Electro-optic size effects and effects of nonlinear saturation in PLZT ceramics

Results of studying electro-optic size effects and nonlinear electro-optic effects in ferroelectric PLZT ceramics are presented. It is established that the presence of electro-optic size effects makes microvolume samples of PLZT ceramics promising for designing efficient modulating devices.     

Effect of nickel coating on electrochemical performance of graphite anodes for lithium ion batteries

Among the different materials often studied and proposed as negative electrodes for lithium-ion batteries, graphite anodes are the most used in commercial batteries. For this study, synthetic graphite was tested. During the first discharge 0.2 Li ions were consumed for the formation of the SEI film and the capacity reaches about 387 mAh/g. But at the end of the first charge only 72% of the initial charge was recovered (the reversible capacity is about 279 mAh/g). In order to improve this performance we have deposited metallic nickel on graphite with the intention to obtain a homogeneous thin layer able to modify the nature of the SEI film, to allow the diffusion of lithium ions through the protective layer, and also to increase the performance of graphite electrodes. The results show a decrease of the irreversible capacity loss (16% instead of 28% for pure graphite electrodes) as well as better cycleability for a nickel-deposited graphite electrode with only 11% weight ratio of nickel. On the other hand, an increase of the nickel content decreases this performance.     

Fundamentals of the direct measurement of sound intensity and practical applications

Sound intensity is a measure of the magnitude and direction of the flow of sound energy. Developments in sound intensity measurement capabilities in the last quarter century have occurred because of several reasons. The main ones include the derivation of the cross-spectral formulation for sound intensity and developments in digital signal processing. This paper begins with a brief historical introduction of sound intensity measurements. Then elementary theory for sound intensity is presented. A section on sound intensity measurements is then included. The next section of the paper discusses sources of measurement error; the major sources of error are described in some detail. The paper continues with a discussion of the main applications of sound intensity measurements: sound power determination, noise source identification, and transmission loss measurements. The paper concludes with a discussion of ISO and ANSI intensity related standards and relevant references.     

Elastic scattering of slow positrons on atoms

The results of calculations of the elastic scattering cross section of positrons on noble gas and alkali atoms are presented. The calculations are performed within the one-electron Hartree-Fock approximation with multielectron correlations in the so-called random phase approximation with exchange taken into account. Virtual positronium formation is taken into account and proved to be very important. Arguments are presented that the positron polarization potential is repulsive for alkali atoms. The results obtained are in a reasonable agreement with experiment and with some previously reported calculations.     

effect of surface modification on the properties of hydrogen-sensitive GaAs-based Schottky diodes

The surface of hydrogen-sensitive GaAs Schottky diodes is modified by nonpolishing etching and by producing quantum wells and quantum dots in the space-charge region of the semiconductor. The sensitivity to hydrogen is found to increase by a factor of 8–37 after the etching and by two or three orders of magnitude after the introduction of quantum wells and dots. It is shown that the increased sensitivity is associated with the lowering of the barrier at the Pd/GaAs interface, the retardation of hydrogen diffusion into GaAs due to the presence of strained quantum-size layers, and an increase in the recombination current. The presence of the recombination component is supported by luminescence from the quantum wells and quantum dots, as well as from the GaAs substrate. The etch composition is shown to be a decisive factor in raising the sensitivity.     

Radiative lifetimes in Ce I and Ce II

New radiative lifetime measurements based on time-resolved laser-induced fluorescence techniques are reported for 18 even-parity levels belonging to the 4f5d^26p and 4f ²5d ² configurations of Ce I and 6 even-parity levels belonging to the 5d^26s, 4f5d6p, and 4f6s6p configurations of Ce II. Free neutral and singly ionized cerium atoms were produced by laser ablation. The Ce I and Ce II levels range in energy from 26 545 to 29 102 cm^-1, and 42 573 to 48 152 cm^-1, respectively. Received 25 September 2002 Published online 4 March 2003     

Förster energy transfer from poly(arylene–ethynylene)s to an erbium–porphyrin complex

We study the infrared emission at 1.54 μm of an organolanthanide complex, Er(III)-tetraphenylporphyrin [Er(TPP)acac], both as a result of direct optical excitation and via energy transfer from host π-conjugate polymers of type poly(arylene–ethynylene) [PAE]. In the first case, the emission of the neat complex is characterized in inert transparent materials and a value of the quantum yield at 1.54 μm φ_IR=4×10⁻⁴ is measured. Then, fluorescence resonance transfer is investigated in blends of Er(TPP)acac with PAEs by monitoring the quenching of the polymer fluorescence along with the enhancement of both the visible emission of the ligand and the near-infrared band of Er³⁺. These different procedures allow a detailed analysis of the transfer efficiency within a specific implementation of the Förster model for polymeric donors. The experimental values of the critical radius R₀, ranging from 1.3 to 2.5 nm for the different blends, are in good agreement with theory for a wide interval of the physical and spectroscopic parameters. This suggests that other mechanisms for excitation transfer do not play a significant role in these materials.     

Ordered states and structural transitions in a system of Abrikosov vortices with periodic pinning

A system of Abrikosov vortices in a quasi-two-dimensional HTSC plate is considered for various periodic lattices of pinning centers. The magnetization and equilibrium configurations of the vortex density for various values of external magnetic field and temperature are calculated using the Monte Carlo method. It is found that the interaction of the vortex system with the periodic lattice of pinning centers leads to the formation of various ordered vortex states through which the vortex system passes upon an increase or a decrease in the magnetic field. It is shown that ordered vortex states, as well as magnetic field screening processes, are responsible for the emergence of clearly manifested peaks on the magnetization curves. Extended pinning centers and the effect of multiple trapping of vortices on the behavior of magnetization are considered. Melting and crystallization of the vortex system under the periodic pinning conditions are investigated. It is found that the vortex system can crystallize upon heating in the case of periodic pinning.     

cos πρ theorems for δ-subharmonic functions

For ϕ a δ-subharmonic function, sharp results are obtained that connectA(r, ϕ), B(r, ϕ) andT(r, ϕ), whereA(r, ϕ)=inf_|z|=r ϕ(z),B(r, ϕ)=sup_|z|=r ϕ(z), andT(r, ϕ) is the Nevanlinna characteristics.