1H and 19F ultra-fast MAS double-quantum single-quantum NMR correlation experiments using three-spin terms of the dipolar homonuclear Hamiltonian

Measuring internuclear distances through dipolar interaction is a major challenge for solid-state nuclear magnetic resonance (NMR) spectroscopy. Obtaining reliable interatomic distances provides an access to the local structure in ordered or disordered solids. We show that at magic angle spinning (MAS) frequencies larger than ca. 50 kHz, some of the three-spin terms of the homogeneous homonuclear dipolar Hamiltonian can be used to promote the creation of double-quantum coherences between neighbouring (1)H or (19)F spins without using dipolar recoupling pulse sequences in the Dipolar Homonuclear Homogeneous Hamiltonian (DH(3)) double-quantum/single-quantum correlation experiment. This makes it possible to probe inter-nuclear spatial proximity with limited risk of probe or sample damage from radio-frequency (RF) irradiation, and is fully appropriate for fast repetition rate offering sensitivity gains in favourable cases. Experimental demonstrations are supported by multi-spin numerical simulations, which points to new possibilities for the characterization of spin-system geometries.     

Thermal and electrochemical C-X activation (X = Cl,Br, I) by the strong Lewis acid Pd3(dppm)3(CO)2+ cluster and its catalytic applications

The stoichiometric and catalytic activations of alkyl halides and acid chlorides by the unsatured Pd(3)(dppm)(3)(CO)(2+) cluster (Pd(3)(2+)) are investigated in detail. A series of alkyl halides (R-X; R = t-Bu, Et, Pr, Bu, allyl; X = Cl, Br, I) react slowly with Pd(3)(2+) to form the corresponding Pd(3)(X)(+) adduct and "R(+)". This activation can proceed much faster if it is electrochemically induced via the formation of the paramagnetic species Pd(3)(+). The latter is the first confidently identified paramagnetic Pd cluster. The kinetic constants extracted from the evolution of the UV-vis spectra for the thermal activation, as well as the amount of electricity to bring the activation to completion for the electrochemically induced reactions, correlate the relative C-X bond strength and the steric factors. The highly reactive "R(+)" species has been trapped using phenol to afford the corresponding ether. On the other hand, the acid chlorides react rapidly with Pd(3)(2+) where no induction is necessary. The analysis of the cyclic voltammograms (CV) establishes that a dissociative mechanism operates (RCOCl --> RCO(+) + Cl(-); R = t-Bu, Ph) prior to Cl(-) scavenging by the Pd(3)(2+) species. For the other acid chlorides (R = n-C(6)H(13), Me(2)CH, Et, Me, Pr), a second associative process (Pd(3)(2+) + RCOCl --> Pd(3)(2+.....)Cl(CO)(R)) is seen. Addition of Cu(NCMe)(4)(+) or Ag(+) leads to the abstraction of Cl(-) from Pd(3)(Cl)(+) to form Pd(3)(2+) and the insoluble MCl materials (M = Cu, Ag) allowing to regenerate the starting unsaturated cluster, where the precipitation of MX drives the reaction. By using a copper anode, the quasi-quantitative catalytic generation of the acylium ion ("RCO(+)") operates cleanly and rapidly. The trapping of "RCO(+)" with PF(6)(-) or BF(4)(-) leads to the corresponding acid fluorides and, with an alcohol (R'OH), to the corresponding ester catalytically, under mild conditions. Attempts were made to trap the key intermediates "Pd(3)(Cl)(+)...M(+)" (M(+) = Cu(+), Ag(+)), which was successfully performed for Pd(3)(ClAg)(2+), as characterized by (31)P NMR, IR, and FAB mass spectrometry. During the course of this investigation, the rare case of PF(6)(-) hydrolysis has been observed, where the product PF(2)O(2)(-) anion is observed in the complex Pd(3)(PF(2)O(2))(+), where the substrate is well-located inside the cavity formed by the dppm-Ph groups above the unsatured face of the Pd(3)(2+) center. This work shows that Pd(3)(2+) is a stronger Lewis acid in CH(2)Cl(2) and THF than AlCl(3), Ag(+), Cu(+), and Tl(+).     

Mild electrophilic trifluoromethylation of beta-ketoesters and silyl enol ethers with 5-trifluoro methyldibenzothiophenium tetrafluoroborate

Cyclic and acyclic beta-ketoesters were efficiently trifluoromethylated with 5-trifluoromethyldibenzothiophenium tetrafluoroborate in the presence of a phase-transfer catalyst to afford the corresponding alpha-substituted alpha-trifluoromethyl beta-ketoesters in good to excellent yields. In a second approach, 5-trifluoromethyldibenzothiophenium tetrafluoroborate and tetrabutylammonium difluorotriphenylstannate were used for efficient electrophilic trifluoromethylation of various silyl enol ethers leading to the corresponding alpha-trifluoromethyl ketones in good to high yields.     

A general approach toward the synthesis of 8-acylamidopyrazolo[1,5-a]-1,3,5-triazines

An expedient synthesis of 8-acylamidopyrazolo[1,5-a]-1,3,5-triazines was developed by treating 8-amino-4-[N-(4-aminophenyl)-N-(methyl)amino]pyrazolo[1,5-a]-1,3,5-triazine with various acyl chlorides following by the displacement of the so-formed N-(methyl)-N-[4-(acylamido)phenyl]amino leaving group with various amines. Applications to high-throughput synthesis are suggested.     

