Temperature stabilized optical waveguide modulator

A low drive-voltage optical modulator using a Ti-diffused UNbO₃ optical waveguide has been fabricated. Stabilization against ambient temperature change was realized by using a miniature halfwave plate. The halfwave voltage, 3 dB bandwidth, optical insertion loss and extinction ratio were 3·8 V (at 1·06m wavelength), 850 MHz, 10 dB and 13 dB, respectively. A reduction scheme for the optical absorption caused by metallic electrodes, and an analysis of the modulator high frequency response are also reported.     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

Phototoxic process after rapid photosensitive membrane damage of 5,5"-bis(aminomethyl)-2,2':5',2"-terthiophene dihydrochloride

We report a new aspect of rapid (<30 s) light-induced cell membrane damage photosensitized by 5,5"-bis(aminomethyl)-2,2':5',2"-terthiophene dihydrochloride (BAT), which is a water-soluble alpha-terthienyl analogue, using a high-power laser (light intensity 1.6 W cm(-2)). In this paper, we will discuss the relationship between the exposure time of the cells to the photosensitizer and the phototoxic process. Three toxic processes can be identified: first, a non-light-mediated toxicity dependent on BAT-cell incubation; second, a phototoxicity independent of BAT exposure time when the BAT concentration is in the 2-10-microM range; third, a phototoxicity dependent on BAT exposure time when BAT concentration becomes 20 microM. The cytotoxicity decreases when alpha-tocopherol, an antioxidant, is added to a cell membrane. This pattern of phototoxicity is the typical of a phospholipid peroxidation chain reaction and oxidative damage of membrane proteins triggered by a reactive oxygen species generated by a triplet state of BAT. The BAT exposure time is clearly correlated with the partition of the photosensitizer in the cell membrane and inside the cell.     

Synthetic studies on (+)-aplasmomycin. 1. Stereoselective synthesis of the C-12˜C-17 segment

The C-12˜C-17 segment of (+)-aplasmomycin ( ) was synthesized stereoselectively starting from (−)-malic acid based on the stereoselective ketone reduction.     

Reactions of 1,2-dimethoxytetramethyldisilane with styrenes: Formation of a new type of silacyclopentanes having phenyl substituents on ring carbons

The reaction of 1,2-dimethoxytetramethyldisilane with styrene and α-methylstyrene in the presence of NaOMe catalyst in tetrahydrofuran (THF) gave the new silacyclopentanes 1,1-dimethyl-2,4-diphenyl-1-silacyclopentane (IIIa) and 1,1,2,4-tetramethyl-2,4-diphenyl-1-silacyclopentane (IIIb), respectively. These silacyclopentanes were found to exist as cis-trans mixtures. The use of sodium metal in place of NaOMe afforded similar results. Reactions of a polysilane mixture, MeO-(SiMe₂)_nOMe (n ≧ 3), with the styrenes also gave similar results. In some cases, polysilacycloalkanes such as 1,2,3-trisilacyclopentanes (IV) and 1,2,3,4-tetrasilacyclohexanes (V) were obtained as by-products. A mechanism for the formation of the silacyclopentanes and polysilacycloalkanes is presented. It was found that electron impact decomposition of silacyclopentanes IIIa and IIIb, trisilacycloalkane IV and tetrasilacycloalkane V gave molecular ions corresponding to the silacyclopropane, cyclotrisilane and cyclotetrasilane systems.     

X-ray scattering by water molecules studied by using synchrotron radiation

The energy spectra of free water molecules were measured at scattering angles 2θ ranging from 10.5° to 75.7°, using an angle-dispersive-type diffractometer and synchrotron radiation as an X-ray source. A silicon (111) monochrometer was used to obtain incident X-rays with the wavelengths of (1.543/n) Å (n = 1,3,4,5). Observed inelastic scattering peaks are clearly separated from eleastic ones at s values [s = (4π/λ) sin Å] larger than 8 Å^?1. The increase of the separation with an increasing s value was consistent with the classical theory of the Compton shift. The total (elastic plus inelastic) intensities were obtained over a range of s = 0.74–5.0 Å^?1. Experimental difference intensities Δσ_ee and Δσ_ne were obtained separately by combining the X-ray and high-energy electron scattering data. The experimental results are in reasonable agreement with the theoretical intensities calculated from SCF and CI molecular wave functions with a basis set of double-zeta plus polarization functions. © 1994 John Wiley & Sons, Inc.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

Template-directed DNA photoligation via alpha-5-cyanovinyldeoxyuridine

[reaction: see text] We describe an efficient template-directed photoligation of oligodeoxynucleotides (ODNs) using alpha-5-cyanovinyldeoxyuridine (alpha(C)U). An efficient photoligation was produced by photoirradiation of an ODN containing alpha(C)U at the 3' end with an ODN containing thymine at the 5' end in the presence of a template ODN. This photoligation method is a new and efficient way to synthesize branched ODNs.     

Determination of nitrogen- and phosphorus-containing pesticide residues in vegetables by gas chromatography with nitrogen-phosphorus and flame photometric detection after gel permeation chromatography and a two-step minicolumn cleanup

An efficient and reliable multiresidue method for determining pesticide residues in a large number of vegetable samples was studied. First, the important target compounds for monitoring, 52 nitrogen- and/or phosphorus-containing pesticides, were selected. The sample was extracted with acetonitrile, and the separated acetonitrile layer was cleaned up by a salting-out step. The acetonitrile extract was purified by gel permeation chromatography that divided the pesticide eluate into 2 fractions; the pesticide fractions were respectively purified by a 2-step minicolumn cleanup in which the second pesticide fraction was loaded on a silica-gel minicolumn. After a Florisil minicolumn was inserted on the silica-gel minicolumn, the first pesticide fraction was loaded on the tandem minicolumn, which was eluted with acetone-petroleum ether (3 + 7). The combined eluate was subjected to dual-column gas chromatography (GC) with nitrogen-phosphorus and flame photometric detection. By application of the optimum cleanup conditions to the 52 pesticides selected, good resolution and low breakdown levels of the pesticides during GC were maintained. Recoveries of the 52 pesticides from fortified cabbage, lettuce, spring onion, and spinach ranged from 72 to 108% with relative standard deviations of 2-17%, except for the recoveries of methamidophos and chlorothalonil. The detection limits of the pesticides were satisfactory (0.001-0.009 mg/kg) for monitoring pesticide residues in vegetables.     

Relative sensitivity factors in direct current glow discharge mass spectrometry using Kr and Xe gas — Estimation of the role of Penning ionization

Relative sensitivity factors (RSF) (Fe=1) were determined for steel, aluminium and copper standard samples by direct current glow discharge mass spectrometry using Kr and Xe as discharge gas. In general, the RSF values in Kr and Xe were higher than in Ar; however for S and P in Kr gas and P, As and Se in Xe gas they were considerably lower. This decrease is related to the relative importance of the Penning ionization process in overall ionization of the sputtered species. The results showed the percentage of Penning ionization to account for 75.6–82.0% for Se, As and P and 64.2% for S.