Dissipation Behavior and Acute Dietary Risk Assessment of Thiamethoxam and Its Metabolite Clothianidin on Spinach

Thiamethoxam and its metabolite clothianidin residues pose a potential threat to human health. This study aims to investigate the residue behavior and acute dietary risk assessment of thiamethoxam and clothianidin on spinach. Thiamethoxam and clothianidin were extracted using a quick, easy, cheap, effective, rugged, safe (QuEChERS) method and analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS). At spike levels from 0.01 to 5 mg kg⁻¹, the average recoveries of both analytes were in the range of 94.5–105.5%, with relative standard deviations (RSDs) of 3.8–10.9%. The dissipation behavior of thiamethoxam followed first-order kinetics, with half-lives of ≤1.6 days. Clothianidin appeared readily as a plant metabolite with highest level exhibited during 3 to 5 days after application. Temperature and light may be two main factors for degradation of thiamethoxam. Besides, acute risk assessment of thiamethoxam and clothianidin was evaluated with risk quotients (RQs) <100%, which suggested a low health risk for all consumer groups of Chinese residents.     

Structure and Processing Properties of Nine Yam (Dioscorea opposita Thunb) Starches from South China: A Comparison Study

In order to explore the processing and application potential of Chinese yam starch, nine kinds of Chinese yam starch (GY11, GY5, GY2, GXPY, LCY, SFY, MPY, SYPY, ASY) from South China were collected and characterized. The chemical composition, rheological properties, thermal properties, and in vitro starch digestion were compared, and the correlation between the structure and processing properties of these yam starches was analyzed using Pearson correlation. The results show that GY2 had the highest amylose content of 28.70%. All the yam starches were similarly elliptical, and all the yam starch gels showed pseudoplastic behavior. Yam starches showed similar pasting temperatures and resistant starch content, but SYPY showed the largest particle size (28.4 μm), SFY showed the highest setback (2712.33 cp), and LCY showed the highest peak viscosity (6145.67 cp) and breakdown (2672.33 cp). In addition, these yam starches also showed different crystal types (A-type, B-type, C-type), relative crystallinity (26.54–31.48%), the ratios of 1045/1022 cm⁻¹ (0.836–1.213), pasting properties, and rheological properties, so the yam starches have different application potentials. The rheological and pasting properties were related to the structural properties of starch, such as DI, Mw, and particle size, and were also closely related to the thermodynamic properties. The appropriate processing methods and purposes of the processed products of these yam starches can be selected according to their characteristics.     

Selective photocatalytic aerobic oxidation of methane into carbon monoxide over Ag/AgCl@SiO2

Design of active catalysts for chemical utilization of methane under mild conditions is of great importance, but remains a challenging task. Here, we prepared a Ag/AgCl with SiO₂ coating (Ag/AgCl@SiO₂) photocatalyst for methane oxidation to carbon monoxide. High carbon monoxide production (2.3 μmol h⁻¹) and high selectivity (73%) were achieved. SiO₂ plays a key role in the superior performance by increasing the lifetime of the photogenerated charge carriers. Based on a set of semi in situ infrared spectroscopy, electron paramagnetic resonance, and electronic property characterization studies, it is revealed that CH₄ is effectively and selectively oxidized to CO by the in situ formation of singlet ¹O₂via the key intermediate of COOH*. Further study showed that the Ag/AgCl@SiO₂ catalyst could also drive valuable conversion using real sunlight under ambient conditions. As far we know, this is the first work on the application of SiO₂ modified Ag/AgCl in the methane oxidation reaction.

The Ag/AgCl@SiO₂ catalyst exhibits excellent photocatalytic activity in selective aerobic oxidation of methane to carbon monoxide with high selectivity, and extended real light simulation feasibility shows potential in practical application.     

