Structural characterization and ferromagnetic behavior of Fe-doped TiO2 powder by high-energy ball milling

Fe-doped TiO₂ powder was prepared by high-energy ball milling, using TiO₂ Degussa P-25 and α-Fe powders as the starting materials. The structure and magnetic properties of the Fe-doped TiO₂ powder were studied by X-ray diffraction, ⁵⁷Fe Mossbauer spectroscopy and vibrating sample magnetometer. The Reitveld refinement of XRD revealed that ball milling not only triggered incorporation of Fe in TiO₂ lattice but also induced the phase transformation from anatase to rutile in TiO₂ and consequently the milled Fe-doped TiO₂ powder contained only rutile.⁵⁷Fe Mössbauer effect measure showed that Fe atoms existed in Fe²⁺ and Fe³⁺ state, which were assigned to the solid solution Fe_xTi_1−xO₂. The magnetization measurements indicated that the milled Fe-doped TiO₂ powder was ferromagnetic above room temperature. The ferromagnetism in our milled Fe-doped TiO₂ powder seemingly does not come from Fe and iron oxides particles/clusters but from the Fe-doped TiO₂ powder matrices.     

双原子分子离子SiC-激发态A2Ⅱ的势能函数的变分研究

根据能量变分的思想,将双原子分子离子XY 的新解析势能函数ECMI势和关于离子XY 的能量自洽法(Energy-consistent-method for ion, ECMI)推广到双原子分子离子XY-的势能函数研究之中,具体研究了双原子分子离子SiC-激发态A2∏的势能函数,并与将中性双原子分子的势能函数如Morse势和Huxley-Murrrell-Sorbie (HMS)势直接用于双原子分子离子XY-的结果和ab initio计算结果进行了比较.结果表明,ECMI势和ECMI方法对双原子分子离子XY-的势能函数研究同样是成功的,在重要的渐近区和离解区优于中性势能函数,与精确的ab initio结果一致.     

Preparation and Mechanical Properties of Fe3Al Nanostructured Intermetallics

Nanostructured Fe₃Al intermetallic compounds were produced by using hydrogen arc plasma method. The transmission electron microscopy experiments showed that the average particle size of the as-synthesized was about 40-nm. The change in hardness of Fe₃Al nanostructured intermetallic compounds with annealing temperatures was observed and evaluated.     

A Lower Bound for {a+b:aA, bB, and P(a,b)≠0}

Let A and B be two finite subsets of a field . In this paper, we provide a non-trivial lower bound for {a+b:aA, bB, and P(a,b)≠0} where P(x,y) [x,y].     

基于优化探测窗口的光斑质心探测方法

哈特曼-夏克波前传感器进行波前探测时，用子孔径光斑强度的一阶矩来计算光斑质心位置，子孔径窗口作为探测窗口，但探测时子孔径窗口内噪声对一阶矩有很大的影响，会使质心探测精度产生很大的误差。因此在计算质心位置时探测窗口的选取对探测精度有重要影响，必须选取合适的探测窗口来提高光斑质心探测精度。为此，在传统算法的基础上提出优化探测窗口的方法来提高质心探测精度,仿真和实验结果表明新方法提高了质心探测的精度，未经处理的高噪声恢复波前的波前残差峰谷值是2.851 4λ，均方根值是0.606 3λ，优化探测窗口后波前残差的峰谷值是1.636 2 λ，均方根值是0.367 1 λ，重构误差减小了40％。证明了算法的可行性和稳定性。     

无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

BEPCⅡ高频发射机和环流器的调整和测试

北京正负电子对撞机升级改造工程(BEPCⅡ)将采用的频率500MHz、输出功率250kW的高频发射机和环流器已安装、调整、测试和验收完毕,这是国内建立的第一套500MHz/250kW发射机系统.本文将详细介绍机器的调测试的原理和各项测量内容及结果, 并比较设计指标和要求,来阐述此发射机的实际技术指标和测试性能.     

Demonstration of Soliton Solutions of DNLS Equation by Liouville Theorem

In the inverse scattering transform (IST), the reflectionless Jost solutions are combined by their analytic properties in the complex spectrum parameter plane, and then can be shown to satisfy the two Lax equations indeed by Liouville theorem. So the corresponding soliton solutions certainly satisfy the nonlinear equation by compatibility condition. Especially the multi-soliton solutions of DNLS equation can be demonstrated in this way. PACS Numbers: 05.45.Yv, 02.30.-f, 11.10.Ef     

高强混凝土弯压极限应变试验研究与计算

由于混凝土材料理化特性的差异,高强混凝土的弯压极限应变明显地小于普通混凝土,依据试验结果分析了高强混凝土的弯压极限应变变化规律,并给出了它的计算公式.