Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

New approach to processing of chlorine-containing wastes: Synthesis of 2,3-dichloropropene from 1,2,3-trichloropropane

Possibilities of utilization of by-products formed in manufacture of epichlorohydrin are considered. A promising way to utilize wastes from production of epichlorohydrin by synthesis of 2,3-dichloropropene from 1,2,3-trichloropropane is suggested.     

Condensate formation and vortex generation in Bose gas upon cooling

The mechanism of transition of a Bose gas to the superfluid state via thermal fluctuations under the condition of external cooling at a temperature above the transition point is considered. The probability of formation of such critical fluctuations (instantons) is calculated; it is found that this probability increases as the system approaches the transition temperature. It is shown that the evolution of an individual instanton is impossible without the formation of vortices in its superfluid part.     

Hybrid numerical—experimental approach for investigation of dynamics of microcantilever relay system

The time average holography measurements of the vibrating microelectromechanical switch (MEMS) were performed in this study. Experimental measurement results exhibit good agreement with computer generated holographic interferogram analysis. The validation of experimental investigations versus numerical analysis provides the necessary background to analyze the dynamical characteristics of micromechanical systems in virtual numerical environments. Direct application of fringe counting techniques for reconstruction of motion from time average holograms cannot be straightforward if the analyzed micromechanical systems contain motion limiters. Modifications of a classical time average holographic technique enable qualitative analysis of MEMS and can be applied for investigation of dynamical properties of much broader classes of MEMS systems.     

Closed-form solutions for a rectangular layer with central crack under anti-plane shear stress

We consider the problem of determining the stress distributionin a finite rectangular elastic layer containing a Griffithcrack which is opened by internal shear stress acting alongthe length of the crack. The mode III crack is assumed to belocated in the middle plane of the rectangular layer. The followingtwo problems are considered: (A) the central crack is perpendicularto the two fixed lateral surfaces and parallel to the othertwo stress-free surfaces; (B) all the lateral surfaces of therectangular layer are clamped and the central crack is parallelto the two lateral surfaces. By using Fourier transformations,we reduce the solution of each problem to the solution of dualintegral equations with sine kernels and a weight function whichare solved exactly. Finally, we derive closed-form expressionsfor the stress intensity factor at the tip of the crack andthe numerical values for the stress intensity factor at theedges of the cracks are presented in the form of tables.     

Reaction of 3,3,3-trifluoropropene-1 with bromoform and methylene bromide

The radical telomerization of 3,3,3-trifluoropropene with bromoform and methylens bromide has been studied. The nature of the products with bromoform depends substantially on the method of initiation. In the presence of Fe(CO)₅ + DMF, telomers of CHBr₂(CH₅₂CHCF₃)_nBr are formed, while with initiation with benzoyl peroxide other compounds are also formed that contain two, three, or four bromine atoms per molecule. To elucidate the formation of these products a reaction scheme is proposed that involves rearrangement of CHBr₂CH₂CH(CF₃)CH₃CHCF₃ radicals to CBr₂CH₂CH(CF₃)CH₂CH₂CF₃ radicals.Deceased.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2558–2562, November, 1989.     

Electrohydrodynamic instability in some nematic cyanobiphenyls in an a.c. electric field

Electrohydrodynamic instability in homeotropically oriented nematic samples of 4'-n-octyl-4-cyano-biphenyl and 4'n-alkyloxy-4-cyanobiphenyl, (n = 8.9) have been studied in an a.c. electric field. The domain patterns during the instability in these compounds in a very low frequency a.c. field are very similar to those in a d.c. field. The domain patterns observed at higher frequencies have been identified as 'maltese crosses' or 'crossed isogyres'. The electro-convective 'isotropic' flows near the electrode play an important role in the observed instability.     

Combined supercritical-fluid chromatography/mass spectrometry in the analysis of diuron in plasma using on-line phase-system switching

On-line sample pretreatment by means of the phase-system switching approach is an interesting technique for the analysis of aqueous samples, e.g., plasma, by means of supercritical-fluid chromatography. In order to analyse plasma samples the following analytical procedure is used. The plasma sample is injected on to a short precolumn, which is washed with water and subsequently dried with nitrogen. Next, the solutes are desorbed with the supercritical mobile phase, analysed with packed-column supercritical-fluid chromatography and detected with either a UV detector or a mass spectrometer, equipped with a moving-belt interface. The herbicide diuron is selected as a test compound to study the feasibility of this approach. Using a selective detector the procedure is sufficiently sensitive to detect diuron in plasma, but not appropriate to detect the diuron metabolites in a post-mortem plasma sample. These have been identified with liquid chromatography/mass spectrometry. The detection limit of diuron in plasma using the procedure described is about 30 ng/mL.     

An interpretation of cortical maps in echolocating bats

Target parameters such as reflectivity, range, velocity, and angular position are represented by ordered maps of tuned cortical neurons in insectivorous bats. It is suggested that the response of each neuron in such a map is determined by a hypothesis test conditioned on a particular value of the mapped parameter. The excitation of each neuron is then interpreted as a sample value of a conditional log-likelihood ratio or a log-likelihood function. Interpolation between the samples, which is needed to find the parameter that maximizes the mapped function (e.g., the maximum likelihood parameter estimate), can be accomplished with overlapped tuning curves. An attempt to portray a sharp peak by a weighted sum of relatively broad neuronal tuning curves or interpolation functions results in excitatory center/inhibitory surround behavior. Facilitation or antifacilitation of neurons that are likely to be excited by succeeding observations can be used for sequential detection and tracking. Interpolation and pulse-to-pulse data storage capability are required to explain range jitter sensitivity and to allow for moving target indication in bat sonar. If a cortical map represents an ordered array of hypothesis tests, then many such tests are implemented in parallel when target parameters are unknown. Detection performance is then degraded relative to the idealized situation in which all parameters are specified. Performance in noise may thus appear to be much worse than that of an ideal detector, even if each hypothesis test is optimally implemented.