离子印迹磁固相萃取-石墨炉原子吸收光谱法联用分析环境水样中痕量Ni(Ⅱ)

本文通过乳液聚合法制备磁性离子印迹材料Fe3O4@SiO2@IIM,并运用多种技术手段对其进行了表征。所制备的Fe3O4@SiO2@IIM磁材料颗粒较均一,粒径约为20nm,单分散性好,具有超顺磁性(饱和磁化强度为8.66emu·g-1)。基于此,建立了离子印迹磁固相萃取(IIMSPE)-石墨炉原子吸收光谱法(GFAAS)联用技术分析环境水样中Ni(Ⅱ)的新方法。对影响MSPE的因素进行了详细的考察。在最优实验条件下,方法对Ni(Ⅱ)的检出限为0.015ng·mL-1,相对标准偏差(RSDs)为7.3%(n=7,c=0.1ng·mL-1),富集倍数为24.8,所制备的磁性离子印迹材料不同批次间RSDs为10.9%(n=5,c=0.1ng·mL-1),所合成的材料可以重复使用5次以上。采用该方法分析了标准水样(GSBZ50009-88)中的Ni(Ⅱ)含量,验证方法的准确性,测定值和标准值吻合良好。将该方法应用于东湖水和长江水中Ni(Ⅱ)的测定,加标回收率为90.6%~107.2%。     

丙烯腈、己二腈和丙腈与水的二元体系液-液相平衡数据的测定和关联(英文)

采用平衡法测定了丙烯腈+水、己二腈+水、丙腈+水三个二元体系在不同温度(303.15、313.15、323.15、333.15K)下的液-液相平衡数据;并采用NRTL(α=0.2,α=0.3)模型和UNIQUAC模型对液-液平衡数据进行了关联.结果显示,NRTL和UNIQUAC模型对三个二元体系在不同温度下的互溶度关联的目标函数值均小于1×10-17,实验值与计算值吻合较好,绝对偏差小于0.009,关联精度较高.该研究结果可为丙烯腈、丙腈和水三元平衡溶解度数据的模拟和预测提供可靠的基础数据,并对电解二聚法生产己二腈中电解液的分离提纯工艺具有一定的指导意义.     

一例Wells-Dawson型铌钨混配多酸的合成及光催化性能（英文）

在双氧水存在条件下,合成了一例Wells-Dawson型铌钨混配多酸K3.5Na4[H4.5(NbO2)6P2W12O5 6]·12.5H2O(1),X射线单晶结构分析表明,化合物1的多阴离子是一个六过氧铌基团取代的P2W12衍生物.六个铌原子分别与五个来自多酸框架上的氧原子和一个端位的过氧单元配位.另外,对化合物1的光催化产氢性能进行了初步研究.     

质量控制图用于石墨炉原子吸收光谱法检测海水中铅元素

为保证海水中重金属检测结果的准确可靠,以铅元素为例,每个工作日使用石墨炉原子吸收光谱仪平行测定铅质控样2次,收集20组有效数据后,通过计算均值、标准差得出上下控制限、警告线及辅助限,绘制出在当前实验室环境条件、仪器设备、试剂药品和人员水平等因素条件下的质量控制图。该质量控制图不仅用于实际检测过程中对检测结果进行监控,还可为该实验室的人员考核、留样复测等实验室质量控制行为提供结果判定依据。     

Single-Atom Iron Catalysts on Overhang-Eave Carbon Cages for High-Performance Oxygen Reduction Reaction

Single-atom catalysts have drawn great attention, especially in electrocatalysis. However, most of previous works focus on the enhanced catalytic properties via improving metal loading. Engineering morphologies of catalysts to facilitate mass transport through catalyst layers, thus increasing the utilization of each active site, is regarded as an appealing way for enhanced performance. Herein, we design an overhang-eave structure decorated with isolated single-atom iron sites via a silica-mediated MOF-templated approach for oxygen reduction reaction (ORR) catalysis. This catalyst demonstrates superior ORR performance in both alkaline and acidic electrolytes, comparable to the state-of-the-art Pt/C catalyst and superior to most precious-metal-free catalysts reported to date. This activity originates from its edge-rich structure, having more three-phase boundaries with enhanced mass transport of reactants to accessible single-atom iron sites (increasing the utilization of active sites), which verifies the practicability of such a synthetic approach.     

