An externally cooled beetle type scanning tunneling microscope for imaging in cryogenic liquids

We describe a variable temperature cryogenic scanning tunneling microscope designed for imaging and research in cryogenic liquids. It has an external Dewar type large scale cooling system with a temperature control range of roughly 85-110 K using pressure controlled liquid nitrogen cooling. The liquid nitrogen is kept in a closed chamber surrounding the STM and maintained at a pressure to suit the chosen temperature. Several gases have triple points in this temperature range and can therefore be liquified, such as argon, methane, silane and germane. The STM is based on a beetle type design built into a small cube vacuum chamber to fit into the cooling dewar. The system has been used for atomic resolution of highly oriented graphite submerged in a methane liquid at a temperature of 100 K.     

A modular scanning tunneling microscope with an interchangeable elastic closed cell and external actuators

We introduce a novel modular cell based scanning tunneling microscope with external piezoelectric actuators. A tip and a sample are contained in a closed interchangeable cell, consisting of a stiff top plate and a bottom part, fastened together by an elastic material. The bottom part, containing a scanning tip, is fastened to a base unit while the top plate, containing a sample, is capable of scanning motion by external piezoelectric actuators mounted in the same base unit. The actuators are pre-loaded by the deformation of the elastic material of the cell, giving an increased stability. This design is expected to simplify the scanning tunneling microscope (STM) operation in difficult environments greatly by enclosing only the tip and sample in a small cell-module, which is pluggable to a scanning mechanism and other supportive functionalities. A frequency characterization and an image scan showing atomic resolution of highly oriented graphite in air, at room temperature, is presented.     

Energy level alignment between C60 and Al using ultraviolet photoelectron spectroscopy

The energy level alignment between C₆₀ and Al has been investigated by using ultraviolet photoelectron spectroscopy. To obtain the interfacial electronic structure between C₆₀ and Al, C₆₀ was deposited on a clean Al substrate in a stepwise manner. The valence-band spectra were measured immediately after each step of C₆₀ deposition without breaking the vacuum. The measured onset of the highest occupied molecular orbital energy level was located at 1.59 eV from the Fermi level of Al. The vacuum level was shifted 0.68 eV toward lower binding energy with additional C₆₀ layers. The observed vacuum level shift means that the interface dipole exists at the interface between C₆₀ and Al. The barrier height of electron injection from Al to C₆₀ is 0.11 eV, which is smaller value than that of hole injection.     

X-PEEM/NEXAFS and AFM of polypyrrole and copper micro-patterns on insulating fluoropolymer substrates

Micro-patterns (80 μm and 10 μm) of copper and semi-conducting polypyrrole on insulating fluorinated ethylene propylene substrates were characterized using synchrotron-based X-ray Photoemission Electron Microscopy (X-PEEM), Near Edge X-ray Absorption Fine Structure (NEXAFS), and Atomic Force Microscopy (AFM). Electronic states in the polypyrrole are verified using the NEXAFS data, and sample degradation upon irradiation is addressed. X-PEEM images show homogeneous distributions of the corresponding elements in the patterns. They do not exhibit dichroic effects and give information about the growth of copper and polypyrrole (i.e. nucleation of Cu, overgrowth of PPy, formation of PPy granules). AFM results are used to verify the topography of the patterns and support the findings on pattern growth.     

ENSTAR detector forη- mesic studies

We have initiated a search for a new type of nuclear matter, theη-mesic nucleus, using beams from the multi-GeV hadron facility, COSY at Juelich, Germany. A large acceptance scintillator detector, ENSTAR has been designed and built at BARC, Mumbai and fully assembled and tested at COSY. A test run for calibration and evaluation has been completed. In this contribution we present the design and technical details of the ENSTAR detector and how it will be used to detect protons and pions (the decay products ofη-mesic bound state). The detector is made of plastic scintillators arranged in three concentric cylindrical layers. The readout of the detectors is by means of optical fibres. The layers are used to generate ΔE –E spectra for particle identification and total energy information of stopped particles. The granularity of the detector allows for position (θ and ?ø determination making the event reconstruction kinematically complete     

Some remarks on Saint-Venant's principle

We consider a three-dimensional hyperelastic cylinder in Ω = D × [0, ∞]. We study the asymptotic behaviour of the deformations of the cross-sections in an equilibrium state. In this case we show that the solutions either have exponential decay or exponential growth. We give some initial conditions such that the latter case occurs.     

Calibration of imaging laser-induced fluorescence measurements in highly absorbing flames

It has been described earlier that imaging measurements of laser-induced fluorescence (LIF) in flames can be calibrated to number densities with an integrated absorption measurement provided the integrated absorption is small. In this paper a method is presented that extends the technique to flames with substantial absorption, improves the number density determination and allows the experimental parameters to be chosen more freely. The method is based on an iterative computer procedure that reconstructs the 1-D spatially resolved absorption profile from laser measurements of the 1-D spatially resolved LIF and the integrated absorption of the laser beam. The technique is experimentally demonstrated by measurements of OH number densities in atmospheric flames. It is potentially a single-pulse method. Other applications of the iterative procedure are mentioned.     

In situ preparation of Bi-Sr-Ca-Cu-O superconducting films by laser sputtering

Superconducting films of Bi-Sr-Ca-Cu-O on (100) MgO substrates have been fabricated by XeCl-excimer-laser sputtering from ceramic targets of Bi_2.5Sr₂Ca₂Cu₃O_y in O₂ atmosphere. The films were polycrystalline with the c-axis (30.80±0.02Å) preferably oriented normal to the substrate surface. Without post-annealing the films showed metallic resistance behavior with zero resistance temperatures of up to T_c(0) }- 79 K. The critical current density of the films had values of up to j_c(50K)}- 10⁴ A/cm².     

MR imaging of teeth using a silent single point imaging technique

Magnetic resonance imaging (MRI) of teeth is an emerging application area which is still in development. Previous investigations did not fully focus on potential in vivo applications. Using ¹H and ³¹P MRI, we obtained ex vivo microimages of teeth with a silent single point imaging (SPI) technique. ¹H Images with an in-plane resolution of 310×310 μm² were obtained. Utilizing sine-shaped gradient ramps significantly reduced the sound pressure level of the experiment to that of background noise. ¹H magnetic resonance spectroscopy (MRS) was used to characterize the major components in the observed resonance. The spin–spin (T₂) relaxation times of water in enamel and dentin differed by at least one order of magnitude. Three-dimensional surface reconstruction of the data allowed for complete visualization of the tooth’s surface while volume reconstruction displayed the internal geometry. PACS 82.56.Na; 83.85.Fg; 87.61.-c; 87.19.-j; 43.50.Cb