Short-Range Inverse-Square Law Experiment in Space

The objective of ISLES (Inverse-Square Law Experiment in Space) is to perform a null test of Newton's law in space with a resolution of one part in 10⁵ or better at 100 m. ISLES will be sensitive enough to detect axions with the strongest allowed coupling and probe large extra dimensions of string theory down to a few m. The experiment will be cooled to 2 K, which permits superconducting magnetic levitation of the test masses. This soft, low-loss suspension, combined with a low-noise SQUID, leads to extremely low intrinsic noise in the detector. To minimize Newtonian errors, ISLES employs a near null source, a circular disk of large diameter-to-thickness ratio. Two test masses, also disk-shaped, are suspended on the two sides of the source mass at a nominal distance of 100 m. The signal is detected by a superconducting differential accelerometer.     

Mobility of electrons and holes in an n-type organic semiconductor perylene diimide thin film

N,N′-diphenylbutyl-3,4,9,10-perylenebiscarboximide (PTCDI-C4Ph) were characterized by optical and electrochemical methods. A device with an ITO/PTCDI-C4Ph (≈2 μm)/Al structure was fabricated to measure mobility by time-of-flight techniques. This vacuum deposited organic layer was an amorphous state. Electrons were observed faster than holes. The electron and hole mobilities were 1.8 × 10⁻⁴ cm²/V s and 1.1 × 10⁻⁴ cm²/V s under the electric field of 500 (V/cm)^1/2, respectively. This result shows that this organic compound is a good candidate for an n-type conduction.     

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.     

Magneto-optical trapping of Stark-slowed metastable He atoms

We report on the first successful loading of a magneto-optical trap (MOT) with metastable He atoms from a Stark-slower. Thereby, deceleration of the atoms relies on laser-atom interaction in an inhomogeneous electric field. We show that the results obtained are comparable with early results from other groups achieved with a Zeeman slower. The Stark slower, which is able to fully control the final velocity of the atomic He beam, is the first step in achieving complete spin independent kinematic control based solely on electric fields. Received 2 October 2002 / Received in final form 20 January 2003 Published online 29 April 2003 RID="a" ID="a"e-mail: eichmann@mbi-berlin.de     

Diffusion barrier performance of TiVCr alloy film in Cu metallization

In this study, 15 nm-thick sputter-deposited TiVCr alloy thin films were developed as diffusion barrier layers for Cu interconnects. The TiVCr alloy film tends to form a solid solution and a simple crystal structure from the constituted elements. Under TEM, the 15 nm-thick as-deposited TiVCr alloy film was observed to have a dense semi-amorphous or nanocrystalline structure. In conjunction with X-ray diffraction, transmission electron microscopy, and energy-dispersive spectroscopy analyses, the Si/TiVCr/Cu film stack remained stable at a high temperature of 700 °C for 30 min. The electrical resistance of Si/TiVCr/Cu film stack remained as low as the as-deposited value. These indicated that the mixed TiVCr refractory elements’ alloy barrier layer is very beneficial to prevent Cu diffusion.     

Photoluminescence properties of a new Eu2+-activated CaLaGa3S7 yellowish-green phosphor for white LED applications

A thiogallate chalcogenide phosphor CaLaGa₃S₇:Eu²⁺ was synthesized by a solid-state reaction at 950 °C in a H₂S atmosphere. The photoluminescence excitation,emission spectra, concentration quenching, fluorescence lifetime, and thermal quenching process of the phosphor were investigated in detail. It was found that the synthesized phosphor emitted intense and broadband yellowish-green light with a peak at 554 nm. Thus, the proposed phosphor is suitable for the development of blue or near UV LED. The critical dopant concentration of Eu²⁺ (R_c=15 Å) per unit formula was found to be 0.15 mol. At room temperature, the fluorescence lifetime of Eu²⁺ in CaLaGa₃S₇ was found to be 0.216 μs. The activation energy for thermal quenching was 0.29 eV. The chromaticity coordinates of our phosphor is very close in color to Y₃Al₅O₁₂:Ce³⁺. Therefore, CaLaGa₃S₇:Eu²⁺ can be a good alternative as a yellowish-green phosphor and can be used for white light generation in phosphor-converted LEDs.     

Polymorphic phase transition and thermal stability in squaric acid (H2C4O4)

Phase transformations in squaric acid (H₂C₄O₄) have been investigated by thermogravimetry and differential scanning calorimetry with different heating rates β. The mass loss in TG apparently begins at onset temperatures T_di=245±5 °C (β=5 °C min^?1), 262±5 °C (β=10 °C min^?1), and 275±5 °C (β=20 °C min^?1). A polymorphic phase transition was recognized as a weak endothermic peak in DSC around 101 °C (T_c⁺). Further heating with β=10 °C min^?1 in DSC revealed deviation of the baseline around 310 °C (T_i), and a large unusual exothermic peak around 355 °C (T_p), which are interpreted as an onset and a peak temperature of thermal decomposition, respectively. The activation energy of the thermal decomposition was obtained by employing relevant models. Thermal decomposition was recognized as a carbonization process, resulting in amorphous carbon.     

Self-starting 6.5-fs pulses from a Ti:sapphire laser

We demonstrate self-starting 6.5-fs pulses from a Kerr-lens mode-locked Ti:sapphire laser with 200-mW average output power at a pulse repetition rate of ~86 M Hz. This is to our knowledge the shortest pulse ever generated directly from a laser. For dispersion compensation we used a prism pair in combination with double-chirped mirrors, which balances the higher-order dispersion of the prism pair and therefore flattens the average total group-delay dispersion in the laser cavity. For self-starting mode locking we used a broadband semiconductor saturable-absorber mirror.     

Group-velocity-matched cascaded quadratic nonlinearities of femtosecond pulses in periodically poled MgO:LiNbO3

Large nonlinear phase shifts were generated with femtosecond pulses at 1560 nm through cascaded quadratic interactions in periodically poled MgO-doped LiNbO3. The off-diagonal component of the nonlinear coefficient was utilized for simultaneous quasi phase matching and group-velocity matching. The effective nonlinear refractive index was varied from -2.9 x 10(-14) to +3.3 x 10(-14) cm2/W by tuning the phase-mismatch conditions.