On-Surface Synthesis of Cumulene-Containing Polymers via Two-Step Dehalogenative Homocoupling of Dibromomethylene-Functionalized Tribenzoazulene

Cumulene compounds are notoriously difficult to prepare and study because their reactivity increases dramatically with the increasing number of consecutive double bonds. In this respect, the emerging field of on-surface synthesis provides exceptional opportunities because it relies on reactions on clean metal substrates under well-controlled ultrahigh-vacuum conditions. Here we report the on-surface synthesis of a polymer linked by cumulene-like bonds on a Au(111) surface via sequential thermally activated dehalogenative C−C coupling of a tribenzoazulene precursor equipped with two dibromomethylene groups. The structure and electronic properties of the resulting polymer with cumulene-like pentagon–pentagon and heptagon–heptagon connections have been investigated by means of scanning probe microscopy and spectroscopy methods and X-ray photoelectron spectroscopy, complemented by density functional theory calculations. Our results provide perspectives for the on-surface synthesis of cumulene-containing compounds, as well as protocols relevant to the stepwise fabrication of carbon–carbon bonds on surfaces.     

π-Interactions between Cyclic Carbocations and Aromatics Cause Zeolite Deactivation in Methanol-to-Hydrocarbon Conversion

The understanding of catalyst deactivation represents one of the major challenges for the methanol-to-hydrocarbon (MTH) reaction over acidic zeolites. Here we report the critical role of intermolecular π-interactions in catalyst deactivation in the MTH reaction on zeolites H-SSZ-13 and H-ZSM-5. π-interaction-induced spatial proximities between cyclopentenyl cations and aromatics in the confined channels and/or cages of zeolites are revealed by two-dimensional solid-state NMR spectroscopy. The formation of naphtalene as a precursor to coke species is favored due to the reaction of aromatics with the nearby cyclopentenyl cations and correlates with both acid density and zeolite topology.     

Electrochemical Phase Evolution of Metal-Based Pre-Catalysts for High-Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li-S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal-based pre-catalysts (Co₄N) in working Li-S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single-crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all-phase polysulfide-involving reactions. Consequently, Co₄N enables stable operation of high-rate (10 C, 16.7 mA cm⁻²) and electrolyte-starved (4.7 μL mg_S⁻¹) Li-S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low-valence metal compounds.     

Accelerating Crystallization of Open Organic Materials by Poly(ionic liquid)s

The capability to significantly shorten the synthetic period of a broad spectrum of open organic materials presents an enticing prospect for materials processing and applications. Herein we discovered 1,2,4-triazolium poly(ionic liquid)s (PILs) could serve as a universal additive to accelerate by at least one order of magnitude the growth rate of representative imine-linked crystalline open organics, including organic cages, covalent organic frameworks (COFs), and macrocycles. This phenomenon results from the active C5-protons in poly(1,2,4-triazolium)s that catalyze the formation of imine bonds, and the simultaneous salting-out effect (induced precipitation by decreasing solubility) that PILs exert on these crystallizing species.     

A General Strategy for Hollow Metal-Phytate Coordination Complex Micropolyhedra Enabled by Cation Exchange

The ability to incorporate functional metal ions (Mⁿ⁺) into metal–organic coordination complexes adds remarkable flexibility in the synthesis of multifunctional organic–inorganic hybrid materials with tailorable electronic, optical, and magnetic properties. We report the cation-exchanged synthesis of a diverse range of hollow Mⁿ⁺-phytate (PA) micropolyhedra via the use of hollow Co²⁺-PA polyhedral networks as templates at room temperature. The attributes of the incoming Mⁿ⁺, namely Lewis acidity and ionic radius, control the exchange of the parent Co²⁺ ions and the degree of morphological deformation of the resulting hollow micropolyhedra. New functions can be obtained for both completely and partially exchanged products, as supported by the observation of Ln³⁺ (Ln³⁺=Tb³⁺, Eu³⁺, and Sm³⁺) luminescence from as-prepared hollow Ln³⁺-PA micropolyhedra after surface modification with dipicolinic acid as an antenna. Moreover, Fe³⁺- and Mn²⁺-PA polyhedral complexes were employed as magnetic contrast agents.