Fabrication of a freestanding GaN layer by direct growth on a ZnO template using hydride vapor phase epitaxy

A new hydride vapor phase epitaxy (HVPE)-based approach for the fabrication of freestanding GaN (FS-GaN) substrates was investigated. For the direct formation of low-temperature GaN (LT-GaN) layers, the growth parameters were optimized: the polarity of ZnO, the growth temperature, and the V/III ratio. The FS-GaN layer was achieved by gas etching in an HVPE reactor. A fingerprint of Zn out-diffusion was detected in the photoluminescence measurements, especially for the thin (80 μm) FS-GaN film; however, a thicker film (400 μm) was effectively reduced by optimization of GaN growth.     

Precise determination of lithium isotopes in seawater using MC-ICP-MS

Li (lithium) isotope analysis using MC-ICP-MS is a very powerful tracer measurement method. This is widely used for identification of Li isotopes in many fields of study. This useful method, however, has an effect on the natural Li isotope background. This is impacted by the instrument matrix. In this study, we show that the MC-ICP-MS condition is characterized by both a low baseline background and a high-sensitivity distance at Ar plasma condition. In addition, the Li isotope ratio was measured by the use of experimental conditions that were superior to both the general plasma condition and those used in other studies. The samples were subjected to both acid leaching and a cation exchange resin (Bio-Rad AG 50 W-X8 200–400 mesh) modified for seawater samples. The isotope variations were corrected using the bracket method, the measured Li isotope ratio of sample, and the mean ratios of the L-SVEC standard (NIST L-SVEC Li₂CO₃) measured before and after the sample run. The isotope variation was presented as the deviation (per mil) of the measured ratio from that of the recommended value.     

Sonocrystallization of polycarbonate melts

In this paper, we showed the simplified continuous process to crystallize the polycarbonate (PC) melts using sonocrystallization which is based on ultrasonic cavitation and ‘hot spot’ theory. High power ultrasonic wave was introduced to crystallize the PC prepolymers which is generally used for solid‐state polymerization (SSP) to obtain the ultra‐high molecular weight PCs. The structure and properties of PC treated with ultrasonic wave such as torque changes and crystallinities were studied. The experimental results showed that ultrasonic wave could improve the crystallinities of PCs and sonication time was proportional to their crystallinity. This is attributed to the decrease of the specific volume and the resulting shrinkage is compensated by a flux of a polymer melt toward the crystallization front. Torque data were collected directly from the Haake internal mixer and crystallinities were evaluated from differential scanning calorimeter (DSC). This process is an environmentally benign process so that no additional solvents or treatments are needed and will be very useful in the conventional solid‐state process which is used industrially. Copyright © 2007 John Wiley & Sons, Ltd.     

Structural variability of endotoxins from R-type isogenic mutants of Shigella sonnei

The structural variations in the rough-type endotoxins [lipopolysaccharides (LPSs)] of Shigella sonnei mutant strains (S. sonnei phase II-4303, R41, 562H and 4350) were investigated by Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and tandem MS. A series of S. sonnei mutants had previously been the subject of analytical studies on the biosynthesis of heptose components in the core oligosaccharide region of LPSs. This study gives a complete overview on the structures of the full core and lipid A of S. sonnei mutant strains by MS. We found that the LPSs of the isogenic rough mutants were formed in a step-like manner containing 0:1:2:3 heptose in the deep core region of 4350, 562H, R41 and 4303, respectively, and the longest LPS from the mutant S. sonnei 4303 contained also five hexoses. The structural variations in the lipid A moiety and in the oligosaccharide part of the intact LPS were followed by MALDI-TOF-MS/MS. For the dissolution and the ionization of the samples, 2,5-dihydroxybenzoic acid in citric acid solution was applied as matrix. The detailed evaluation of the mass spectra indicates heterogeneity in the lipid part due to the differences in the phosphate and fatty acid composition.     

