Diaminocarbene- and Fischer-carbene complexes of palladium and nickel by oxidative insertion: preparation, structure, and catalytic activity

Oxidative insertion of [Pd(PPh3)4] or [Ni(cod)2]/PPh3 into the C-Cl bond of various 2-chloroimidazolinium- and other -amidinium salts affords metal-diaminocarbene complexes in good to excellent yields. This procedure is complementary to existing methodology in which the central metal does not change its oxidation state, and therefore allows to incorporate carbene fragments that are difficult to access otherwise. The preparation of a variety of achiral as well as enantiomerically pure, chiral metal-NHC complexes (NHC = N-heterocyclic carbene) and metal complexes with acyclic diaminocarbene ligands illustrates this aspect. Furthermore it is shown that oxidative insertion also paves a way to prototype Fischer carbenes of Pd(II). Since the required starting materials are readily available from urea- or thiourea derivatives, this novel approach allows for substantial structural variations of the ligand backbone. The catalytic performance of the resulting library of nickel- and palladium-carbene complexes has been evaluated by applications to prototype Suzuki-, Heck-, and Kumada-Corriu cross-coupling reactions as well as Buchwald-Hartwig aminations. It was found that even Fischer carbenes show appreciable catalytic activity. Moreover, representative examples of all types of neutral and cationic metal-carbene complexes formed in this study have been characterized by X-ray crystallography.     

Thiol‐ene photopolymerization for efficient curing of vinyl esters

Monomers for radical photopolymerization based on vinyl esters (VEs) have recently been identified as suitable alternatives to (meth)acrylates on account of their low irritancy and cytotoxicity. The drawback of most VEs with abstractable hydrogens is their relatively low reactivity compared with (meth)acrylates. Within this article, we proved by photo‐differential scanning calorimetry measurements and real‐time Fourier transform infrared spectroscopy that the thiol‐ene concept is able to improve the photoreactivity of these VEs to a large extent to a level between those of acrylates and methacrylates. Other VEs have now a reactivity of at least the level of similar acrylates. Mechanical properties as determined by Dynamic Mechanical Analysis and Charpy impact tests showed significant toughening of these materials. Furthermore, we were able to confirm low toxicity of all components by osteoblast cell culture experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polymers for medical uses

An increasing demand for biomaterials corresponds to the deficiency in the knowledge on biocompatibility. To increase this knowledge the modification of polymer surfaces, their characterization, and the investigation of the response of the biosystem is considered to be a suitable approach. Surface modification may be performed in the wet-chemical way (heterogeneous reaction) or by means of treatment with a suitable plasma (glow discharge). Surface sensitive methods such as X-ray photoelectron spectroscopy, infrared spectroscopy in the attenuated total reflexion mode as well as surface energy measurements are useful for surface characterization. To determine the bioresponse to the polymer surface, enzyme-linked immunosorbent assays, cell growth and full blood tests may be used. In the present paper several systems are described with respect to their surface modification, characterization, and bioresponse. It is shown that the protein adsorption is triggered by the surface, that SO₂ plasma treatment enhances cell growth and that there seems to be a biocompatibility window for a surface characterized by a ξ-potential between −4 and −8 mV and a ratio of dispersive to polar contributions of surface energy around 12. It is stressed, however, that the final solution for a biomaterial is a material which, in the course of degradation, constantly presents a new biocompatible surface.     

Diffusion of Gold Nanoparticles in Inverse Opals Probed by Heterodyne Dynamic Light Scattering

The diffusive behavior of nanoparticles inside porous materials is attracting a lot of interest in the context of understanding, modeling, and optimization of many technical processes. A very powerful technique for characterizing the diffusive behavior of particles in free media is dynamic light scattering (DLS). The applicability of the method in porous media is considered, however, to be rather difficult due to the presence of multiple sources of scattering. In contrast to most of the previous approaches, the DLS method was applied without ensuring matching refractive indices of solvent and porous matrix in the present study. To test the capabilities of the method, the diffusion of spherical gold nanoparticles within the interconnected, periodic nanopores of inverse opals was analyzed. Despite the complexity of this system, which involves many interfaces and different refractive indices, a clear signal related to the motion of particles inside the porous media was obtained. As expected, the diffusive process inside the porous sample slowed down compared to the particle diffusion in free media. The obtained effective diffusion coefficients were found to be wave vector-dependent. They increased linearly with increasing spatial extension of the probed particle concentration fluctuations. On average, the slowing-down factor measured in this work agrees within combined uncertainties with literature data.

