Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

Indirect bounds on heavy scalar masses of the two-Higgs-doublet model in light of recent Higgs boson searches

We study an upper bound on masses of additional scalar bosons from the electroweak precision data and theoretical constraints such as perturbative unitarity and vacuum stability in the two-Higgs-doublet model taking account of recent Higgs boson search results. If the mass of the Standard-Model-like Higgs boson is rather heavy and is outside the allowed region by the electroweak precision data, such a discrepancy should be compensated by contributions from the additional scalar bosons. We show the upper bound on masses of the additional scalar bosons to be about 2 (1) TeV for the mass of the Standard-Model-like Higgs boson to be 240 (500) GeV.     

Effect of solute atoms on grain boundary sliding in magnesium alloys

The effect of solid-solution alloying on grain boundary sliding (GBS) was investigated using pure magnesium and six kinds of Mg–X (X?=?Ag, Al, Li, Pb, Y and Zn) dilute binary solid solutions with an average grain size of 10?µm. A sharp increase in damping capacity caused by GBS was observed above a certain temperature. The temperature at which a sharp increase in damping capacity occurred depended on the alloying element. The addition of Y and Ag markedly increased the onset temperature (more than 100?K) for a sharp increase in damping capacity, whereas the addition of Zn, Al and Li slightly increased the onset temperature (less than 50?K) as compared with that for pure magnesium. Tensile tests at a temperature of 423?K revealed that the higher the onset temperature, the lower the strain rate sensitivity of the flow stress. It is suggested that the former elements (Y and Ag) are more effective in suppressing GBS in magnesium alloys than the latter ones (Zn, Al and Li). The suppression of GBS was associated with low grain boundary energy, and the extent to which the energy is reduced depended on the alloying element. It was suggested that the change in the lattice parameter (the so-called c/a ratio) affects the grain boundary energy, and thus, the occurrence of GBS.     

Relationship between apparent diffusion coefficient and signal intensity in endometrial and other pelvic cysts

We evaluated whether apparent diffusion coefficient (ADC) value is more useful than signal intensity for differentiating endometrial cysts from other pelvic cysts. In an in vitro study, signal intensity and diffusion coefficients were measured in whole blood phantoms in which blood oxidation was gradually increased and concentration subsequently diluted. Although both signal intensity and diffusion value were largely affected by blood concentration, diffusion value was almost independent of blood oxidation and red blood cell lysis-related diminution of magnetic nonhomogeneity, both factors greatly affecting signal intensity on T1- and T2-weighted images. In an in vivo study, differentiation between endometrial and other pelvic cysts was attempted by means of ADC values and signal ratios of cysts to muscles on T1- and T2-weighted images (T1- and T2-ratios). Endometrial cysts tended to show lower T2-ratios, higher T1-ratios, and lower ADC values than other pelvic cysts (p < 0.001). However, ADC values were not correlated with T1- and T2-ratios (p < /0.15/). The ability of ADC value to discriminate between these two groups (discriminant rate, 91.4%) was higher than that of T2-ratio (71.4%) or T1-ratio (88.6%). If combined, ADC and T1-ratio (or T2-ratio) showed higher discriminant rate (94.3%) than the combination of T1- and T2 ratios (88.6%). ADC value might be useful for evaluating the blood concentration of a cystic lesion, because diffusion value is more closely related to blood concentration and almost independent of blood oxidation and red blood cell lysis that largely affect signal intensity.     

Effect of melt viscosity and surface tension of polymers on the percolation threshold of conductive-particle-filled polymeric composites

The electrical conductivities of carbon-black-filled low-density polyethylene (LDPE), poly(methyl methacrylate) (PMMA), and poly(vinyl chloride)-vinyl acetate (PVC/ VAc) copolymer were measured as functions of carbon content and melt viscosity of the matrix at the temperatures at which the composites were prepared. Sharp breaks in the relationship between the carbon filler content and the conductivity of composites were observed in all specimens at some content of the carbon filler. The conductivity jumps as much as 10 orders of magnitude at the break point. This phenomenon has been known as the “percolation threshold”. The critical carbon content corresponding to the break point     

Fourier domain optical coherence tomography using optical demultiplexers imaging at 60,000,000 lines/s

We describe high-speed Fourier domain optical coherence tomography (OCT) using optical demultiplexers (ODs) for spectral dispersion. The OD enables separation of a narrow spectral band of 14 GHz (0.11 nm) from a broadband incident light at 256 different frequencies in 25.0 GHz intervals centered at 192.2 THz (1559.8 nm). OCT imaging of 60,000,000 axial scans per second was achieved through parallel signal acquisition using 256 balanced photoreceivers to simultaneously detect all the output signals from the ODs in a Fourier domain OCT system. OCT imaging at a 16 kHz frame rate, 1100 A-lines per frame, 3 mm depth range, and 23 microm resolution was demonstrated using a resonant scanner for lateral scanning.     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Generators of Spn(V) over a quasi semilocal semihereditary ring

This paper is devoted to determine the minimal length of expressions of an isometry in a symplectic group Sp_n(V) by a product of transvections under the assumption that V is an n-ary nonsingular alternating space over a quasi semilocal semihereditary ring with 2 as a unit.     

Simultaneous observation of CO isotopomer absorption by broadband difference-frequency generation using a direct-bonded quasi-phase-matched LiNbO3 waveguide

Rovibration absorption lines both of 12CO and 13CO are observed simultaneously with the output of a 2 microm broadband difference frequency generated in a direct-bonded quasi-phase-matched LiNbO3 waveguide, which is a 50 mm device with a single quasi-phase-matching period that is operated at a constant temperature. The wavelength conversion efficiency and the difference-frequency generation bandwidth reach 100%/W and 100 nm, respectively. The idler output bandwidth in the 2 microm region is obtained by group-velocity matching or phase-mismatch minimization when a 0.94 microm pump laser diode and a 1.55 microm tunable signal source are used.