MgO、Al_2O_3、SiO_2催化剂上湿天然气中乙烷氧化脱氢的研究(英文)

研究了ＭｇＯ、Ａｌ２Ｏ３、ＳｉＯ２催化剂对湿天然气中乙烷氧化脱氢反应的影响，发现ＭｇＯ对乙烷脱氢有较好的活性，７００Ｃ时，Ｃ２Ｈ４选择性达４１．８５％，收率达１８．７５％。考察了催化剂酸碱性对反应的影响，适当碱性的催化剂有利于反应的进行，催化剂活性顺序与碱性大小顺序相一致为ＭｇＯ＞Ａｌ２Ｏ３＞ＳｉＯ２。催化剂活性顺序与其晶格氧流动性有顺应关系。     

Mixed Conduction in BaCe0.8Pr0.2O3-α Ceramic

BaCe0.8Pr0.2O3-α ceramic was synthesized by high temperature solid-state reaction. The structural characteristics and the phase purity of the crystal were determined using powder X-ray diffraction analysis. By using the methods of AC impedance spectroscopy, gas concentration cell and electrochemical pumping of hydrogen, the conductivity and ionic transport number of BaCe0.8Pr0.2O3-α were measured, and the electrical conduction behavior of the material was investigated in different gases in the temperature range of 500-900 ffiC. The results indicate that the material was of a single perovskite-type orthorhombic phase. From 500 ffiC to 900 ffiC, electronic-hole conduction was dominant in dry and wet oxygen, air or nitrogen, and the total conductivity of the material increased slightly with increasing oxygen partial pressure in the oxygen partial pressure range studied. Ionic conduction was dominant in wet hydrogen, and the total conductivity was about one or two orders of magnitude higher than that in hydrogen-free atmosphere (oxygen, air or nitrogen).     

Identification of Cyclic Dipeptides and a New Compound (6-(5-Hydroxy-6-methylheptyl)-5,6-dihydro-2H-pyran-2-one) Produced by Streptomyces fungicidicus against Alternaria solani

As an important microbial resource, Actinomycetes, especially Streptomyces, have important application values in medicine and biotechnology. Streptomyces fungicidicus SYH3 was isolated from soil samples in tomato-growing areas and showed good inhibitory effects on Alternaria solani in tomato. To obtain pure active compounds, SYH3 fermentation broth was subjected to XAD-16 macroporous resin and silica gel column chromatography. Combined with the repeated preparation and separation of preparative high-performance liquid chromatography (HPLC), a total of four monomer compounds were obtained after activity tracking. Compound 4 was identified as a new six-membered lactone ring compound named 6-(5-hydroxy-6-methylheptyl)-5,6-dihydro-2H-pyran-2-one by 1D and 2D nuclear magnetic resonance (NMR) data and mass spectrometry (MS). The other three active compounds belong to the cyclodipeptide, and their half maximal inhibitory concentration (IC₅₀) values against A. solani were 43.4, 42.9, and 30.6 μg/mL, respectively. Compound 4 significantly inhibited the spore germination and induced swollen and deformed local hyphae of A. solani with an IC₅₀ value of 24.9 μg/mL. Compound 4 also had broad-spectrum antifungal activity and had a good antifungal effect on the tested plant-pathogenic fungi. The modes of action of new compound (4) still require further investigation, representing a novel and effective anti-fungal agent for future application.     

Controllable Construction of Amino-Functionalized Dynamic Covalent Porous Polymers for High-Efficiency CO2 Capture from Flue Gas

The design of high-efficiency CO₂ adsorbents with low cost, high capacity, and easy desorption is of high significance for reducing carbon emissions, which yet remains a great challenge. This work proposes a facile construction strategy of amino-functional dynamic covalent materials for effective CO₂ capture from flue gas. Upon the dynamic imine assembly of N-site rich motif and aldehyde-based spacers, nanospheres and hollow nanotubes with spongy pores were constructed spontaneously at room temperature. A commercial amino-functional molecule tetraethylenepentamine could be facilely introduced into the dynamic covalent materials by virtue of the dynamic nature of imine assembly, thus inducing a high CO₂ capacity (1.27 mmol·g⁻¹) from simulated flue gas at 75 °C. This dynamic imine assembly strategy endowed the dynamic covalent materials with facile preparation, low cost, excellent CO₂ capacity, and outstanding cyclic stability, providing a mild and controllable approach for the development of competitive CO₂ adsorbents.     

H-Bonding Room Temperature Phosphorescence Materials via Facile Preparation for Water-Stimulated Photoluminescent Ink

Pure organic room-temperature phosphorescence (RTP) materials built upon noncovalent interactions have attracted much attention because of their high efficiency, long lifetime, and stimulus-responsive behavior. However, there are limited reports of noncovalent RTP materials because of the lack of specific design principles and clear mechanisms. Here, we report on a noncovalent material prepared via facile grinding that can emit fluorescence and RTP emission differing from their components’ photoluminescent behavior. Exciplex can be formed during the preparation process to act as the minimum emission unit. We found that H-bonds in the RTP system provide restriction to nonradiative transition but also enhance energy transformation and energy level degeneracy in the system. Moreover, water-stimulated photoluminescent ink is produced from the materials to achieve double-encryption application with good resolution.     

Electrochemical oxidative rearrangement of tetrahydro-β-carbolines in a zero-gap flow cell

Oxidative rearrangement of tetrahydro-β-carbolines (THβCs) is one of the most efficient methods for the synthesis of biologically active spirooxindoles, including natural products and drug molecules. Here, we report the first electrochemical approach to achieve this important organic transformation in a flow cell. The key to the high efficiency was the use of a multifunctional LiBr electrolyte, where the bromide (Br⁻) ion acts as a mediator and catalyst and lithium ion (Li⁺) acts as a likely hydrophilic spectator, which might considerably reduce diffusion of THβCs into the double layer and thus prevent possible nonselective electrode oxidation of indoles. Additionally, we build a zero-gap flow cell to speed up mass transport and minimize concentration polarization, simultaneously achieving a high faradaic efficiency (FE) of 96% and an outstanding productivity of 0.144 mmol (h⁻¹ cm⁻²). This electrochemical method is demonstrated with twenty substrates, offering a general, green path towards bioactive spirooxindoles without using hazardous oxidants.

A zero-gap flow cell was designed for the first electro-oxidative rearrangement of tetrahydro-β-carbolines to spirooxindoles with high yield, faradaic efficiency and productivity when LiBr was discovered as a bi-functional mediator and catalyst.     

Symplectic perturbation series methodology for non-conservative linear Hamiltonian system with damping

In this paper,the symplectic perturbation series methodology of the non-conservative linear Hamiltonian system is presented for the structural dynamic response ...     

Isolation of a carbon nanohoop with M(o)bius topology

Carbon nanohoop,a class of constrained molecular architecture consisting of linked arene units,has attracted considerable interest from both experimental and th...     

Determination of an Unknown Time-dependent Heat Source from A Nonlocal Measurement by Finite Difference Method

In this paper, we consider an inverse time-dependent source problem of heat conduction equation.Firstly, the ill-posedness and conditional stability of this inverse source problem is analyzed. Then, a finite difference inversion method is proposed for reconstructing the time-dependent source from a nonlocal measurement. The existence and uniqueness of the finite difference inverse solutions are rigorously analyzed, and the convergence is proved. Combined with the mollification method, the propos...