Effect of solute atoms on grain boundary sliding in magnesium alloys

The effect of solid-solution alloying on grain boundary sliding (GBS) was investigated using pure magnesium and six kinds of Mg–X (X?=?Ag, Al, Li, Pb, Y and Zn) dilute binary solid solutions with an average grain size of 10?µm. A sharp increase in damping capacity caused by GBS was observed above a certain temperature. The temperature at which a sharp increase in damping capacity occurred depended on the alloying element. The addition of Y and Ag markedly increased the onset temperature (more than 100?K) for a sharp increase in damping capacity, whereas the addition of Zn, Al and Li slightly increased the onset temperature (less than 50?K) as compared with that for pure magnesium. Tensile tests at a temperature of 423?K revealed that the higher the onset temperature, the lower the strain rate sensitivity of the flow stress. It is suggested that the former elements (Y and Ag) are more effective in suppressing GBS in magnesium alloys than the latter ones (Zn, Al and Li). The suppression of GBS was associated with low grain boundary energy, and the extent to which the energy is reduced depended on the alloying element. It was suggested that the change in the lattice parameter (the so-called c/a ratio) affects the grain boundary energy, and thus, the occurrence of GBS.     

Effect of solute atoms on fracture toughness in dilute magnesium alloys

The effect of alloying elements on the toughness and the fracture behaviour was investigated on seven kinds of Mg-0.3?at.% X (X?=?Ag, Al, Ca, Pb, Sn, Y and Zn) alloys with a grain size of 3–5?μm. The fracture toughness and fracture behaviour in magnesium alloys were closely related to the segregation energy. The Mg–Al and –Zn alloys that had small segregation energy showed high toughness and ductile fracture in most regions, while the Mg–Ca alloy with large segregation energy exhibited low toughness and intergranular fracture. These different tendencies resulted from solute segregation at grain boundaries (GBs). The change in the lattice parameter ratio was the influential material parameter regardless of whether the GB embrittlement was for enhancement or suppression.     

Significant Difference in Semiconducting Properties of Isomeric All‐Acceptor Polymers Synthesized via Direct Arylation Polycondensation

The direct arylation polycondensation (DArP) appeared as an efficient method for producing semiconducting polymers but often requires acceptor monomers with orienting or activating groups for the reactive carbon‐hydrogen (C‐H) bonds, which limits the choice of acceptor units. In this study, we describe a DArP for producing high‐molecular‐weight all‐acceptor polymers composed of the acceptor monomers without any orienting or activating groups via a modified method using Pd/Cu co‐catalysts. We thus obtained two isomeric all‐acceptor polymers, P1 and P2, which have the same backbone and side‐chains but different positions of the nitrogen atoms in the thiazole units. This subtle change significantly influences their optoelectronic, molecular packing, and charge‐transport properties. P2 with a greater backbone torsion has favorable edge‐on orientations and a high electron mobility μ_e of 2.55 cm² V^?1 s^?1. Moreover, P2‐based transistors show an excellent shelf‐storage stability in air even after the storage for 1 month.     

Photochemical reaction of silyl-substituted 1,4-disila(dewar-benzene) with isocyanide and phenylacetylene

The irradiation of silyl-substituted 1,4-disila(Dewar-benzene) 1 with light of wavelength λ > 320 nm in the presence of 2,6-dimethylphenyl-isocyanide or phenylacetylene produced 1,4-bis(di-tert-butylmethylsilyl)-2,3,5,6-tetraethyl-7-(2,6-dime-thylphenylimino)-1,4-disilabicyclo[2.2.1]hepta-2,5-diene 5 or 1,4-bis(di-tert-butylmethylsilyl)-2,3,5,6-tetraethyl-1-(2-phenylethynyl)-1,4-disilacyclohexa-2,5-diene 6 , respectively. The molecular structures of 5 and 6 were determined by spectroscopic data and X-ray crystallography. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:87–92, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20411     

Biosynthesis of Indole Diterpene Lolitrems: Radical-Induced Cyclization of an Epoxyalcohol Affording a Characteristic Lolitremane Skeleton

Lolitrems are tremorgenic indole diterpenes that exhibit a unique 5/6 bicyclic system of the indole moiety. Although genetic analysis has indicated that the prenyltransferase LtmE and the cytochrome P450 LtmJ are involved in the construction of this unique structure, the detailed mechanism remains to be elucidated. Herein, we report the reconstitution of the biosynthetic pathway for lolitrems employing a recently established genome-editing technique for the expression host Aspergillus oryzae. Heterologous expression and bioconversion of the various intermediates revealed that LtmJ catalyzes multistep oxidation to furnish the lolitrem core. We also isolated the key reaction intermediate with an epoxyalcohol moiety. This observation allowed us to establish the mechanism of radical-induced cyclization, which was firmly supported by density functional theory calculations and a model experiment with a synthetic analogue.     

Improvement in semipermeable membrane performance of wholly aromatic polyamide through an additive processing strategy

A new concept for the method to provide semipermeability in ultrathin and single‐component wholly aromatic polyamide membranes has been developed for the first time. It was found that water molecules could permeate through the membrane prepared not from polyamides containing flexible ether, bulky binaphthyl, or fluorene rigid units, but one with carboxylic acid groups under a reverse osmosis mode. However, the enhancement of water transport properties by introducing the hydrophilic group of polyamide was not substantial. Therefore, polyamide membranes were prepared from the solution containing aqueous additives in order to weaken hydrogen bonds between polymer chains and thereby to suppress the aggregation of the polymer chains. As a result, water flux was dramatically improved with slightly improved NaCl rejection. Our analyses based on attenuated total reflectance Fourier transform infrared spectroscopy and solid‐state carbon polarization and magic angle spinning nuclear magnetic resonance (¹³C CPMAS NMR) spectroscopy confirmed that the aggregation of polymer chains due to the hydrogen bonds among the amide linkages was suppressed by the co‐ordination of the aqueous additives to the amide linkage. The state of water in the membranes analyzed by differential scanning calorimetry also supported the formation of pores. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1275–1281     

Novel indoline dye tetrabutylammonium carboxylates attached with a methyl group on the cyclopentane ring for dye-sensitized solar cells

(2R,3aR,8bR)- and (2S,3aS,8bS)-2-Methyl indoline dye tetrabutylammonium carboxylates exhibited the highest conversion efficiency among four regio and stereo isomers. These indoline dyes also showed higher conversion efficiency than DN350.