In situ prepared polypyrrole for low humidity QCM sensor and related theoretical calculation

In situ preparation of polypyrrole (Ppy) by photo-polymerization coated on a quartz crystal microbalance (QCM) as a low humidity sensor was reported. Different concentrations of Ppy films say 0 wt.% (as blank), 0.1, 1, and 10 wt.% were investigated to measure humidity concentrations between 14.7 and 5412.5 ppm_v. The adsorption/desorption behavior was also examined at humidity concentration 510.2 ppm_v. The sensitivities of 0, 0.1 and 1 wt.% Ppy films at 51.5 ppm_v were 0.143, 0.219 and 0.427, respectively. For 1 wt.% Ppy, the highest sensitivity was obtained. The slope and correlation coefficients (R²) for 1 wt.% Ppy at the ranges of 14.7–898.6 ppm_v were 0.0646 and 0.9909, respectively. A series of molecular simulations have been carried out to calculate bond energy for the water molecule interaction with Ppy, which was found to be 3 kcal/mol indicating the existence of hydrogen bonding during the sorption process. Based on Langmuir isotherm adsorption assumption, for 0.1 and 1 wt.% Ppy films, the association constants were 2606.30 and 5792.98, respectively. This larger association constant for 1 wt.% Ppy film explains higher sensitivity.     

气相色谱中测定死时间的Grobler－Balizs法和Ambrus法的比较

经理论推导和实验数据验证，证明测定死时间的Ｇｒｏｂｌｅｒ－Ｂａｌｉｚｓ法和Ａｍｂｒｕｓ法是同一的。     

High performance organic field-effect transistors based on amphiphilic tris(phthalocyaninato) rare earth triple-decker complexes

LB films of three amphiphilic tris(phthalocyaninato) rare earth triple-decker complexes with crown-ethers as hydrophilic heads and long alkyl chains as hydrophobic tails have been prepared and found to display very well ordered layer structures, as proved by pi-A isotherms, UV-vis and polarized absorption spectra, X-ray diffraction experiments, and microscopic morphology characterization. These LB films have been fabricated into field-effect transistor (FET) devices, which show carrier mobilities as high as 0.24-0.60 cm2 V-1 s-1, among the highest mobilities achieved thus far for all LB film-based OFETs.     

Theoretical study of addition reactions of heavy carbenes to carbon and boron nitride nanotubes

In an effort to gain insight into the activation energies and reaction enthalpies of the chemical functionalization of carbon and boron nitride nanotubes, calculations using density functional theory have been carried out for the cycloaddition of a heavy carbene to a single-walled carbon (SWCNT; C(130)H(20)) and a boron nitride (SWBNNT; B(65)N(65)H(20)) nanotube. The (CH(3))(2)X + SWCNT and (CH(3))(2)X + SWBNNT (X = C, Si, Ge, Sn, and Pb) reactions are the subject of the present study. All the stationary points were determined at the B3LYP/LANL2DZ level of theory. The major conclusions that can be drawn from this work are as follows: (i) Considering both the activation barrier and reaction enthalpy based on the model calculations presented here, it is found that the order of (CH(3))(2)X reactivity is X = C > Si > Ge > Sn > Pb, irrespective of whether cycloaddition is to a SWCNT or a SWBNNT sidewall. That is to say, (CH(3))(2)C and (CH(3))(2)Si can readily add to the sidewalls of SWCNT and SWBNNT, whereas (CH(3))(2)Ge, (CH(3))(2)Sn, and (CH(3))(2)Pb are unreactive. (ii) Since the chemical reactivities of SWCNT and SWBNNT sidewalls closely resemble those of the small C(16)H(10) and B(8)N(8)H(10) molecules, at least in a qualitative sense, the use of the above small molecules as models is sufficient to provide qualitatively correct results. (iii) Our theoretical observations indicate that all the (5,5) SWCNT and SWBNNT cycloadducts favor opened rather than closed three-membered ring structures. (iv) The theoretical investigations demonstrate that the singlet-triplet splitting of the carbene species (R(2)X) as well as that of the small model molecules can be used as a diagnostic tool to predict the addition reactivities of carbene analogues and sidewalls of various nanotubes, respectively. Moreover, the results obtained in this work allow a number of predictions to be made.     

Dynamic ultrasound-assisted extraction of polyphenols in tobacco

A novel extraction method, namely dynamic ultrasound-assisted extraction, is investigated. This technique is efficient with respect to both time and solvent consumption because it utilizes ultrasonic energy in dynamic mode during extraction. Polyphenols (chlorogenic acid, esculetin, rutin, scopoletin, and quercitrin) are extracted from a tobacco (Nicotina tobaccum L.) sample for 10 min with 6 mL of solvent. Fresh solvent is continuously pumped through the sample, with which the analytes can be rapidly extracted, and the possibility of degradation efficiently avoided. Methanol involving 0.5% w/v ascorbic acid was used as extraction solvent; optimal flow rate and extraction time were investigated. The extract was cleaned up by C18 disposable cartridge. The spiked and nonspiked tobacco samples were used for the evaluation of the proposed method. Recoveries obtained were varied from 96 to 108% and RSDs from 2.0 to 4.6%. This extraction technique was revealed to recover larger amounts of polyphenols from tobacco, compared to the static ultrasound-assisted extraction method.     

固相配位化学反应研究 L ⅩⅩⅢ.等温电导法研究醋酸锰和草酸的室温固相化学反应

本文利用等温电导法考察了醋酸锰和草酸的室温固相配位化学反应的制样方法对实验结果的影响，并获得了该反应的动力学参量。     

羟基化合物及其葡醛酸苷化学结构与RP—HPLC保留行为相关性研究

采用体外孵育生物合成方法获得羟基化合物葡醛酸苷系列化合物，并对其反相高效液相色谱保留行为及底物与其葡醛酸结合物保留行为相关性进行了研究，建立了相应的结构－色谱保留行为相关性方程及葡醛酸苷类代谢物保留行为的预测方法。将ＱＳＲＲ研究扩展到药物代谢物领域，对药物Ⅱ相葡醛酸化代谢产物的ＨＰＬＣ分析提供了帮助。     

Application of capillary electrophoretic immunoassay to analysis of estradiol in women's serum

Summary A rapid and sensitive capillary electrophoretic immunoassay is described for determination of estradiol in women's serum. Addition of thermally reversible hydrogel in the buffer, serving as a replaceable packing material, improved the reproducibility of the method. Using a laser-induced fluorescence detector this method can be applied to the determination of estradiol at concentrations as low as 30.6 pg mL¹. Estradiol levels in 16 normal women's serum were measured at the range 115≈370 pg mL¹. The results of this method have been found to correlate well with those of chemiluminescent immunoassay.