Ferroelectric polarization switching in nylon-11

Cold-drawn Nylon-11 films, which were prepared by stretching the melt-quenched films to a draw ratio of 2.8: 1 at room temperature, were found to exhibit an electric displacement versus electric field hysteresis loop. The results confirmed that the Nylon-11 film exhibited ferroelectric behavior at or below room temperature. The coercive fields were 65, 98, 125, 160, and 215 MV/m at 20, 0, ?20, ?40, and ?60°C and the remanent polarization at ?20°C (where there was considerably less dc conduction) was 56 mC/m². Switching of the polarization was almost completed within 20 ms.     

X-ray evidence for the absence of 90°-domains in polycrystalline PbTiO3 thin films with grains below a critical size

3 thin films is systematically studied by using X-ray diffraction (XRD). The PbTiO₃ thin films with different average grain sizes were prepared on various substrates by a sol-gel process. The films on NaCl and fused glass are randomly grain-oriented, while those on (111)Pt/Ti/SiO₂/Si are highly {100} cubic index grain-oriented . It is found from the XRD patterns of the films on NaCl that with decreasing average grain size from 230 to 80 nm, the intensities of high h index (h>l) peaks (hkl), such as (100), (110), (200), (201), (210), (211), etc., decrease rapidly and ultimately disappear, whereas another set of peaks (lkh), including (001), (002), (102), (112), etc., are still intense. This interesting result suggests that at grain size below a certain critical size an increasing number of grains no longer show 90°-domains, which is confirmed by TEM observations. Meanwhile, X-ray evidence of such a grain-size-related absence of 90°-domains is also found for PbTiO₃ films on Pt(111) and fused-glass substrates. The volume fractions of single-domain grains (without 90°-domains) in the films are estimated from their XRD patterns. By combining SEM and TEM investigations, the critical grain size for the formation of 90°-domains is further determined to be near 200 nm. Received: 19 December 1996/Accepted: 24 March 1997     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

The phase diagram of the lyotropic nematic mesophase in the TTAB/NaBr/water system

The phase diagram of the nematic mesophase present in the tetradecyltrimethylammonium bromide/sodium bromide/water ternary system was determined. A calamitic nematic mesophase (N_C) was observed which extends to very high concentrations of electrolyte. The order parameters of the surfactant head group in the mesophases were studied by the NMR quadrupolar splitting of the deuterated surfactant. On increasing the temperature of nematic mesophases with low electrolyte concentrations, a phase separation occurs with the formation of a more highly ordered hexagonal phase and an isotropic phase. Diffusion measurements of the isotropic micellar solution by the NMR PFG method were used to estimate hydrodynamic radii at low surfactant concentrations and to study micelle diffusion as the concentration of the surfactant was increased to the liquid crystalline region. At higher surfactant concentrations, the diffusion coefficient reached a limiting value. The calamitic nematic mesophase in this surfactant/electrolyte/water system appears to be formed by long wormlike micelles.     

A Miura of the Painlevé I Equation and Its Discrete Analogs

We present Miura transformations for the continuous and several discrete Painlev\'e I equations. In the case of the continuous P_I, we use the Hamiltonian formulation of the Painlev\'e equations and show that there exists a Miura transformation between P_I and the binomial, second degree, equation of Cosgrove SD_V. In the case of the discrete P_I's we obtain two different kinds of Miuras. One kind relates a d-P_I to some other d-P_I while the other leads to discrete four-point equations which are the discrete analogs of the derivative of Cosgrove's equation SD_V.     

MODELLING AND CONTROL WITH PIEZOACTUATORS FOR A SIMPLY SUPPORTED BEAM UNDER A MOVING MASS

In the paper, the dynamic modelling and control are presented for a simply supported beam under a moving mass. The equations of motion are obtained based on the Euler-Bernoulli beam theory by including the dynamic effect of a moving mass travelling along a vibrating path. The equations of motion are discretized by using the assumed modes method with the static deflection of the beam. In order to reduce the deflection of the beam under a moving mass, a controller with full state feedback is designed based on linearized equations of motion. Two piezoelectric actuators are bonded along the bottom of the beam at different locations determined by the minimization of an optimal cost functional. Numerical simulations are performed with respect to different constant velocities and different moving masses. The controller with two piezoelectric actuators shows excellent performance under unknown disturbances to the system.     

Equilibrium and kinetic surface segregation in binary alloy thin films

A general theoretical analysis of the effect of film thickness on equilibrium and kinetic surface segregation in binary alloy thin films is presented. In this analysis, a constrained condition that represents the finite size of thin film system has been introduced to the modified Darken model, which has been used to describe both equilibrium and kinetic surface segregation in bulk materials. Simulation of surface segregation for alloy thin films can be carried out for all composition ranges and all film thicknesses if only knowing the surface segregation parameters for bulk materials. Simulations of equilibrium and kinetic surface segregation in Cu(1 1 1)Ag binary alloy thin film are presented.     

Singlewall carbon nanotubes covered with polystyrene nanoparticles by in‐situ miniemulsion polymerization

This work is to make carbon nanotubes dispersible in both water and organic solvents without oxidation and cutting nanotube threads. Polystyrene‐singlewall carbon nanotube (PS‐SWNT) composites were prepared with three different methods: miniemulsion polymerization, conventional emulsion polymerization, and mixing SWNT with PS latex. The two factors, crosslinking and surface coverage of PS are important factors for the mechanical and electrical properties, including dispersion states of SWNT in various solvents. The PS‐SWNT composite prepared via a conventional emulsion polymerization showed SWNT bundles entirely covered with PS, whereas the PS‐SWNT composite prepared via a miniemulsion polymerization showed SWNT partially covered with crosslinked PS nanoparticles. The method of mixing SWNTs with PS latex did not show the well dispersed state of carbon nanotubes because PS was not crosslinked and was dissolved in a solvent, and nanotubes separated from PS precipitated. So the PS nanoparticle‐SWNT composite had lower electrical resistance, and higher mechanical strength than the other composites made by the latter two methods. As the amount of SWNT increases, the bare surface area of SWNT increases and the electrical conductivity increases in the composite made by the miniemulsion polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 573–584, 2006     

Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006