mg ml(-1) solution, yeast cells were adsorbed with a force stronger than 60 pN. In this case, the addition of 10 mg ml(-1) D-mannose solution to the medium reduced the binding force to less than 60 pN. The observed adsorption force of yeast cells ranged within 30 - 40 pN, regardless of the interfacial amount of Con A. This force was thought to be the single binding force between a mannose group of the cell surface and an active site of Con A. Moreover, the dissociation rate constant of the single binding of yeast cell and Con A complex was determined as 4.6 x 10(-3) s(-1) and the increment of the binding distance at the transition state as 0.33 nm from the desorption kinetic experiments of yeast cell under the constant pulling conditions of 10, 20 and 30 pN. Such satisfactory results demonstrate the novel advantages of the present method.     

On the Metrical Theory of Continued Fraction Mixing Fibred Systems and Its Application to Jacobi-Perron Algorithm

 We study the metrical theory of fibred systems, in particular, in the case of continued fraction mixing systems. We get the limit distribution of the largest value of a continued fraction mixing stationary stochastic process with infinite expectation and some related results. These are analogous to J. Galambos, W. Philipp, and H. G. Diamond–J. D. Vaaler theorems for the regular continued fractions. As an application, we see that these theorems hold for Jacobi-Perron algorithm. Received September 30, 2001; in revised form January 8, 2002     

Effects of solvent in photo-induced graft copolymerization of vinyl monomers on cellulose

The effects of swelling of the sample and polymerization solvents were studied for photo-induced graft copolymerization of vinyl monomers on cellulose. The graft copolymerization of methyl methacrylate (MMA) was activated by swelling of the sample or organic solvent-water solutions within a certain range of their concentrations. Though each organic solvent gave a maximum in per cent grafting and the number of grafts at about 25 vol-% concentration, the initiation reaction scarcely took place at 100% concentration; thus, the solvent itself is considered to have a negative effect. The solvents used in the experiments were all hydrophilic, such as methanol, acetone, and dioxane. The average molecular weight of the grafted PMMA differed in each solvent, indicating a different characteristic effect of solvent on the growing grafted polymer radicals. The presence of ferric ion as a sensitizer stimulated further the contributions of the sample swelling and the organic solvents to the copolymerization reaction. A similar effect was observed for styrene as for MMA, but not for acrylic acid and methacrylic acid.     

Photo-induced graft copolymerization of methyl methacrylate on cellulose

Graft copolymerization initiated by ultraviolet light irradiation at 40°C in a hard glass vessel under nitrogen was examined. The graft copolymerization was observed to occur easily after some induction period without any use of photosensitizer, though it was found the per cent grafting and the grafting efficiency were markedly affected by the quantities of cellulose and monomer. In the system without cellulose, homopolymerization of methyl methacrylate hardly took place, but the use of cellulose caused the formation of homopolymer too, and a grafting efficiency in the range of 60–80% generally resulted. Ferric chloride or sodium anthraquinone-2,7-disulfonate (AQ) acted on the polymerization reaction as photosensitizers to reduce its induction period. Though ferric chloride acted to develop both the per cent grafting and the number of grafts, not the same effects were observed with AQ. Oxalic acid, which was employed with the object of eliminating very small amount of metals contained in cellulose, was found to act favorably in the formation of grafts, much like ferric chloride.     

Photo-induced cellulose radicals capable of initiating graft copolymerization

The decay behavior of cellulose radicals produced by photo-irradiation at room temperature and the characteristics of photo-irradiated cellulose samples to initiate graft copolymerization of methyl methacrylate (MMA) were investigated. ESR spectra of such untreated, swollen, oximated, and ferric ion-sensitized samples irradiated at room temperature were constructed mainly of a single absorption line with a line width of 20 to 22 gauss and a g value of 2.003, and it is surely conceivable that the radicals showing a singlet spectrum should agree with those of alkoxy end produced at either the C₁ or C₄ position of the glucose unit by the scission of glucosidic bonds. The decay of radicals was accelerated by contact of various solvents with the samples, the activity decreasing in the order, water ≈ methanol ? acetone > dioxane. On the other hand, the decay of radicals by vinyl monomers became smaller in the order, methacrylic acid > MMA ≈ styrene. Graft copolymerization of MMA by a photo-irradiated sample was effectively initiated with the use of a certain amount of water or methanol, but not with acetone and dioxane. As no initiation can occur with the unirradiated sample, it is concluded that the initiation of graft copolymerization on the photo-irradiated sample is attributable to cellulose radicals showing a singlet spectrum which are formed in photo-irradiation at room temperature.     

