聚苯硫醚纤维的抗张强度与工艺和结构的关系

以熔融纺丝法制备出不同结晶度的各向同性聚苯硫醚纤维作为样品,根据密度和声速测定值确定出PPS晶相和无定形相的本征横向声模量E0⊥,c(4.40 GPa)和E0⊥,am(1.99 GPa).利用密度梯度法测定出的结晶度Xc和X-衍射法测定的晶区取向因子fc,按照Samules模型计算出不同牵伸和定型工艺下制备的PPS纤维样品的非晶区取向因子(fam),在此基础上分析PPS纤维抗张强度与牵伸定型工艺参数、结构之间的关系.结果表明,PPS纤维的最佳牵伸温度及紧张热定型温度分别在90℃和190℃附近;提高PPS纤维的牵伸温度及紧张热定型温度可以增加纤维的结晶度,在一定范围内对纤维抗张强度的增加有促进作用;但较高的牵伸温度及紧张热定型温度不利于纤维非晶区取向的提高,造成PPS纤维抗张强度降低.牵伸倍数的增加可以有效提高PPS纤维的非晶区取向程度,抗张强度也随着增加.     

光交联Pickering乳液中的粒子稳定剂制备胶体体微胶囊

研究了光敏性聚合物刷修饰二氧化硅纳米粒子的制备及其乳化行为, 提供了一种制备新颖“胶体体”微胶囊的方法. 首先, 在二氧化硅纳米粒子表面引入原子转移自由基聚合(ATRP)引发剂分子, 通过表面引发ATRP得到含有香豆素侧基聚合物刷光敏性的纳米二氧化硅粒子(SiO₂-PMMA-PCMA); 然后, 以该粒子为乳化剂制备油包水型的皮克林乳液; 最后, 在紫外光的照射下引发香豆素侧基的交联反应从而得到“胶体体”微胶囊. 结果表明, 香豆素单体7-(2-甲基丙烯酰乙氧基)-4-甲基香豆素(CMA)和SiO₂-PMMA-PCMA在紫外光作用下都可以发生交联反应, 以SiO₂-PMMA- PCMA纳米粒子作乳化剂可以制备稳定的皮克林乳液, 光交联后得到的“胶体体”微胶囊的平均粒径约为170 μm.     

Gamma-Cyclodextrin Production Using Cyclodextrin Glycosyltransferase from Bacillus clarkii 7364

The production of cyclodextrins (CDs) by cyclodextrin glycosyltransferase (CGTase) from Bacillus clarkii 7364 was studied. Forty-seven percent (w/w) conversion rate to ??-CD was obtained in the process performed by reacting 5 U per gram of starch CGTase with 15?% (w/v) soluble starch in 0.025?M sodium phosphate?CNaOH buffer (pH 12) at 55?°C in the presence of 2?% (w/v) glycyrrhizic acid. Meanwhile, the ratio of ??:??-CD was 89:11, with negligible formation of ??-CD. Under these conditions, there is a significant increase in overall production of CDs and a marked change in product selectivity for ??-CD. The possible mechanisms were discussed upon different product profiles with respect to the size and amount of CDs synthesized at different reaction conditions. The approach described here can be easily applied to an enzymatic process for the production of ??-CD on an industrial scale, and such high selectivity, at high conversions, is especially attractive from a commercial perspective.     

Mn（OAc）2/Schiff base as a new efficient catalyst system for the Henry reaction of nitroalkanes with aldehydes

A series of novel Schiff bases bearing triazole structure were synthesized and characterized by IR and NMR.Mn（OAc）₂/Schiff base efficiently catalyzed Henry reaction of nitroalkanes with aldehydes to produce the corresponding products of β-nitroalcohols, under mild conditions with high yields（up to 99%）.A reaction mechanism is proposed based on the experimental results.     

碳纳米管/聚苯胺/石墨烯复合纳米碳纸及其电化学电容行为

通过真空抽滤的方法制备碳纳米管纸,并对其进行循环伏安电化学氧化处理.以该电化学氧化处理的碳纳米管(CV-CNT)纸为基体,采用电化学聚合沉积聚苯胺(PANI),随后吸附石墨烯(GR),制备具有三明治夹心结构的碳纳米管/聚苯胺/石墨烯(CV-CNT/PANI/GR)复合纳米碳纸.该结构外层为GR,内层由PANI包裹的CNT形成网络骨架,充分发挥三者各自优势构建柔性电极材料.用场发射扫描电镜(FE-SEM)、透射电子显微镜(TEM)、拉曼光谱对其形貌与结构进行表征,并测试其电化学性能.研究发现:PANI呈纳米晶须状,并均匀包裹在CV-CNT表面;该复合碳纸具有良好的电容特性、大电流充放电特性以及良好的循环稳定性能.电流密度为0.5A·g-1时,比电容可达415F·g-1;20A·g-1时仍能保持106F·g-1的比电容.由于GR的保护作用,1000次循环之后较CV-CNT/PANI保持更高的有效比电容.该CV-CNT/PANI/GR复合碳纸展现出在高性能超级电容器柔性电极材料的潜在应用价值.     