Effects of substituted ligands on the mobility of complexed anions

From conductance and viscosities measurements on Pr₄NCl, Et₄NBr, and AgNO₃ in acetonitrile and Et₃NBr in nitrobenzene, the Walden products of the anion at infinite dilution were determined in presence of various concentrations of substituted benzoic acids. From these data it was possible to compute the values of the Walden products of the once complexed anions and to estimate the order of magnitude of the Walden products of twice complexed anions. Stokes' law is not obeyed, and the Walden products are not proportional to the third root of the molar volume of the complexed ions, as a consequence of their lack of sphericity. The assumption that the drag force which acts on the ions is proportional to the volume of the substituents results in a linear expression between the reciprocals of the Walden products and the molar volume of the ligands. The experimental results fit this expression within the limits of the experimental errors, and the slopes of the lines are nearly the same for all the anions and for the two solvents studied here, namely, 2.5×10^–4 ohm-cm^–5 mole-cP^–1.     

Immunoassay for native enzyme quantification in biological samples

In order to detect low levels of enzyme activity, specifically glucose oxidase, in biological samples, an immunoenzymatic assay was developed since currently available methods could not be used because of either their lack of sensitivity or the conditions prevailing in our samples: turbidity of the medium, presence of redox systems other than glucose oxidase, and high concentration of proteins. The principle of the method is to coat a polystyrene surface with a fragment Fc-specific anti-IgG, then with an antibody directed against the looked-for enzyme, which is simultaneously the antigen and the enzyme activity required for immunoenzymatic detection. We applied this concept to biological samples after glucose oxidase administration to mice. This method achieves specificity and sensitivity (20 ng/mL or 1 ng) with samples of biological origin. No marker is needed since the antigen itself possesses an enzyme activity. This method, which requires a small sample volume (50 ΜL, 20 ΜL, if necessary), can be extended easily to the many enzymes currently used as markers. It could also be applied to the native enzymes of medical interest for which antibodies and a colorimetric reaction are available.     

SELECTIVE DEGRADATION OF AMINO ACIDS PHOTOSENSITIZED BY TRYPTOPHAN IN POLYPEPTIDE STRUCTURES

Polypeptides containing a basic amino acid close to their single tryptophan residue were irradiated with monochromatic 302 nm radiation. Tryptophan photolysis was monitored by absorption and fluorescence spectroscopy. Amino acid loss was evaluated by amino acid analysis. Only the protonated residues adjacent to tryptophan in the sequence were destroyed upon tryptophan excitation. This reaction is probably due essentially to direct interaction between the excited tryptophan and the neighbouring residue without electron solvation.     

Phase equilibrium measurements for semi-clathrate hydrates of the (CO2 + N2 + tetra-n-butylammonium bromide) aqueous solution system

The application of semi-clathrate hydrate formation technology for gas separation purposes has gained much attention in recent years. Consequently, there is a demand for experimental data for relevant semi-clathrate hydrate phase equilibria. In this work, semi-clathrate hydrate dissociation conditions for the system comprising mixtures of {CO₂ (0.151/0.399 mole fraction) + N₂ (0.849/0.601 mole fraction) + 0.05, 0.15, and 0.30 mass fraction tetra-n-butylammonium bromide (TBAB)} aqueous solutions have been measured and are reported. An experimental apparatus which was designed and built in-house was used for the measurements using the isochoric pressure-search method. The range of conditions for the measurements was from 277.1 K to 293.2 K for temperature and pressures up to 16.21 MPa. The phase equilibrium data measured demonstrate the high hydrate promotion effects of TBAB aqueous solutions.     

Finite element and sensitivity analysis of thermally induced flow instabilities

This paper presents a finite element algorithm for the simulation of thermo‐hydrodynamic instabilities causing manufacturing defects in injection molding of plastic and metal powder. Mold‐filling parameters determine the flow pattern during filling, which in turn influences the quality of the final part. Insufficiently, well‐controlled operating conditions may generate inhomogeneities, empty spaces or unusable parts. An understanding of the flow behavior will enable manufacturers to reduce or even eliminate defects and improve their competitiveness. This work presents a rigorous study using numerical simulation and sensitivity analysis. The problem is modeled by the Navier–Stokes equations, the energy equation and a generalized Newtonian viscosity model. The solution algorithm is applied to a simple flow in a symmetrical gate geometry. This problem exhibits both symmetrical and non‐symmetrical solutions depending on the values taken by flow parameters. Under particular combinations of operating conditions, the flow was stable and symmetric, while some other combinations leading to large thermally induced viscosity gradients produce unstable and asymmetric flow. Based on the numerical results, a stability chart of the flow was established, identifying the boundaries between regions of stable and unstable flow in terms of the Graetz number (ratio of thermal conduction time to the convection time scale) and B, a dimensionless ratio indicating the sensitivity of viscosity to temperature changes. Sensitivities with respect to flow parameters are then computed using the continuous sensitivity equations method. We demonstrate that sensitivities are able to detect the transition between the stable and unstable flow regimes and correctly indicate how parameters should change in order to increase the stability of the flow. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of side‐chain‐substituted ifosfamide analogs

Three analogs of the cytostatic drug ifosfamide incorporating 1‐methyl‐2‐chloroethyl side chains were designed and prepared as an attempt to obtain drugs of lower toxicity.