3-甲基环状乙撑磷酸二酯醇解的反应途径的理论研究

采用密度泛函理论和MP2方法研究了3-甲基环状乙撑磷酸二酯(MEP)与甲醇的反应途径:(Ⅰ)CH3O-+MEP;(Ⅱ)CH3OH+MEP;(Ⅲ)CH3O-+HMEP(MEP的质子化形式);(Ⅳ)CH3OH+HMEP.在B3LYP/6-31++G(d,p)水平上优化了四条反应途径的反应物、中间体、过渡态及产物的几何构型,并在同水平上进行了自然电荷分析,然后在MP2/6-311++G(3df,2p)水平上计算了各驻点的单点能.采用极化连续介质模型(PCM)研究了各途径在苯、甲醇和水溶液中的溶剂化效应.计算结果表明,溶剂效应使途径(Ⅰ)的自由能垒降低,而使途径(Ⅱ)和(Ⅳ)的决速步骤的自由能垒升高.在气相和苯溶剂中途径(Ⅳ)是反应的优势途径,在甲醇和水溶剂中途径(Ⅰ)则成为最优.研究结果进一步表明实验条件下途径(Ⅱ)与(Ⅳ)对总醇解反应的贡献相当.     

用芹菜茎生物催化对映选择性还原芳香酮

研究了用芹菜茎薄片在温和与环境友好的条件下催化芳香酮的对映选择性还原反应.制备得到具有光学活性的(S)-1-芳基醇,产物的对映选择性符合Prelog规则.考察了pH值、反应时间、反应温度、底物浓度等因素对底物芳香酮的转化率和产物(S)-1-芳基醇的对映体过量值的影响,并优化了这些反应条件.文中还研究了底物的构效关系,发现羰基两边取代基的空间效应和电子效应明显影响底物的转化率和产物的对映体过量值.在合适的条件下底物苯乙酮的转化率高达100%,产物(S)-1-苯基乙醇的对映体过量值大于99.0%.苯丙酮、对甲基苯乙酮和对氯苯乙酮等其它芳香酮的转化率达到中等程度,但所得(S)-1.芳基醇的最大对映体过量值均大于99.0%.     

Trace determination of hexabromocyclododecane diastereomers in water samples with temperature controlled ionic liquid dispersive liquid phase microextraction

A novel temperature controlled ionic liquid dispersive liquid phase microextraction(TCIL-DLPME) coupled with rapid resolution liquid chromatography-electrospray tandem mass spectrometry(RRLC-ESI-MS-MS) has been developed for the enrichment and determination of three hexabromocyclododecane diastereomers(HBCDs) in water samples.Green solvent ionic liquid(IL) was used as extraction solvent instead of toxic organic solvents.This technique also avoided the usage of dispersive solvent.Some important parameters that might affect the extraction efficiency were optimized.Under the optimum conditions,good linear relationship,sensitivity and reproducibility were obtained.All the limits of detection for the three diastereomers were 0.1 ng/ mL.The linear range was obtained in the range of 1-100 ng/mL for the total amount of three HBCD diastereomers.It was satisfactory to analyze real environmental water samples with the recoveries ranging from 77.2%to 99.3%.The main advantage of the method is toxic organic solvent-free.     

常用玻璃量器检定注意事项

总结了常用玻璃量器检定过程中的注意事项,讨论了外观检查、清洁度、涂抹油脂、温度控制、液面观察方法对常用玻璃量器检定结果的影响,其中定容时是否使用黑色遮光带造成的影响最大。     

反相高效液相色谱法测定肾复康胶囊中的野黄芩苷和芦丁

建立了肾复康胶囊中野黄芩苷和芦丁的反相高效液相色谱测定方法。以甲醇-水为提取溶剂,采用超声提取法对样品进行前处理。以0.02 mol/L磷酸二氢钾缓冲溶液(含1.0％（体积分数）冰醋酸)-甲醇（体积比为63∶37）为流动相,于330 nm波长下检测,肾复康提取液中野黄芩苷和芦丁可达基线分离,分析时间在20 min内。野黄芩苷和芦丁在10 ~300 mg/L内,其峰面积与浓度之间线性关系良好,目标物的加标回收率大于98％。该方法适用于肾复康胶囊及相关药材中野黄芩苷和芦丁黄酮类化合物的测定和质量控制。     

中性线修正型变截面梁类构件压电控制

传统绝对节点坐标法(absolute nodal coordinate formulation,ANCF)在变截面梁类构件建模过程中常以几何中位线等效构造单元中性线,难以对变截面单元位移场状态进行精确描述.为解决此类问题,本文以中细型变截面梁类构件为研究对象,深入考虑变截面结构几何因素及复合材料属性对变截面梁类构件中性...