ESR Studies of A(1u) and A(2u) Oxoiron(IV) Porphyrin pi-Cation Radical Complexes. Spin Coupling between Ferryl Iron and A(1u)/A(2u) Orbitals

This study shows the ESR spectra of oxoiron(IV) porphyrin pi-cation radicals of 1-8 in dichloromethane-methanol (5:1) mixture. We reported in a previous paper that oxoiron(IV) porphyrin pi-cation radicals of 1-4 are in an a(1u) radical state while those of 5-8 are in an a(2u) radical. The ESR spectra (g( perpendicular)(eff) approximately 3.1 and g( parallel)(eff) approximately 2.0) for the a(1u) radical complexes, 1-4, appear quite different from those reported previously for the oxoiron(IV) porphyrin pi-cation radical of 5 (g(y) = 4.5, g(x) = 3.6, and g(z) = 1.99). The unique ESR spectra of the a(1u) radical complexes rather resemble those of compound I from Micrococcus lysodeikticus catalase (CAT) and ascorbate peroxidase (ASP). This is the first examples to mimic the ESR spectra of compound I in the enzymes. From spectral analysis based on a spin Hamiltonian containing an exchange interaction, the ESR spectra of 1-4 can be explained as a moderate ferromagnetic state (J/D approximately 0.3) between ferryl S = 1 and the porphyrin pi-cation radical S' = (1)/(2). The magnitudes of zero-field splitting (D) for ferryl iron and isotropic J value, estimated from the temperature-dependence of the half-saturation power of the ESR signals, are approximately 28 and approximately +8 cm(-1), respectively. A change in the electronegativity of the beta-pyrrole substituent hardly changes the ESR spectral feature while that of the meso-substituent slightly does owing to the change in the E/D value. On the basis of the present ESR results, we propose the a(1u) radical state for compound I of CAT and ASP.     

C13-Methylation of methyl pheophorbide a and stereoselective preparation of methyl (13R)-methylpyropheophorbide a

The (13²R)-methoxycarbonyl group of methyl pheophorbide a, one of the chlorophyll-a derivatives, was converted to a methyl group through methylation at the C13² position followed by removal of the methoxycarbonyl group. The methylation of the C13² carboanion gave a 4:1 mixture of methyl 13²-methyl-pheophorbide a and its 13²-epimer. The successive pyrolysis of the major methylated product afforded methyl (13²R)-methyl-pyropheophorbide a with a small amount of its (13²S)-epimer. The substitution effects at the C13² position including stereochemistry were discussed on the basis of 1D/2D NMR, UV–vis absorption, and circular dichroism spectroscopic analyses as well as molecular modeling simulation.     

Systematic Tuning and Switching of Neutral and Ionic Phases in a Donor–Acceptor Chain Compound by Doping with Less‐Active Donors and by Pressure Application

The temperature‐induced stepwise neutral–ionic (N–I) phase transition in the covalently bonded donor–acceptor chain compound [Ru₂(2,3,5,6‐F₄PhCO₂)₄DMDCNQI] ? 2(p‐xylene) (2,3,5,6‐F₄PhCO₂^?=2,3,5,6‐tetrafluorobenzoate; DMDCNQI=2,5‐dimethyl‐N,N′‐dicyanoquinodiimine) was systematically tuned over a wide temperature range using two techniques: 1) A chemical technique based on doping with a less‐active donor unit [Ru₂^II,II(F₅PhCO₂)₄] (F₅PhCO₂^?=pentafluorobenzoate), thereby providing an isostructural doped series [{Ru₂^II,II(2,3,5,6‐F₄PhCO₂)₄}_1?x{Ru₂^II,II(F₅PhCO₂)₄}_xDMDCNQI] ? 2(p‐xylene), with x=0.06, 0.10, 0.21, and 0.24; and 2) a physical technique, which was the application of hydrostatic pressure to the doped compounds. The stepwise N–I transition observed in the original compound was systematically varied in terms of the viewpoints of both transition temperature and transition features (stepwise or monotonic) dependent on the amount of dopants x. Application of pressure efficiently tuned the N–I transitions, with the oxidation phases being dramatically modified by applying only weak pressure up to 4 kbar. Even in cases that led to N–I transitions in small domains of the chains at ambient pressure, the application of pressure caused an expansion of the domains that enabled N–I transitions, finally leading to a complete change in the oxidation state of the chains, from neutral to ionic, accompanied by a change from a paramagnetic state to a ferrimagnetically ordered state.     

Magnetism of spin polymers prepared by the oxidative polyrecombination of captodative compounds

Magnetism of hydroanilino ladder polymer and indigo polymer which were prepared by the oxidative polyrecombination of captodative substituted methane and indoxyl, respectively, was studied by ESR spectroscopy and magnetic susceptibility measurement. It was found that both spin polymers contained domains with high spin state in their structures and their spins were much more ordered with decreasing temperature.