Polymeric Electron Carriers

Polymers containing 1,4-dihydronicotinamide (P-NAH) alloxan (P-A), and viologen (P-V²⁺) moieties were synthesized and characterized. P-NAH reduced various organic substances such as lipoic acid, alloxan, and viologens and also immobilized quinone mediated by alloxan. P-A was reduced to the polymer-bearing alloxan radical and the dialuric acid structure without crosslinks by one- and two-electron reduction, respectively, and P-A also mediated the redox reaction occurring between aqueous and organic (water-immiscible) layers. P-V²⁺ was converted to the stable viologen radical reversibly by one-electron reduction. Electric potentials and currents on photo-reduction of P-V²⁺ and catalytic behavior of P-V²⁺ in the reduction of carbonyl compounds were examined.     

Determination of oil–water partition coefficients of polar compounds: silicone membrane equilibrator vs. SPME passive sampler

Experimental determination of oil-water partition coefficients often poses difficulties associated with emulsion formation. The aim of this work was to find an appropriate technique for determination of oil–water partition coefficients of polar, nonvolatile compounds. Two different methods were tested. The first method used a “silicone membrane equilibrator.” For the second method, solid-phase microextraction (SPME) fibers with a polyacrylate (PA) coating were used as a passive sampler. With both methods, oil–water partition coefficients for 14 compounds with polar functional groups were determined at 37 °C with good repeatability (standard deviation 0.11 log units or lower). The partition coefficients determined with the silicone membrane equilibrator method ranged from 0.50 to 3.49 log units. The oil–water partition coefficients obtained with the PA-SPME passive sampling approach were significantly higher than those obtained with the silicone membrane equilibrator method for nine of 14 compounds. The differences were up to 0.39 log units (i.e., a factor of 2.5). Additional experiments suggested that this difference occurred because the sorption properties of the PA fibers used were influenced by the surrounding phase, e.g., through swelling of the polymer phase. Therefore, the SPME passive sampling method using PA fibers seems to be less reliable, whereas the silicone membrane equilibrator method was found to be a convenient technique for the determination of oil–water partitioning.     

A Novel Synthesis of 1-Isochromanols via Hetero Diels-Alder Reaction of Carbonyl Compounds with 1-Trimethylsilyloxy-benzocyclobutene as a Precursor of α-Oxy-o-Quinodimethane Under Mild Condition

Reaction of 1-trimethylsilyloxybenzocyclobutene(1) with carbonyl compounds catalyzed by tris(dimethylamino)sulfur (trimethylsilyl)difluoride (TASF) at room temperature gave 1-isochromanol derivatives as corresponding hetero Diels-Alder adducts in good yields.     

Preparation of nanoscale cellulose materials with different morphologies by mechanical treatments and their characterization

Rod-like cellulose nanowhiskers and spherical cellulose nanoparticles were prepared from wood-pulp-derived cellulose powder by mechanical refining processes such as high-pressure homogenization (HPH) and ball-milling (BM). The nanowhiskers obtained by the HPH method were found to be 200–500 nm long and 11–16 nm wide. The diameters of the nanoparticles were in the range 40–200 nm, depending on the BM time, and were reduced to 25–50 nm after extra HPH. By adjusting the BM time, cellulose nanoparticles having different polymorphs with similar morphologies were prepared. The X-ray diffraction patterns revealed the recrystallization of cellulose I (1 h of BM time) or cellulose II (4–8 h of BM time) in ball-milled nanoparticles after water washing and solvent exchange treatments. The nanowhisker widths derived from the specific surface areas (SSA) by adsorption methods such as Congo red dye, nitrogen, and water vapor, sorptions were in agreement with those obtained from transmission electron microscopy and atomic force microscopy images. Similar SSA values were obtained for micro- and nano-scale cellulose materials using water vapor adsorption methods, and the SSAs of nanoparticles obtained by different adsorption methods are also discussed.     

Enhanced CO2 adsorptivity of SWCNT by polycyclic aromatic hydrocarbon intercalation

We tuned the electronic properties of single wall carbon nanotube (SWCNT) with intercalation of naphthalene derivatives (NDs) having different electron donor or acceptor property in the SWCNT bundles. Characterization of the adsorbed SWCNT with Raman spectroscopy and electrical conductivity measurement clearly indicate the charge transfer interaction of ND molecules with SWCNT. Also X-ray diffraction supports the intercalation of ND molecules in the interstitial spaces and groove sites of SWCNT bundle. Intercalation of ND molecules enhances remarkably the CO₂ adsorptivity, which can be ascribed to the key importance of the interaction of the quadrupole moment of CO₂ with the local electrical field on the SWCNT induced by the charge transfer interaction.     