     

Post-polymerization modification of aromatic polyimides via Diels-Alder cycloaddition

We report a facile post-polymerization modification route to functionalized aromatic polyimides via Diels-Alder cycloaddition. Aromatic polyimides are important, versatile high-performance polymers; however, their structural diversity is restricted by the requirements of the step-growth polymerization. We prepared polyimides with alkynes in their main-chain as macromolecular dienophiles and quantitatively grafted tetraphenylcyclopentadienone based dienes. The resulting solution-processable, wholly aromatic polyimides show a considerable increase in surface area due to the induced conformational changes and bulky, rigid, and contorted molecular structures. The orthogonality of the reaction is exploited to insert functional groups, namely bromine and sulfonates, along the polymer backbone. In a further extension, the phenylene segments undergo cyclodehydrogenation to form nanographene segments within the polymer chains. The Diels-Alder cycloaddition onto polyimides is therefore demonstrated to be an effective, widely applicable route to tunable high-performance polymers with value-added functionality and thus considerable potential in a wide range of advanced materials.     

The neutral cluster amminehexa‐μ2‐chlorido‐μ4‐oxido‐tris(1,4,6‐triazabicyclo[3.3.0]oct‐4‐ene)tetracopper(II)

The title compound, [Cu₄Cl₆O(C₅H₉N₃)₃(NH₃)], is a neutral conformationally chiral cluster which crystallizes under the conditions described in this paper as a racemic conglomerate. It contains four Cu^II atoms in a tetrahedral coordination with a central O atom lying on a crystallographic threefold axis. Six chloride anions bridge the four Cu^II atoms. Three Cu^II atoms are bound by an N atom of a monodentate 1,4,6‐triazabicyclo[3.3.0]oct‐4‐ene (Htbo) ligand and the remaining Cu^II atom is bound by a terminal ammine ligand. The geometry at each copper center is trigonal bipyramidal, produced by the bound N atom of Htbo or ammonia, the O atom in the axial position, and three chloride ions in the equatorial plane. The chloride anions form an octahedron about the oxygen center. The copper–ammonia bond lies along the crystallographic threefold axis, along which the molecules are packed in a polar head‐to‐tail fashion.     

Hexaphyrin(1.0.1.0.0.0). A new colorimetric actinide sensor

Hexaphyrin(1.0.1.0.0.0) (isoamethyrin) undergoes a significant color change in the presence of UO₂²⁺, PuO₂²⁺, and NpO₂²⁺. The complexation of the first of these dioxo actinide cations was studied in semi-quantitative fashion in 1:1 MeOH-CH₂Cl₂. Under these conditions, the detection limit for UO₂²⁺ was found to be ca. 5.8 ppm by naked eye monitoring and <28 ppb by UV-vis spectroscopy. Isoamethyrin does not undergo a color change in the presence of most transition metals or when exposed to Gd(III). Isoamethyrin thus constitutes an attractive alternative to 2,2′(1,8-dihydroxy-3,6-disulfonaphthylene-2,7-bisazo)-bisbenzenarsonic acid (AzIII) and 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol (BrPADAP), systems currently used as actinide cation sensors.     

Nanoparticle directed domain orientation in thin films of asymmetric block copolymers

We investigated the thin film morphology of two different asymmetric block copolymers (BCP), polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) and poly(n-pentyl methacrylate)-block-poly(methyl methacrylate) (PPMA-b-PMMA), loaded with pre-synthesized iron oxide nanoparticles (NP). The chemical composition of the BCP constituents determines the strength of the interaction between polymer chains and nanoparticles. In the case of NP/PS-b-P4VP system, the nanoparticles interact preferentially with the P4VP block and hence localize selectively in the P4VP cylindrical microdomains. However, for the NP/PPMA-b-PMMA system, the nanoparticles have no significant preference for the copolymer blocks and segregate at the polymer/substrate interface. Interestingly, this changes the effective substrate surface energy and hence leads to a remarkable change in domain orientation from parallel to perpendicular with respect to the substrate. These results clearly demonstrate the importance of both enthalpic and entropic factors which determine spatial distribution of NP in BCP films and influence domain orientation.