Analysis of therapeutic peptides in human urine by combination of capillary zone electrophoresis-electrospray mass spectrometry with preparative capillary isotachophoresis sample pretreatment

The presented study deals with the off-line coupling of preparative isotachophoresis (pITP) with on-line combination of capillary zone electrophoresis with electrospray mass spectrometric detection (CZE-ESI-MS) used for the analysis of therapeutic peptides (anserine, carnosine, and buserelin) in complex matrix (urine). Preparative capillary isotachophoresis, operating in a discontinuous fractionation mode in column-coupling configuration, served as a sample pretreatment technique to separation, and fractionation of mixture of therapeutic peptides present in urine at low concentration level. The fractions isolated by pITP procedure were subsequently analyzed by capillary zone electrophoresis with electrospray mass spectrometric detection. Acetic acid at 200 mmol L(-1) concentration served as background electrolyte in CZE stage and it is compatible with MS detection in positive ionization mode. In pITP fractionation procedure, sodium cation (10 mmol L(-1) concentration) as leading ion and beta-alanine as terminating ion (20 mmol L(-1) concentration) were used. While using CZE-ESI-MS, the limits of detection were 0.18 μg mL(-1) for carnosine, 0.17 μg mL(-1) for anserine and 0.64 μg mL(-1) for buserelin in water and 0.19 μg mL(-1) for carnosine, 0.50 μg mL(-1) for anserine and 0.74 μg mL(-1) for buserelin in 10 times diluted urine, respectively. The cleaning power of pITP sample pretreatment was proved as the peptides provided the higher MS signals at lower concentration levels resulting from the minimized matrix effects. The quality of obtained MS/MS spectra was very good so that they can provide information about the structure of analytes, and they were used for verification of the analytes identities. The pITP pretreatment improved the detection limits of the analyzed therapeutic peptides at least 25 times compared to the CZE-ESI-MS itself.     

A sorbitol-selective fluorescence sensor

A new anthracene derivative bearing two phenylboronic acid groups at the 1,8-positions was prepared and its binding properties towards sorbitol, xylitol, fructose, glucose and galactose have been studied using fluorescence analysis.     

Effect of iron restriction on outer membrane protein composition of Pseudomonas strains studied by conventional and microchip electrophoresis

In this study the outer membrane protein (OMP) composition of six Pseudomonas aeruginosa strains had been analyzed by conventional CE and microchip electrophoresis. Bacterial OMPs are important virulence factors and play a significant role in the pathogenesis of infectious diseases. Changes in their composition might refer to the altered pathogenic properties and antibiotic sensitivity of a certain strain. Pathogenic bacteria invading the human host have to multiplicate under iron-restricted conditions that induce changes in the OMP composition. High-molecular-weight OMPs have to be expressed, which serve as receptors for the iron-siderophore complexes. OMP patterns of bacteria obtained by the two different methods in this study were similar, all major proteins could be detected by both techniques, and the molecular weights showed good correlations, although direct comparison of the peak areas is not straightforward due to the different detection methods (UV and LIF). Changes in OMP composition under iron restriction could be detected, and appearance of a 92 kDa protein in all six P. aeruginosa strains and a 94 kDa protein in the KT 2 strain could be demonstrated. Besides that up- and downregulation of certain proteins could be also detected. The increased separation speed, picoliters of sample consumption, baseline separation achieved more frequently by this method--especially in the high-molecular-weight region--showed the advantages of microchip electrophoresis in the analysis of clinical samples.     

In vitro study of antibiotic effect on bacterial adherence to acrylic intraocular lenses

Implantation of artificial intraocular lenses into the eye during ophthalmic surgical procedures ensures an unliving surface on which bacterial pathogens may attach and form biofilms. Despite antibiotic treatment bacteria growing in biofilms might cause inflammation and serious complications. In this study the adhesive ability of 7 Staphylococcus aureus and 11 coagulase-negative Staphylococcus (CNS) strains to the surface of acrylic intraocular lenses had been examined by the ultrasonic method. In untreated cases adhesion of the S. aureus and CNS strains did not differ significantly. We could not demonstrate significant differences between the adhesive ability of the standard strains and the clinical isolates. In this study a single – 60 min long – antibiotic (ciprofloxacin and tobramycin) treatment had been applied, that correlate well with the single or intermittant antibiotic prophylaxis of patients. Ciprofloxacin administration was able to reduce significantly the number of attached cells on the surface of acrylic lenses both in the case of S. aureus and CNS strains. Dependence of the effect from concentration could also be demonstrated. Tobramycin treatment was able to inhibit significantly the attachment of S. aureus cells. Despite the debate on antibiotic prophylaxis we presented in our experiments that a single antibiotic administration can decrease the attachment of bacterial cells to the surface of acrylic intraocular lenses, and might be effective in the prevention of postoperative endophthalmitis, that is a rare but serious complication of ophthalmic surgery.