Quantitation of 17beta-nandrolone metabolites in boar and horse urine by gas chromatography-mass spectrometry

A method to quantify metabolites of 17beta-nandrolone (17betaN) in boar and horse urine has been optimized and validated. Metabolites excreted in free form were extracted at pH 9.5 with tert-butylmethylether. The aqueous phases were applied to Sep Pak C18 cartridges and conjugated steroids were eluted with methanol. After evaporation to dryness, either enzymatic hydrolysis with beta-glucuronidase from Escherichia coli or solvolysis with a mixture of ethylacetate:methanol:concentrated sulphuric acid were applied to the extract. Deconjugated steroids were then extracted at alkaline pH with tert-butylmethylether. The dried organic extracts were derivatized with MSTFA:NH4I:2-mercaptoethanol to obtain the TMS derivatives, and were subjected to analysis by gas chromatography mass spectrometry (GC/MS). The procedure was validated in boar and horse urine for the following metabolites: norandrosterone, noretiocholanolone, norepiandrosterone, 5beta-estran-3alpha, 17beta-diol, 5alpha-estran-3beta, 17beta-diol, 5alpha-estran-3beta, 17alpha-diol, 17alpha-nandrolone, 17betaN, 5(10)-estrene-3alpha, 17alpha-diol, 17alpha-estradiol and 17beta-estradiol in the different metabolic fractions. Extraction recoveries were higher than 90% for all analytes in the free fraction, and better than 80% in the glucuronide and sulphate fractions, except for 17alpha-estradiol in the glucuronide fraction (74%), and 5alpha-estran-3beta, 17alpha-diol and 17betaN in the sulphate fraction (close to 70%). Limits of quantitation ranged from 0.05 to 2.1 ng mL(-1) in the free fraction, from 0.3 to 1.7 ng mL(-1) in the glucuronide fraction, and from 0.2 to 2.6 ng mL(-1) in the sulphate fraction. Intra- and inter-assay values for precision, measured as relative standard deviation, and accuracy, measured as relative standard error, were below 15% for most of the analytes and below 25%, for the rest of analytes. The method was applied to the analysis of urine samples collected after administration of 17betaN laureate to boars and horses, and its suitability for the quantitation of the metabolites in the three fractions has been demonstrated.     

Structures and magnetic properties of tetranuclear nickel(II) complexes with unusual mu3-1,1,3 azido bridges

Pyrazolate-based dinucleating ligands with thioether-containing chelate arms have been used for the synthesis of a family of novel tetranuclear nickel(II) complexes [L2Ni4(N3)3(O2CR)](ClO4)2 that incorporate three azido bridges and one carboxylate (R = Me, Ph). Molecular structures have been elucidated by X-ray crystallography in four cases, revealing Ni4 cores with a unique topology in which two of the azido ligands adopt an unusual mu3-1,1,3 bridging mode. The compounds were further characterized by mass spectrometry, IR spectroscopy, and variable-temperature magnetic susceptibility measurements. Magnetic data analyses indicate a combination of significant intramolecular ferromagnetic and antiferromagnetic exchange interactions that give rise to an overall S(T) = 0 ground state. The sign and the magnitude of the individual couplings have been rationalized in the framework of the common magnetostructural correlations for end-to-end and end-on azido linkages, suggesting that these correlations also remain valid for the respective fragments of multiply bridging mu3-1,1,3 azido ligands.     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Selective Production of Carbon Monoxide via Methane Oxychlorination over Vanadyl Pyrophosphate

A catalytic process is demonstrated for the selective conversion of methane into carbon monoxide via oxychlorination chemistry. The process involves addition of HCl to a CH₄–O₂ feed to facilitate C?H bond activation under mild conditions, leading to the formation of chloromethanes, CH₃Cl and CH₂Cl₂. The latter are oxidized in situ over the same catalyst, yielding CO and recycling HCl. A material exhibiting chlorine evolution by HCl oxidation, high activity to oxidize chloromethanes into CO, and no ability to oxidize CO, is therefore essential to accomplish this target. Following these design criteria, vanadyl pyrophosphate (VPO) was identified as an outstanding catalyst, exhibiting a CO yield up to approximately 35 % at 96 % selectivity and stable behavior. These findings constitute a basis for the development of a process enabling the on‐site valorization of stranded natural‐gas reserves using CO as a highly versatile platform molecule.     

