Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Emission spectrographic determination of trace elements in atmospheric particulate matter

Air containing particulate material was passed continuously for one month through a low-volume air sampler equipped with a cyclone to exclude particulates greater than 10 μm in diameter. The samples and filters were ashed in a low-temperature plasma and, after addition of In₂O₃ support, palladium internal standard and graphite buffer, the ashes were analyzed by a.c. are emission spectrometry. Standard samples were prepared from a commercial standard containing 49 elements. The procedure allows the determination of 14 trace metals (Ag, Al, Cr, Cu, Fe, Ga, Mn, Mo, Ni, Pb, Sn, Ti, V, Zn) with relative standard deviations of 1.4–15.1%. The procedure has been applied successfully to monthly determinations of the average atmospheric concentrations of these elements in Kobe City for the past three years.     

Synthesis and properties of polymeric azine and thiazine dyes

Some polymeric azine or thiazine dyes were prepared by radical polymerization of dye monomers or by polymer reactions between dyes and suitable prepolymers, and their photoredox reactivities were studied. The thionine polymers containing labile ? OH groups exhibited photochromism and thermochromism, which were extremely sensitive to the moisture content of the polymer film. The reversibility of the photochromism and thermochromism increased with the water content in the film. The water-soluble polymeric dyes were photobleached under the influence of suitable reducing agents. The degree of photobleaching was smaller than for the monomeric systems except for the dye polymers containing ? OH groups, probably because of the large steric hindrance of the polymers.     

Synthesis and reactivities of 10-S-3 trithiadiazapentalene derivatives

1,3-Bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidinethiones 3a-f reacted with bromine to give trithiadiazapentalene derivatives 5a-f , bearing the exocyclic C-N double bonds, in moderate yields. The molecular structure of 5b was elucidated by the X-ray crystallographic analysis. The treatment of 5b-f with hydrochloric acid gave the ring-opening products, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazo-lidinones 9b-f , accompanied by the production of elemental sulfur. Reduction of 5b , 5d , and 5e with sodium borohydride gave the ring-opening compounds, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidines 13b , 13d , and 13e respectively.     

Palladium-catalyzed cycloheptatriene formation by [3+2+2] cocyclization of 2-substituted allylic alcohols and alkynes

Cycloheptatrienes were obtained by the reaction of 2-substituted allylic alcohols with alkynes in the presence of catalytic amounts of palladium complexes and p-toluenesulfonic acid.     

Dialumenes – aryl vs. silyl stabilisation for small molecule activation and catalysis

Main group multiple bonds have proven their ability to act as transition metal mimics in the last few decades. However, catalytic application of these species is still in its infancy. Herein we report the second neutral NHC-stabilised dialumene species by use of a supporting aryl ligand (3). Different to the trans-planar silyl-substituted dialumene (3Si), compound 3 features a trans-bent and twisted geometry. The differences between the two dialumenes are explored computationally (using B3LYP-D3/6-311G(d)) as well as experimentally. A high influence of the ligand''s steric demand on the structural motif is revealed, giving rise to enhanced reactivity of 3 enabled by a higher flexibility in addition to different polarisation of the aluminium centres. As such, facile activation of dihydrogen is now achievable. The influence of ligand choice is further implicated in two different catalytic reactions; not only is the aryl-stabilised dialumene more catalytically active but the resulting product distributions also differ, thus indicating the likelihood of alternate mechanisms simply through a change of supporting ligand.

Ligand controlled reactivity: a trans-bent and twisted geometry enables dihydrogen activation and enhanced catalytic activity for NHC-stabilised dialumenes.     

A potentiometric microbial sensor based on immobilized escherichia coli for glutamic acid

The sensor consists of immobilized E. coli (which contains glutamate decarboxylase) and a carbon dioxide gas-sensor. Continuous introduction of sample solution into a flow system incorporating the sensor gives a potential which increases until a steady state is reached after 5 min. Measurements can also be made with only a 1- or 3-min introduction period with little loss of sensitivity. Calibration plots of mV measurements vs. logarithmic glutamic acid concentration are linear in the range 100–800 mg l^-1. The sensor is highly selective, stable and reproducible. It has been applied to the determination of glutamic acid in fermentation broths.     

Proof of the generalized expressions for the number of perfect matchings of polycube graphs

The number of perfect rnatchings for the linear 2 × 2 ×n cubic lattice was analytically derived by diagonalizing the skew—symmetric 4n × 4n determinant, whose non—zero off—diagonal elements are either ±1 or ±i (pure imaginary number). The basic formulation invoking the matrix manipulation follows that of Kasteleyn, but the result obtained in this paper is the first example of the analytical solution for a special case of the three-dimensional Ising model.received by the Publisher 20 September 1989     

Pre-concentration of traces of tin by coprecipitation with yttrium hydroxide for electrothermal atomisation atomic absorption spectrometry

Summary Trace amounts of tin were concentrated by coprecipitation and determined by electrothermal atomisation atomic absorption spectrometry. Yttrium hydroxide coprecipitated quantitatively 0.1–3 g of tin from 50–500 ml of sample solution at pH 9.5–11.2. The atomic absorbance of tin increased about twice by using an impregnated graphite tube with yttrium. The impregnated graphite tube, furthermore, improved the reproducibility of the measurement of tin. A linear calibration graph was obtained in the range of 0.004–0.12 g/ml of tin. Twenty-three foreign ions did not interfere seriously. The method was applicable to the determination of tin in zinc metal.