火焰原子吸收光谱法测定红土镍矿中铜、锌、铬含量

红土镍矿样品用盐酸、硝酸分解,残渣用焦硫酸钾熔融,在稀盐酸介质中,采用氘灯扣除背景,分别用原子吸收光谱仪于波长324.8,213.9,357.9 nm处,使用空气–乙炔火焰,测量铜、锌、铬的含量。在最佳实验条件下,铜、锌、铬的质量浓度分别在0.50～2.50,0.30～1.50,0.50～4.50 mg/L范围内与吸光度线性关系良好,相关系数r分别为0.9986,0.9943,0.9942。方法检出限铜为0.0067 mg/L,锌为0.0010 mg/L,铬为0.0014 mg/L,加标回收率为95.0%～105.7%。精密度试验验证铜、锌、铬的含量分别在0.01%～0.50%,0.01%～1.00%,0.01%～4.00%范围内重复性和再现性较好。此方法适合于红土镍矿中铜、锌、铬含量的测定。     

5,10,15,20-四{对[3,5-二-(烷氧基)苯甲酰胺基]苯基}卟啉及其锌配合物的合成表征

设计合成了5种未见文献报道的5,10,15,20-四{对[3,5-二-(烷氧基)苯甲酰胺基]苯基}卟啉及其锌金属配合物,并用IR,UV-Vis,1H NMR,元素分析以及XPS对其组成和结构进行了表征,研究了这10种酰胺基系列卟啉化合物的拉曼光谱和荧光光谱的变化.结果显示链长对荧光和拉曼光谱没有明显影响,其取代基效应基本相同,配体的荧光强度强于锌配合物的荧光强度.在拉曼光谱中,由于卟啉分子平面的对称性由D2h变为D4h群及其锌离子d轨道的电子效应,卟啉配体和锌配合物之间的拉曼光谱有很大差别.     

Preparation, photophysical, and electrochemical properties of two polynuclear Ru(II) polypyridyl complexes containing imidazole-based ligands

A tripodal ligand L¹ and dipodal ligand L² containing imidazole rings have been synthesized by the reaction of 1,10-phenanthroline-5,6-dione with 2,2??-bipyridine-4,4??-dicarbaldehyde and 4-methyl-2,2??-bipyridine-4??-carbaldehyde, respectively, in the presence of ammonium acetate. Both ligands have two kinds of nonequivalent coordinating sites: one involving the phenanthroline moiety and the other involving the 2,2??-bipyridine moiety. The Ru(II) complexes, [(bpy)₆Ru₃(L¹)](PF₆)₆ and [(bpy)₄Ru₂(L²)](PF₆)₄ (bpy?=?2,2??-bipyridine), have been obtained by refluxing Ru(bpy)₂Cl₂·2H₂O with each ligand in solution. The two complexes display MLCT absorptions at 465 and 480?nm, respectively, and emission at 665 and 675?nm, respectively, in CH₃CN solution. Electrochemical studies of both complexes show one Ru(II)-centered oxidation at around 1.29?V and three ligand-centered reductions.     

Controlling growth of aligned carbon nanotubes from porous silicon templates

Fabricating well-aligned carbon nanotubes, especially, on a silicon substrate is very important for their applications. In this paper, an aligned carbon nanotube array has been prepared by pyrolysis of hydrocarbons catalyzed by nickel nanoparticles embedded in porous silicon (PS) templates. High-magnification transmission electron microscopy images confirm that the nanotubes are well graphitized. The PS substrates with pore sizes between 10 and 100 nm play a control role on the growth of carbon nanotubes and the diameters of the tubes increase with the enlargement of the pores of the substrates. However, such a control role cannot be found in the macro-PS substrates.     

树脂NKY对染料活性艳蓝KN-R的吸附特性

本文系统地研究了树脂ＮＫＹ对染料活性艳蓝ＫＮ－Ｒ的静态吸附性能,并与其它提取分离有机物的某些商品化吸附剂进行了比较。结果表明,树脂ＮＫＹ吸附ＫＮ－Ｒ具有很好的效果,吸附速率由液膜扩散控制,吸附等温曲线由三参数方程非线性回归求出的常数可计算△Ｇ＾０,由温度对吸附的影响求得的△Ｈ＾０说明吸附过程中吸热的而且是自发进行的。