First‐Principles Investigation of Anisotropic Electron and Hole Mobility in Heterocyclic Oligomer Crystals

Based on quantum chemistry calculations combined with the Marcus–Hush electron transfer theory, we investigated the charge‐transport properties of oligothiophenes (nTs) and oligopyrroles (nPs) (n=6, 7, 8) as potential p‐ or n‐type organic semiconductor materials. The results of our calculations indicate that 1) the nPs show intrinsic hole mobilities as high as or even higher than those of nTs, and 2) the vertical ionization potentials (VIPs) of the nPs are about 0.6–0.7 eV smaller than the corresponding VIPs of the nTs. Based on their charge‐transport ability and hole‐injection efficiency, the nPs have potential as p‐type organic semiconducting materials. Furthermore, it was also found that the maximum values of the electron‐transfer mobility for the nTs are larger by one‐to‐two orders of magnitude than the corresponding maximum values of hole‐transfer mobility, which suggests that the nTs have the potential to be developed as promising n‐type organic semiconducting materials owing to their electron mobility.     

The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Determination of trace amounts of chromium (VI) by flow injection analysis with chemiluminescence detection

A new sensitive chemiluminescence (CL) method combined with continuous flow injection analysis is described for the determination of Cr(VI). Strong CL signals were generated by Cr(VI)-catalysed oxidation of gallic acid in the presence of potassium permanganate and hydrogen peroxide. Effects of reagent concentrations, temperature, pH, flow rates, mixing coil length and mixing flow sequences on the chemiluminescence intensity were studied. Under the optimised experimental conditions, the relationship between the logarithm of concentration (log?C) of Cr(VI) and the logarithm of intensity (log?I) is linear over the range of 2?×?10^?11 – 5?×?10^?4?mol?L^?1, with the detection limit (3σ) of 4?×?10^?12?mol?L^?1. Relative standard deviation of ten measurements of 1?×?10^?9?mol?L^?1 Cr(VI) is 1.7%. This flow injection analysis (FIA) system proved to be able to analyse up to 40 samples h^?1. Effects of various interferences possibly present in the water samples were investigated. Most cations and anions, as well as organic compounds, did not interfere with the determination of Cr(VI) in water samples. The experimental results obtained for chromium in reference materials were also in good agreement with the certified values.     

SELECTIVE S-ALKYLATION IN PHASE TRANSFER CATALYSIS OF 2-PYRIDINE-, -PYRIMIDINE- AND BENZOXAZOLE-THIONE

Abstract

Alkylation via phase transfer catalysis of several ambident anions of the |N–C–S|^? type leads exclusively to S-substitution. Yields obtained are better or equal to those given by conventional methods and experimental work-up is very much simplified compared to the latter.     

内吸性杀菌剂三唑醇(酮)立体异构体的研究(Ⅱ)

确定了拆分三唑醇A、B两非对称异构体所形成的非对映中间体的结构,并得到100%光学纯的三唑醇右旋A体。经X-射线法等确定其绝对构型为(+)1R,2s,由Jones氧化反应得到100%光学纯的三唑酮右旋体,利用格氏氢转移反应对右旋三唑酮进行不对称还原得三唑醇的不同光学异构体。对小麦叶锈病的生物活性测定表明三唑醇中(-)-A-1S,2R的生物活性最高;三唑酮中,左右旋体的活性相当。     

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO₂) reduction half-reaction and the water (H₂O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust −C=C− bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron–hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO₂ reduction and photogenerated holes that participate in H₂O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 μmol g⁻¹ h⁻¹ with about 100 % selectivity) and oxygen (O₂) evolution (90.2 μmol g⁻¹ h⁻¹) among all the porous catalysts in CO₂ reduction with H₂O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure–function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.     

铁苯基膦配合物均相催化乙酰丙酸乙酯与甲酸反应转化为γ-戊内酯的分子机制

本文基于密度泛函理论,计算了Fe(CF3SO3)2/PP3催化乙酰丙酸乙酯与甲酸反应转化为γ-戊内酯的反应机理。分析了单重态和三重态反应路径的热力学和动力学性质,结果表明除了预催化剂活化出现势能面交叉外,反应主要在三重态势能面上进行,包括以下几个步骤：甲酸盐配位方式重置,β-H消除得到活性催化剂[FeH(PP3)]+,接着乙酰丙酸乙酯的羰基碳和羰基氧接连被质子化得到中间体4-羟基戊酸乙酯,最后质子化的反离子CF3SO3H作为氢转移梭子协助分子内脱醇—关环生成目标产物γ-戊内酯。进一步探讨不同金属苯基膦配合物的催化活性,证实金属适宜的配位能力是筛选催化剂的关键。理论计算结果为优化设计高性能的生物质转化催化剂提供一定的理论指导。     

Synchronous Dual Electrolyte Additive Sustains Zn Metal Anode with 5600 h Lifespan

Despite conspicuous merits of Zn metal anodes, the commercialization is still handicapped by rampant dendrite formation and notorious side reaction. Manipulating the nucleation mode and deposition orientation of Zn is a key to rendering stabilized Zn anodes. Here, a dual electrolyte additive strategy is put forward via the direct cooperation of xylitol (XY) and graphene oxide (GO) species into typical zinc sulfate electrolyte. As verified by molecular dynamics simulations, the incorporated XY molecules could regulate the solvation structure of Zn²⁺, thus inhibiting hydrogen evolution and side reactions. The self-assembled GO layer is in favor of facilitating the desolvation process to accelerate reaction kinetics. Progressive nucleation and orientational deposition can be realized under the synergistic modulation, enabling a dense and uniform Zn deposition. Consequently, symmetric cell based on dual additives harvests a highly reversible cycling of 5600 h at 1.0 mA cm⁻²/1.0 mAh cm⁻².     

Design Rules for Two-Dimensional Organic Semiconductor-Incorporated Perovskites (OSiP) Gleaned from Thousands of Simulated Structures**

Two-dimensional (2D) halide perovskites are an attractive class of hybrid perovskites that have additional optoelectronic tunability due to their accommodation of relatively large organic ligands. Nevertheless, contemporary ligand design depends on either expensive trial-and-error testing of whether a ligand can be integrated within the lattice or conservative heuristics that unduly limit the scope of ligand chemistries. Here, the structural determinants of stable ligand incorporation within Ruddlesden-Popper (RP) phase perovskites are established by molecular dynamics (MD) simulations of over ten-thousand RP-phase perovskites and training of machine learning classifiers capable of predicting structural stability based solely on generalizable ligand features. The simulation results show near-perfect predictions of positive and negative literature examples, predict trade-offs between several ligand features and stability, and ultimately predict an inexhaustibly large 2D-compatible ligand design-space.     

Lattice Distortion and H-passivation in Pure Carbon Electrocatalysts for Efficient and Stable Two-electron Oxygen Reduction to H2O2

The exploration of inexpensive and efficient catalysts for oxygen reduction reaction (ORR) is crucial for chemical and energy industries. Carbon materials have been proved promising with different catalysts enabling 2 and 4e⁻ ORR. Nevertheless, their ORR activity and selectivity is still complex and under debate in many cases. Many structures of these active carbon materials are also chemically unstable for practical implementations. Unlike the well-discussed structures, this work presents a strategy to promote efficient and stable 2e⁻ ORR of carbon materials through the synergistic effect of lattice distortion and H-passivation (on the distorted structure). We show how these structures can be formed on carbon cloth, and how the reproducible chemical adsorption can be realized on these structures for efficient and stable H₂O₂ production. The work here gives not only new understandings on the 2e⁻ ORR catalysis, but also the robust catalyst which can be directly used in industry.