一种经氟化和热处理在双壁碳纳米管上生成缺陷的方法(英文)

Nanoscale defects in the outer tube to preserve the electrical and optical features of the inner tube can be engineered to exploit the intrinsic properties of double walled carbon nanotubes (DWCNTs) for various promising applications. We demonstrated a selective way to make defects in the outer tube by the fluorination of DWCNTs followed by the thermal detachment of the F atoms at 1000 °C in argon. Fluorinated DWCNTs with different amounts of F atoms were prepared by reacting with fluorine gas at 25, 200, and 400 °C that gave the stoichiometry of CF0.20, CF0.30, and CF0.43, respectively. At the three different temperatures used, we observed preservation of the coaxial morphology in the fluorinated DWCNTs. For the DWCNTs fluorinated at 25 and 200 °C, the strong radial breathing modes (RBMs) of the inner tube and weakened RBMs of the outer tube indicated selective fluorine attachment onto the outer tube. However, the disappearance of the RBMs in the Raman spectrum of the DWCNTs fluorinated at 400 °C showed the introduction of F atoms onto both inner and outer tubes. There was no significant change in the morphology and optical properties when the DWCNTs fluorinated at 25 and 200 °C were thermally treated at 1000 °C in argon. However, in the case of the DWCNTs fluorinated at 400 °C, the recovery of strong RBMs from the inner tube and weakened RBMs from the outer tube indicated the selective introduction of substantial defects on the outer tube while preserving the original tubular shape. The thermal detachment of F atoms from fluorinated DWCNTs is an efficient way to make highly defective outer tubes for preserving the electrical conduction and optical activity of the inner tubes.     

Structural Insights into Rice Straw Pretreated by Hot-Compressed Water in Relation to Enzymatic Hydrolysis

Pretreatment-induced structural alteration is critical in influencing the rate and extent of enzymatic saccharification of lignocellulosic biomass. The present work has investigated structural features of rice straw pretreated by hot-compressed water (HCW) from 140 to 240 °C for 10 or 30 min and enzymatic hydrolysis profiles of pretreated rice straw. Compositional profiles of pretreated rice straw were examined to offer the basis for structural changes. The wide-angle X-ray diffraction analysis revealed possible modification in crystalline microstructure of cellulose and the severity-dependent variation of crystallinity. The specific surface area (SSA) of pretreated samples was able to achieve more than 10-fold of that of the raw material and was in linear relationship with the removal of acetyl groups and xylan. The glucose yield by enzymatic hydrolysis of pretreated materials correlated linearly with the SSA increase and the dissolution of acetyl and xylan. A quantitatively intrinsic relationship was suggested to exist between enzymatic hydrolysis and the extraction of hemicellulose components in hydrothermally treated rice straw, and SSA was considered one important structural parameter signaling the efficiency of enzymatic digestibility in HCW-treated materials in which hemicellulose removal and lignin redistribution happened.     

Dehydration‐fragmentation mechanism of cathinones and their metabolites in ESI‐CID

Various cathinone‐derived designer drugs (CATs) have recently appeared on the drug market. This study examined the mechanism for the generation of dehydrated ions for CATs during electrospray ionization collision‐induced dissociation (ESI‐CID). The generation mechanism of dehydrated ions is dependent on the amine classification in the cathinone skeleton, which is used in the identification of CATs. The two hydrogen atoms eliminated during the dehydration of cathinone (primary amine) and methcathinone (secondary amine) were determined, and the reaction mechanism was elucidated through the deuterium labeling experiments. The hydrogen atom bonded to the amine nitrogen was eliminated with the proton added during ESI, in both of the tested compounds. This provided evidence that CATs with tertiary amine structures (such as dimethylcathinone and α‐pyrrolidinophenones [α‐PPs]) do not undergo dehydration. However, it was shown that the two major tertiary amine metabolites (1‐OH and 2″‐oxo) of CATs generate dehydrated ions in ESI‐CID. The dehydration mechanisms of the metabolites of α‐pyrrolidinobutiophenone (α‐PBP) belongs to α‐PPs were also investigated. Stable‐isotope labeling showed the dehydration of the 1‐OH metabolite following a simple mechanism where the hydroxy group was eliminated together with the proton added during ESI. In contrast, the dehydration mechanism of the 2″‐oxo metabolite involved hydrogen atoms in three or more locations along with the carbonyl group oxygen, indicating that dehydration occurred via multiple mechanisms likely including the rearrangement reaction of hydrogen atoms. These findings presented herein indicate that the dehydrated ions in ESI‐CID can be used for the structural identification of CATs.     

Photopolyaddition of dithiols to bis(alkoxyallene)s

Polyadditions of 1,4-benzenedithiol (BDT) to bis(alkoxyallene)s, such as 1,4-bis(allenyloxy)xylene (3) and 1,4-bis(allenyloxy) benzene (4) , were carried out in benzene at 25°C by irradiation with a high pressure mercury lamp. Thiol groups were added to the terminal double bonds of the allenyloxy groups selectively to afford polymers containing reactive carbon–carbon double bonds in the main chain, similar to the radical polyadditions using azobis(isobutyronitrile) (AIBN). The molecular weight of the polymer obtained from BDT and 3 was 10 times higher than that of the polymer produced in the radical polyaddition with AIBN; whereas the molecular weight of the polymer from BDT and 4 was similar to that in the radical polyaddition, probably because of poor solubility of 4 and the polymer toward benzene. The geometrical structure of carbon–carbon double bonds in the polymer isomerized from an E to Z structure with reaction time by virtue of both the addition elimination of thiyl radical to the double bonds and the UV irradiation. © 1996 John Wiley & Sons, Inc.