Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006     

Rheology,morphology, and estimation of the interfacial tension of binary blends based on low‐density polyethylene/poly(trimethylene terephthalate) and high‐density polyethylene/poly(trimethylene terephthalate) [retracted article]

It has come to our attention that this article, “Rheology, Morphology, and Estimation of the Interfacial Tension of Binary Blends Based on Low‐Density Polyethylene/Poly(trimethylene terephthalate) and High‐Density Polyethylene/Poly(trimethylene terephthalate)” by A. A. Shokri and S. E. Zamani was previously published under the title, “Rheology, Morphology and Estimation of Interfacial Tension of LDPE/EVA and HDPE/EVA Blends” by H. A. Khonakdar, S. H. Jafari, A. Yavari, A. Asadinezhad, U. Wagenknecht, in Polymer Bulletin 54, 75–84 (2005), . We have retracted the article, and offer our apologies to the authors of the original paper.     

Determination of streptomycin in a pharmaceutical sample based on its degradation by hydrogen peroxide in the presence of copper(II).

The kinetics of streptomycin degradation by hydrogen peroxide at pH 7.4 was investigated. The reaction was catalyzed by traces of Cu(II) ions, and it was followed spectrophotometrically at 322 nm by applying the initial-rate method. The kinetic parameters of the reaction are reported, and a rate equation is suggested. From the dependence of the relative rate constants on the temperature, the activation energy was calculated to be 57.5 kJ/mol. Based on this reaction, a kinetic method for streptomycin determination is proposed. The calibration graph is linear in the ranges 1.94 - 15.48 microg/cm(3) and 0.15 - 1.94 microg/cm(3). The influence of foreign ions and molecules on the accuracy of the determinations was investigated. The proposed kinetic method has high selectivity and good sensitivity, and enabled to determine streptomycin in pharmaceutical samples.     

Gold ultra-microelectrode arrays: application to the steady-state voltammetry of hydroxide ion in aqueous solution.

Gold ultra-microelectrode arrays are used to explore the electrochemical oxidation of hydroxide ions and are shown to be analytical useful. Two types of ultra-microelectrode arrays are used; the first consist of 256 individual electrodes of 5 microm in radius, 170 of which are electrochemically active in a cubic arrangement which are separated from their nearest neighbour by a distance of 100 microm. The second array compromises 2597 electrodes of 2.5 microm in radius and of which 1550 of which are electrochemically active in a hexagonal arrangement separated by the nearest neighbour by 55 microm. Well defined voltammetric waves are found with peak currents proportional to the concentration of hydroxide ions in the range 50 microM to 1 mM. Detection limits of 20 microM using the 170 ultra-microelectrode and 10 microM with the 1550 ultra-microelectrode array are shown to be possible but with a higher sensitivity of 4 mA M(-1) observed using the 1550 ultra-microelectrode array compared to 1.2 mA M(-1) with the 170 ultra-microelectrode array.     

Contact melting in the lead-tellurium system

Contact melting (CM) in the lead-tellurium system is considered. Spontaneous temperature elevation is observed as a result of the exothermic reaction of lead telluride formation in the contact site. The effects of direct current (dc) and dopants on the CM temperature are studied.     

Synthesis and characterization of ciprofloxacin compounds with cadmium(II) and mercury(II) chlorides

Five new compounds of ciprofloxacin (CfH = C₁₇H₁₈FN₃O₃) with cadmium(II) and mercury(II) chlorides were synthesized. The compounds were characterized by chemical analysis, powder X-ray diffraction, pH-metric titration, UV spectroscopy, and thermal analysis.     

Ferromagnetic material CdGeP2:Mn for spintronics

Solid solutions Cd_1?x Mn_xGeP₂ (x=0?0.19) have been synthesized and identified. In these solutions, the unit cell parameters decrease with an increase in the manganese content. The solid solution Cd_0.81Mn_0.19GeP₂ is a ferromagnet with the Curie temperature T _C ≈ 311 K. The paramagnetic moment of Mn²⁺ ions equal to 5.8 μ_B, as well as the spontaneous magnetization constituting 76% of the total magnetization of a crystal, has been determined with the use of the Langevin function. The origin of ferromagnetism in CdGeP₂:Mn is exchange mediated by charge carriers (holes). These holes are caused by cationic defects in the structure of chalcopyrite.     

Complex formation of dimeric cyclophane zinc diphenylporphyrinates with 1,4-diazabicyclo[2,2,2]octane and pyrazine

The formation of host-guest complexes between dimeric cyclophane zinc diphenylporphyrinates and bidentate ligands of different nature containing two nitrogen atoms has been studied by the spectrophotometric titration method and ¹H NMR spectroscopy in a toluene-methanol (2: 1) binary solvent. The complexation of these dimeric porphyrinates with 1,4-diazabicyclo[2,2,2]octane or pyrazine can lead to 1: 1 or 1: 2 complexes, depending on the metalloporphyrin-to-ligand molar ratio. The stability constants of the porphyrinate-ligand complexes and concentration ranges of their formation have been determined.     

Structure–activity studies on the fungitoxicity of some triorganotin(IV) compounds

Seventeen triorganotin(IV) compounds, with the general formula R₃SnX, containing symmetrical and unsymmetrical combinations of alkyl and aryl groups on tin and with a wide variation in the non-carbon-bonded anionic (X) residues, were examined along with three formally pentacoordinated adducts of triaryltin chlorides with triphenylphosphine oxide for their antifungal activity against nine plant pathogenic and saprophytic fungi. The in vitro tests included inhibitory studies on radial growth, mycelial growth, spore germination, and germ tube elongation. A significant finding was the dependence of fungitoxicity on the nature of the X group in both the tributyltin and triaryltin series, in contrast to earlier published reports on the negligible influence of the X groups on overall toxicity relative to the R group. This suggests that the X group is significantly involved in transporting the biocide to the reactive sites, and that the X group which tends to confer increased solubility to the triorganotin compound gives rise to increased activity. In studies of R group variations, tri-iso-butyltin bromide was found to be much less fungitoxic than tri-n-butyltin compounds, a result which is reconcilable in terms of increased steric encumbrance at the tin site in the former case. The steric factor is also implicated in the reduced activities observed for tris(p-tolyl)tin and tris(p-chlorophenyl)tin compounds relative to (Ph₃SnX) towards most of the fungi screened in this study. In general, it was also noted that the triaryltins were more selective in their antifungal action than the trialkyltins, which exhibited broad spectral activity when applied at the concentration level of 10 μg cm^?3.