Thermodynamic molecular switch in sequence‐specific hydrophobic interactions

This communication will demonstrate the existence of a thermodynamic molecular switch in the pairwise, sequence‐specific hydrophobic interaction of Ile–Ile, Leu–Ile, Val–Leu, or Ala–Leu over the temperature range of 273–333 K reported by Nemethy and Scheraga in 1962. Based on Chun's development of the Planck–Benzinger methodology, the change in inherent chemical bond energy at 0 K, ΔH°(T₀), is 3.0 kcal mol^?1 for Ile–Ile, 2.4 for Leu–Ile, 1.8 for Val–Leu, and 1.2 kcal mol^?1 for Ala–Leu. The value of ΔH°(T₀) decreases as the length of the hydrophobic side chain decreases. It is clear that the strength and stability of the hydrophobic interaction is determined by the packing density of the side chains, with Ala–Leu being the most stable. At 〈T_m〉, the thermal agitation energy, $\int^{T}_{0}\Delta Cp^{\circ}(T)\,dT$, is about five times greater than ΔH°(T₀) in each case. Additionally, the thermal agitation energy for the same series, evaluated at 〈T_m〉, decreases in the same order, that is, as the length of the side chain decreases. This pairwise, sequence‐specific hydrophobic interaction is highly similar in its thermodynamic behavior to that of other biological systems, except that the negative Gibbs free energy change minimum at 〈T_s〉 occurs at a considerably higher temperature, 355 K compared to about 300 K. The melting temperature, 〈T_m〉, is also high, 470 K compared to 343 K in a biological system. The implication is that the negative Gibbs free energy minimum at a well‐defined 〈T_s〉 has it origin in the hydrophobic interactions, which are highly dependent on details of molecular structure. In addition to the four specific dipeptide interactions described, we have shown in our unpublished work the existence of a thermodynamic molecular switch in the interactions of 32 dipeptides wherein a change of sign in ΔCp°(T)_reaction leads to a true negative minimum in the Gibbs free energy of reaction, and hence, a maximum in the related K_eq. Indeed, all interacting biological systems that we have thus far examined using the Planck–Benzinger approach point to the universality of thermodynamic molecular switches. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

紫荆花红色素开发利用的研究

首次报道紫荆花红色素的提取纯化方法及红色素的理化性质，并与玫瑰茄红色素作对比研究，证实同属于花青甙类化合物，又经急性毒性试验证明其毒性极低，故紫荆花天然红色素具有开发利用的价值。     

Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

水中矿物元素的ICP-MS分析

用ICP－MS对地下水、地表水和饮用水中的矿物元素进行了分析测定，实验证明用ICP－MS可以同时测定地下水，地表水和饮用水中矿物元素；该法灵敏度、精密度和准确度都能满足有关标准的要求，具有多元素同时分析，样品前处理简单，干扰少，测定快速，省事省力等优点。     

甲壳素铁卟啉制备及其催化空气氧化环己烷研究

首次采用甲壳素和四苯基铁卟啉制备高分子金属卟啉固载物 甲壳素四苯基铁卟啉 ,并用电镜 ,紫外和红外光谱技术对它进行表征 ,测定了铁卟啉在甲壳素上的表观吸附常数 ,研究了其催化性能 .研究结果表明 :四苯基铁卟啉能牢固地固载在甲壳素上 ,其表观吸附常数为 6 .80× 10 4L·mol-1.在无溶剂 ,无助催化剂和还原剂的体系中 ,它能高效催化空气氧化环己烷生成环己酮和环己醇 ,在 4 18K和 0 .8MPa的反应条件下 ,环己醇和环己酮选择性为 74 .5 % ,环己烷的摩尔转化率为 14 .79% ,催化剂转化数达到 3.80× 10 5.相对未固载的四苯基铁卟啉催化剂转化数 (按铁卟啉计 )提高了 2 1倍 .     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.     

Multilevel structure of sludge flocs

In this work, the structure of two kaolin sludges and a waste activated sludge are investigated using both light-scattering and free-settling methods. Fractal dimensions estimated by the light-scattering and free-settling techniques (D(S) and D(F) respectively) differ significantly and support the hypothesis that naturally occurring aggregates possess a multilevel structure. A two-level floc structural model comprised of (i) a primary floc (of fractal dimension D(S)) consisting of primary particles and (ii) a secondary floc (of fractal dimension D(F)) consisting of the microflocs is proposed to interpret the experimental findings. The structural changes of sludge flocs before and after cationic flocculation are interpreted using the proposed two-level model.     

丙酮在XeCl准分子激光辐射下的多光子电离和碎裂研究

我们用扩散分子束多光子电离光谱技术研究了丙酮在XeCl准分子激光辐射下的多光子电离和碎裂行为。实验表明丙酮没有产生母体离子峰(m/e=58), 只给出m/e=43和15两个峰, 分别对应于丙酮光解所产生的两个碎片CH_3 CO和CH_3。其离子信号(1)分别与激光强度(Ⅰ)的3和3.6次方成正比。分析表明离子是由中性碎片电离产生的。