Electrochemical, EPR and computational results on [Fe2Cp2(CO)2]-based complexes with a bridging hydrocarbyl ligand

The dimetallacyclopentenone complexes [Fe₂Cp₂(CO)(μ−CO){μ−η¹:η³−C_αHC_β(R)C(O)}] (R = CH₂OH, 1a; R = CMe₂OH, 1b; R = Ph, 1c) were prepared by photolytic reaction of [Fe₂Cp₂(CO)₄] with alkyne according to the literature procedure. The X-ray and the electrochemical characterization of 1c are presented. The μ-allenyl compound [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β−C_αHC_βCMe₂][BF₄] ([2][BF₄]), obtained by reaction of 1b with HBF₄, underwent monoelectron reduction to give a radical species which was detected by EPR at room temperature. The EPR signal has been assigned to [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β-C_αHC_βCMe₂}], [2]^•. The molecular structures of [2]⁺ and [2]^• were optimized by DFT calculations. The unpaired electron in [2]^• is localized mainly at the metal centers and, coherently, [2]^• does not undergo carbon-carbon dimerization, by contrast with what previously observed for the μ-vinyl radical complex [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²-CHCH(Ph)}]^•, [3]^•. Electron spin density distributions similar to the one of [2]^• were found for the μ-allenyl radical complexes [Fe₂Cp₂(CO)₂(μ-CO){μ-η¹:η²_α,β-C_αHC_βC(R¹)(R²)}]^• (R¹ = R² = H, [4]^•; R¹ = H, R² = Ph, [5]^•; R¹ = R² = Ph, [6]^•).     

Synthesis of 3-amino-4-fluoropyrazoles

Fluorinated pyrazoles bearing additional functional groups that allow further functionalization are of considerable interest as building blocks in medicinal chemistry. The developed synthetic strategy for new 3-amino-4-fluoropyrazoles consists of a monofluorination of β-methylthio-β-enaminoketones using 1-(chloromethyl)-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor) toward the corresponding monofluorinated enaminoketones, followed by condensation with different hydrazines.     

Interface chemistry and molecular interactions of phosphonic acid self-assembled monolayers on oxyhydroxide-covered aluminum in humid environments

Barrier properties of self-assembled octadecylphosphonic acid (ODPA) monolayers on plasma-modified oxyhydroxide-covered aluminum surfaces were analyzed by means of in situ photoelastic modulated infrared reflection absorption spectroscopy (PM-IRRAS). The surface hydroxyl density prior to ODPA adsorption was increased by means of a low-temperature H(2)O-plasma treatment. Adsorption isotherms of H(2)O on ODPA self-assembled monolayer (SAM) modified surfaces in comparison to bare oxide covered aluminum surfaces showed that the ODPA SAM leads to a strongly reduced amount of adsorbed water based on the inability of water to form hydrogen bonds to the low-energy aliphatic surface. However, the ODPA SAM covered surfaces did not show a significant inhibition of the H(2)O/D(2)O isotope exchange reaction between the D(2)O gas phase and the hydroxyl groups of the aluminum oxyhydroxide film, as the interfacial layer between the ODPA SAM and the metal substrate, while the interfacial phosphonate group as well as the orientation of the SAM is not affected by the adsorption of water. It can be followed that the strong adhesion promoting and high corrosion resistances of organophosphonate monolayers on oxyhydroxide-covered aluminum is a result of the strong acid-base interaction of the phosphonate headgroup with the Al ions in the oxyhydroxide film, even in the presence of high interfacial water activity and the molecular interactions of the aliphatic chains. However, the barrier effect of such monolayers on the transport of water is negligible.     

Two step, hydrolytic-solvothermal synthesis of redispersible titania nanocrystals and their gas-sensing properties

A titanium chloromethoxide solution was prepared by reacting TiCl₄ with methanol, followed by water addition. The starting solutions were characterized by Fourier Transform Infrared (FTIR) spectroscopy, evidencing that the in situ generated water results in early hydrolysis of the chloroalkoxide. The solution was reacted with molten dodecylamine at room temperature, obtaining a white slurry of amorphous titania nanoparticles. Stable, redispersible TiO₂ nanocrystals could be prepared by subsequent solvothermal treatment in oleic acid at 250???C. The use of oleic acid was essential for obtaining crystalline structures, while other surfactants prevented crystallization. The nanocrystals were characterized by X-ray Diffraction and Transmission Electron Microscopy, confirming the formation of anatase TiO₂ nanocrystals with a mean size of 3.3?nm. The TiO₂ nanocrystals were used for fabricating gas-sensing devices, which were tested towards ethanol vapors. The initial small size of the nanocrystals, and the limited size growth during the high-temperature sensor operation, result in remarkable sensing performances if compared with bulk titania sensors.